Default Python: 2.7.8

Readme: Update Python versions to match compile

Makefile

@@ -1,21 +1,5 @@
+# These targets are not files
+.PHONY: tests
+
 tests:
 	./bin/test
-
-docs:
-	mkdir -p site
-	shocco -t 'Python Buildpack Compiler' ./bin/compile > site/index.html
-	shocco -t 'Django Buildpack Compiler' ./bin/steps/django > site/django.html
-	shocco -t 'Python Buildpack Detector' ./bin/detect > site/detect.html
-	shocco -t 'Pylibmc Buildpack Compiler' ./bin/steps/pylibmc > site/pylibmc.html
-	shocco -t 'Python Buildpack Changelog' ./Changelog.md > site/changelog.html
-
-site: docs
-	cd site && git add -A && git commit -m 'update' && git push heroku master
-
-pip:
-	git clone git@github.com:kennethreitz/pip.git --branch heroku --depth 1
-	rm -fr vendor/virtualenv-1.8.4/virtualenv_support/pip-1.2.1.tar.gz
-	rm -fr pip/.git
-	tar -pczf vendor/virtualenv-1.8.4/virtualenv_support/pip-1.2.1.tar.gz pip
-	rm -fr pip
-

Readme.md

@@ -3,7 +3,6 @@ Heroku buildpack: Python
 
 This is a [Heroku buildpack](http://devcenter.heroku.com/articles/buildpacks) for Python apps, powered by [pip](http://www.pip-installer.org/).
 
-[![Build Status](https://secure.travis-ci.org/heroku/heroku-buildpack-python.png?branch=master)](http://travis-ci.org/heroku/heroku-buildpack-python)
 
 Usage
 -----
@@ -13,31 +12,30 @@ Example usage:
     $ ls
     Procfile  requirements.txt  web.py
 
-    $ heroku create --stack cedar --buildpack git://github.com/heroku/heroku-buildpack-python.git
+    $ heroku create --buildpack git://github.com/heroku/heroku-buildpack-python.git
 
     $ git push heroku master
     ...
-    -----> Fetching custom git buildpack... done
     -----> Python app detected
-    -----> No runtime.txt provided; assuming python-2.7.3.
-    -----> Preparing Python runtime (python-2.7.3)
-    -----> Installing Distribute (0.6.34)
-    -----> Installing Pip (1.2.1)
-    -----> Installing dependencies using Pip (1.2.1)
-           Downloading/unpacking Flask==0.7.2 (from -r requirements.txt (line 1))
-           Downloading/unpacking Werkzeug>=0.6.1 (from Flask==0.7.2->-r requirements.txt (line 1))
-           Downloading/unpacking Jinja2>=2.4 (from Flask==0.7.2->-r requirements.txt (line 1))
-           Installing collected packages: Flask, Werkzeug, Jinja2
-           Successfully installed Flask Werkzeug Jinja2
+    -----> No runtime.txt provided; assuming python-2.7.8.
+    -----> Preparing Python runtime (python-2.7.8)
+    -----> Installing Setuptools (3.6)
+    -----> Installing Pip (1.5.6)
+    -----> Installing dependencies using Pip (1.5.6)
+           Downloading/unpacking requests (from -r requirements.txt (line 1))
+           Installing collected packages: requests
+           Successfully installed requests
            Cleaning up...
+    -----> Discovering process types
+           Procfile declares types -> (none)
 
 You can also add it to upcoming builds of an existing application:
 
     $ heroku config:add BUILDPACK_URL=git://github.com/heroku/heroku-buildpack-python.git
 
-The buildpack will detect your app as Python if it has the file `requirements.txt` in the root. 
+The buildpack will detect your app as Python if it has the file `requirements.txt` in the root.
 
-It will use Pip to install your dependencies, vendoring a copy of the Python runtime into your slug. 
+It will use Pip to install your dependencies, vendoring a copy of the Python runtime into your slug.
 
 Specify a Runtime
 -----------------
@@ -45,10 +43,12 @@ Specify a Runtime
 You can also provide arbitrary releases Python with a `runtime.txt` file.
 
     $ cat runtime.txt
-    python-3.3.0
-    
+    python-3.4.1
+
 Runtime options include:
 
-- python-2.7.3
-- python-3.3.0
+- python-2.7.8
+- python-3.4.1
 - pypy-1.9 (experimental)
+
+Other [unsupported runtimes](https://github.com/heroku/heroku-buildpack-python/tree/master/builds/runtimes) are available as well.

