Since these variables refer to the latest version of PyPy, compared to
the similarly named `PYPY27` and `PYPY36` variables (ie same name except
without the underscore) which refer to the major/minor version only.
The similar names caused me to use the wrong one locally whilst working
on another PR, which was caught by tests but demonstrates why we should
rename them.
Closes @W-7935256@.
[skip changelog]
Previously if an app was using an older version of PyPy, the buildpack
would show a confusing "Could not find that version" message (even
though the version was found), when it really meant to warn about there
being a newer release available.
It looks like the version check messages were perhaps copied and pasted
from something else, but the message wording not updated at the time.
I've also added tests since there were none for this feature.
Fixes#1004.
Closes @W-7918745@.
Updates pip from 20.0.2 to 20.1.1 for Python 2.7 and Python 3.5+:
https://pip.pypa.io/en/stable/news/#id40
The version used for Python 3.4 remains unchanged at 19.1.1, since it's
the last version of pip that supports it.
Pip has been updated to 20.1.1 rather than the recently released 20.2,
since the latter has a few regressions and even though these will be
fixed shortly in 20.2.1, we should let the changes soak for longer
before picking them up.
The `PIP_NO_PYTHON_VERSION_WARNING` environment variable has been set
(equivalent to passing `--no-python-version-warning`) to prevent the
Python 2.7 EOL warnings added in pip 20.1 from spamming the build log:
https://github.com/pypa/pip/blob/20.1.1/src/pip/_internal/cli/base_command.py#L139-L154
This was set via environment variable rather than CLI flag, since:
* otherwise we'd have to pass it to every pip invocation
* older pip (such as the 19.1.1 used by Python 3.4) doesn't support this
option and would error out due to an unknown CLI flag being passed,
unless we added conditional flags throughout.
The new pip wheel was uploaded to S3 using:
```
$ pip download --no-cache pip==20.1.1
Collecting pip==20.1.1
Downloading pip-20.1.1-py2.py3-none-any.whl (1.5 MB)
Saved ./pip-20.1.1-py2.py3-none-any.whl
Successfully downloaded pip
$ aws s3 sync . s3://lang-python/common/ --exclude "*" --include "*.whl" --acl public-read --dryrun
(dryrun) upload: ./pip-20.1.1-py2.py3-none-any.whl to s3://lang-python/common/pip-20.1.1-py2.py3-none-any.whl
$ aws s3 sync . s3://lang-python/common/ --exclude "*" --include "*.whl" --acl public-read
upload: ./pip-20.1.1-py2.py3-none-any.whl to s3://lang-python/common/pip-20.1.1-py2.py3-none-any.whl
```
Fixes#1005.
@W-7659489@
Upgrades setuptools from 39.0.1 to:
- 44.1.1 for Python 2.7 (since it's the last supported version)
- 43.0.0 for Python 3.4 (since it's the last supported version)
- 47.1.1 for Python 3.5+ (since we can't use 47.2.0+ until #1006 fixed)
https://setuptools.readthedocs.io/en/latest/history.html#v47-1-1Fixes#949.
Closes#973.
They are now displayed in the build output (instead of being sent to
`/dev/null`) and fail the build early instead of failing later in
`bin/steps/pip-install`.
Fixes#1002.
Since the version check is redundant given we control/choose the version.
The pip cache is redundant since we instead cache site-packages. The pip
cache also ends up in `/app` so isn't included in the build cache anyway.
`get-pip.py` is no longer used, since:
- It uses `--force-reinstall`, which is unnecessary here and slows down
repeat builds (given we call pip install every time now). Trying to
work around this by using `get-pip.py` only for the initial install,
and real pip for subsequent updates would mean we lose protection
against cached broken installs, plus significantly increase the
version combinations test matrix.
- It means downloading pip twice (once embedded in `get-pip.py`, and
again during the install, since `get-pip.py` can't install the
embedded version directly).
- We would still have to manage several versions of `get-pip.py`, to
support older Pythons (once we upgrade to newer pip).
We don't use `ensurepip` since:
- not all of the previously generated Python runtimes on S3 include it.
- we would still have to upgrade pip/setuptools afterwards.
- the versions of pip/setuptools bundled with ensurepip differ greatly
depending on Python version, and we could easily start using a CLI
flag for the first pip install before upgrade that isn't supported on
all versions, without even knowing it (unless we test against hundreds
of Python archives).
Instead we install pip using itself in wheel form. See:
https://github.com/pypa/pip/issues/2351#issuecomment-69994524
The new pip wheel assets on S3 were generated using:
```
$ pip download --no-cache pip==19.1.1
Collecting pip==19.1.1
Downloading pip-19.1.1-py2.py3-none-any.whl (1.4 MB)
Saved ./pip-19.1.1-py2.py3-none-any.whl
Successfully downloaded pip
$ pip download --no-cache pip==20.0.2
Collecting pip==20.0.2
Downloading pip-20.0.2-py2.py3-none-any.whl (1.4 MB)
Saved ./pip-20.0.2-py2.py3-none-any.whl
Successfully downloaded pip
$ aws s3 sync . s3://lang-python/common/ --exclude "*" --include "*.whl" --acl public-read --dryrun
(dryrun) upload: ./pip-19.1.1-py2.py3-none-any.whl to s3://lang-python/common/pip-19.1.1-py2.py3-none-any.whl
(dryrun) upload: ./pip-20.0.2-py2.py3-none-any.whl to s3://lang-python/common/pip-20.0.2-py2.py3-none-any.whl
$ aws s3 sync . s3://lang-python/common/ --exclude "*" --include "*.whl" --acl public-read
upload: ./pip-19.1.1-py2.py3-none-any.whl to s3://lang-python/common/pip-19.1.1-py2.py3-none-any.whl
upload: ./pip-20.0.2-py2.py3-none-any.whl to s3://lang-python/common/pip-20.0.2-py2.py3-none-any.whl
```
Previously the pip/setuptools/wheel install step was skipped so long
as Python hadn't just been clean installed (ie so long as not a new app,
emptied cache, Python upgrade, stack change) and pip was the expected
version.