bin/compile

@@ -1,33 +1,8 @@
-fp#!/usr/bin/env bash
+#!/usr/bin/env bash
 
-# This script serves as the
-# [**Python Buildpack**](https://github.com/heroku/heroku-buildpack-python)
-# compiler.
+# Usage:
 #
-# A [buildpack](http://devcenter.heroku.com/articles/buildpacks) is an
-# adapter between a Python application and Heroku's runtime.
-#
-# You can intreract with the Heroku API directly with [heroku.py](https://github.com/heroku/heroku.py/).
-#
-# See also: [Release history](/changelog.html), [Detection](/detect.html).
-#
-# ## Usage
-# Compiling an app into a slug is simple:
-#
-#     $ bin/compile <build-dir> <cache-dir>
-
-
-# ## Assumptions
-#
-# This buildpack makes the following assumptions:
-#
-# - The desired Python VM is available on the base system.
-# - Library dependencies are available on the base system.
-# - Django applications should not require any platform-specific configuration.
-
-# <hr />
-
-# ## Context
+#     $ bin/compile <build-dir> <cache-dir> <env-path>
 
 # Fail fast and fail hard.
 set -eo pipefail
@@ -40,6 +15,8 @@ BIN_DIR=$(cd $(dirname $0); pwd) # absolute path
 ROOT_DIR=$(dirname $BIN_DIR)
 BUILD_DIR=$1
 CACHE_DIR=$2
+ENV_DIR=$3
+
 
 CACHED_DIRS=".heroku"
 
@@ -48,13 +25,31 @@ VIRTUALENV_LOC=".heroku/venv"
 LEGACY_TRIGGER="lib/python2.7"
 PROFILE_PATH="$BUILD_DIR/.profile.d/python.sh"
 
-# Python version. This will be used in the future to specify custom Pythons.
-DEFAULT_PYTHON_VERSION="python-2.7.3"
+DEFAULT_PYTHON_VERSION="python-2.7.8"
 PYTHON_EXE="/app/.heroku/python/bin/python"
+PIP_VERSION="1.5.6"
+SETUPTOOLS_VERSION="3.6"
+
+# Setup bpwatch
+export PATH=$PATH:$ROOT_DIR/vendor/bpwatch
+LOGPLEX_KEY="t.b90d9d29-5388-4908-9737-b4576af1d4ce"
+export BPWATCH_STORE_PATH=$CACHE_DIR/bpwatch.json
+BUILDPACK_VERSION=v28
+
+# Support Anvil Build_IDs
+[ ! "$SLUG_ID" ] && SLUG_ID="defaultslug"
+[ ! "$REQUEST_ID" ] && REQUEST_ID=$SLUG_ID
 
 # Sanitizing environment variables.
 unset GIT_DIR PYTHONHOME PYTHONPATH LD_LIBRARY_PATH LIBRARY_PATH
 
+bpwatch init $LOGPLEX_KEY
+bpwatch build python $BUILDPACK_VERSION $REQUEST_ID
+TMP_APP_DIR=$CACHE_DIR/tmp_app_dir
+
+bpwatch start compile
+
+
 # We'll need to send these statics to other scripts we `source`.
 export BUILD_DIR CACHE_DIR BIN_DIR PROFILE_PATH
 
@@ -66,28 +61,41 @@ APP_DIR='/app'
 TMP_APP_DIR=$CACHE_DIR/tmp_app_dir
 
 # Copy Anvil app dir to temporary storage...
-mkdir -p $TMP_APP_DIR
-deep-mv $APP_DIR $TMP_APP_DIR
+bpwatch start anvil_appdir_stage
+  if [ "$SLUG_ID" ]; then
+    mkdir -p $TMP_APP_DIR
+    deep-mv $APP_DIR $TMP_APP_DIR
+  else
+    deep-rm $APP_DIR
+  fi
+bpwatch stop anvil_appdir_stage
 
 # Copy Application code in.
-deep-mv $BUILD_DIR $APP_DIR
+bpwatch start appdir_stage
+  deep-mv $BUILD_DIR $APP_DIR
+bpwatch stop appdir_stage
 
 # Set new context.
 ORIG_BUILD_DIR=$BUILD_DIR
 BUILD_DIR=$APP_DIR
 
 # Prepend proper path buildpack use.
-export PATH=$BUILD_DIR/.heroku/python/bin:$PATH
+export PATH=$BUILD_DIR/.heroku/python/bin:$BUILD_DIR/.heroku/vendor/bin:$PATH
 export PYTHONUNBUFFERED=1
-
-# ## Build Time
-#
+export LANG=en_US.UTF-8
+export C_INCLUDE_PATH=/app/.heroku/vendor/include:$BUILD_DIR/.heroku/vendor/include:/app/.heroku/python/include
+export CPLUS_INCLUDE_PATH=/app/.heroku/vendor/include:$BUILD_DIR/.heroku/vendor/include:/app/.heroku/python/include
+export LIBRARY_PATH=/app/.heroku/vendor/lib:$BUILD_DIR/.heroku/vendor/lib:/app/.heroku/python/lib
+export LD_LIBRARY_PATH=/app/.heroku/vendor/lib:$BUILD_DIR/.heroku/vendor/lib:/app/.heroku/python/lib
+export PKG_CONFIG_PATH=/app/.heroku/vendor/lib/pkg-config:$BUILD_DIR/.heroku/vendor/lib/pkg-config:/app/.heroku/python/lib/pkg-config
 