This meant that setuptool/wheel could be the wrong version (or even just
not installed at all), and this would not be corrected.
Now, we now use pip itself to determine whether the installed packages
are up to date, since parsing pip's output is fragile (eg #1003) and
would be tedious given there would be three packages to check.
Unfortunately `get-pip.py` uses `--force-reinstall` which means
performing this step every time is not the no-op it would otherwise be,
but this will be resolved by switching away from `get-pip.py` in the
next commit.
Fixes#1000.
Fixes#1003.
Closes#999.
Since `get-pip.py` / pip will automatically detect and remove old
pip/setuptools versions if needed, so removing them manually is both not
necessary and slows down the build in the case where the pip version
changed, but setuptools remained the same.
Before:
- if `wheel` was not already installed, then `get-pip.py` would
automatically install the latest version on PyPI, which is `0.34.2`
(or `0.33.6` for Python 3.4).
- if `wheel` was already installed, then it was left unchanged
regardless of the version installed.
Now:
- if `wheel` is not already installed, then the same versions will be
installed as before, except these versions are pinned and will now not
change unexpectedly after future `wheel` releases.
- if `wheel` is already installed, then it's upgraded/downgraded to the
target version as needed.
Partly addresses #1000, though this change only helps builds where the
pip/setuptools/wheel install flow is triggered (currently only new apps
or ones where Python was purged or pip was not the correct version).
Since the wheel version is now known, it's output to the build log to
ease debugging and for parity with pip/setuptools.
The rest of #1000 will be fixed in later commits.
Since:
* we'll be updating setuptools soon, and newer setuptools has dropped
support for Python versions this buildpack needs to support. As such
if we continued to vendor setuptools, we would need to vendor at
least three different versions.
* we want to try and update setuptools more frequently than we have
in the past, which will mean more repo bloat from binary churn.
* we're still pinning to a specific version, meaning vendoring doesn't
have determinism benefits.
* setuptools is only fetched from PyPI for new installs (or where
versions have changed), so this doesn't increase build time, load on
PyPI, or reliance on PyPI in the common case.
* setuptools is already being inadvertently installed from PyPI prior to
being installed from the vendored copy (see #1001), so we're in effect
already using/depending on PyPI here.
* switching to storing setuptools on S3 wouldn't help reliability as
much as it would appear at first glance, since the later `pip install`
of customer dependencies will fail if PyPI is down anyway.
Since:
* "explicit is better than implicit"
* we'll soon be upgrading setuptools, and debugging breakage caused by
upgrades will be easier if versions are visible in the build log
Since:
* "explicit is better than implicit"
* we'll soon be upgrading pip, and debugging breakage caused by upgrades
will be easier if versions are visible in the build log
Closes#939.
The following env vars are no longer exposed to subprocesses run by the
buildpack (such as the `bin/pre_compile` and `bin/post_compile` hooks):
* `BPLOG_PREFIX`
* `CACHED_PYTHON_STACK`
* `DEFAULT_PYTHON_STACK`
* `DEFAULT_PYTHON_VERSION`
* `LATEST_27`
* `LATEST_34`
* `LATEST_35`
* `LATEST_36`
* `LATEST_37`
* `LATEST_38`
* `PIP_UPDATE`
* `PY27`
* `PY34`
* `PY35`
* `PY36`
* `PY37`
* `PYPY_27`
* `PYPY_36`
* `RECOMMENDED_PYTHON_VERSION`
* `WARNINGS_LOG`
There were previously no tests at all for the pre/post-compile hooks,
so I've added some now.
Fixes#1010.
Adds support for:
* CPython 2.7.18, 3.5.9, 3.7.7 and 3.8.3
* PyPy 2.7 and 3.6, version 7.3.1
The binaries will need generating and uploading before CI will pass.
Note: Whilst the build script for CPython 3.8.3 did already exist in the
repository, it appears to have been accidentally created in #920, which
predated the existence of that version of Python - so the binaries do
not exist on S3.
The Heroku-18 Docker image tag has also been unpinned, since the new
libssl version is now available at runtime in all environments, so we
don't need to force building against the older version of the headers.
Fixes W-7582174.
* Add support for Python 3.8 latest version
If the pip lock file only specifies `3.8` and no bug fix version, it should use Python LATEST_38.
* Update CHANGELOG.md
* Update changelog
Co-authored-by: Johannes Hoppe <info@johanneshoppe.com>
Co-authored-by: Casey <caseylfaist@gmail.com>
* Don't clear the cache on first app deploy
* Add output for debugging cache behavior
* Debug output of changes, clean up whitespace
* Update hatchet to use latest getting started guide
* Clean up caching output logs
This output was confusing and unhelptul to most users
* Changelog
* Test if we need these lines
* dang fi
* Remove unnecessary code
* Remove confusing output of change
* Update log output
* Update test to match new expected log output
* Update changelog
Ed Morley