 # Switch to the repo's context.
 cd $BUILD_DIR
 
 # Experimental pre_compile hook.
-source $BIN_DIR/steps/hooks/pre_compile
+bpwatch start pre_compile
+  source $BIN_DIR/steps/hooks/pre_compile
+bpwatch stop pre_compile
 
 # If no requirements given, assume `setup.py develop`.
 if [ ! -f requirements.txt ]; then
@@ -95,9 +103,13 @@ if [ ! -f requirements.txt ]; then
   echo "-e ." > requirements.txt
 fi
 
+# Sticky runtimes.
+if [ -f $CACHE_DIR/.heroku/python-version ]; then
+  DEFAULT_PYTHON_VERSION=$(cat $CACHE_DIR/.heroku/python-version)
+fi
+
 # If no runtime given, assume default version.
 if [ ! -f runtime.txt ]; then
-  puts-step "No runtime.txt provided; assuming $DEFAULT_PYTHON_VERSION."
   echo $DEFAULT_PYTHON_VERSION > runtime.txt
 fi
 
@@ -105,13 +117,17 @@ fi
 mkdir -p $CACHE_DIR
 
 # Purge "old-style" virtualenvs.
-[ -d $CACHE_DIR/$LEGACY_TRIGGER ] && rm -fr $CACHE_DIR/.heroku/bin $CACHE_DIR/.heroku/lib $CACHE_DIR/.heroku/include
-[ -d $CACHE_DIR/$VIRTUALENV_LOC ] && rm -fr $CACHE_DIR/.heroku/venv $CACHE_DIR/.heroku/src
+bpwatch start clear_old_venvs
+  [ -d $CACHE_DIR/$LEGACY_TRIGGER ] && rm -fr $CACHE_DIR/.heroku/bin $CACHE_DIR/.heroku/lib $CACHE_DIR/.heroku/include
+  [ -d $CACHE_DIR/$VIRTUALENV_LOC ] && rm -fr $CACHE_DIR/.heroku/venv $CACHE_DIR/.heroku/src
+bpwatch stop clear_old_venvs
 
 # Restore old artifacts from the cache.
-for dir in $CACHED_DIRS; do
-  cp -R $CACHE_DIR/$dir . &> /dev/null || true
-done
+bpwatch start restore_cache
+  for dir in $CACHED_DIRS; do
+    cp -R $CACHE_DIR/$dir . &> /dev/null || true
+  done
+bpwatch stop restore_cache
 
 set +e
 # Create set-aside `.heroku` folder.
@@ -126,8 +142,10 @@ PYTHON_VERSION=$(cat runtime.txt)
 # Install Python.
 if [ -f .heroku/python-version ]; then
   if [ ! $(cat .heroku/python-version) = $PYTHON_VERSION ]; then
-    puts-step "Found $(cat .heroku/python-version), removing."
-    rm -fr .heroku/python
+    bpwatch start uninstall_python
+      puts-step "Found $(cat .heroku/python-version), removing."
+      rm -fr .heroku/python
+    bpwatch stop uninstall_python
   else
     SKIP_INSTALL=1
   fi
@@ -135,78 +153,128 @@ fi
 
 
 if [ ! "$SKIP_INSTALL" ]; then
-  puts-step "Preparing Python runtime ($PYTHON_VERSION)"
-  curl http://envy-versions.s3.amazonaws.com/$PYTHON_VERSION.tar.bz2 -s | tar jx &> /dev/null
-  if [[ $? != 0 ]] ; then
-    puts-warn "Requested runtime ($PYTHON_VERSION) was not found."
-    puts-warn "Aborting.  More info: https://devcenter.heroku.com/articles/python-support"
-    exit 1
-  fi
-  mv python .heroku/python
+  bpwatch start install_python
+    puts-step "Preparing Python runtime ($PYTHON_VERSION)"
+
+    # Prepare destination directory.
+    mkdir -p .heroku/python
+
+    curl http://lang-python.s3.amazonaws.com/runtimes/$PYTHON_VERSION.tar.gz -s | tar zxv -C .heroku/python &> /dev/null
+    if [[ $? != 0 ]] ; then
+      puts-warn "Requested runtime ($PYTHON_VERSION) was not found."
+      puts-warn "Aborting.  More info: https://devcenter.heroku.com/articles/python-support"
+      exit 1
+    fi
+
+  bpwatch stop install_python
 
   # Record for future reference.
   echo $PYTHON_VERSION > .heroku/python-version
-  WORKING_DIR=$(pwd)
-
-  # Prepare it for the real world
-  puts-step "Installing Distribute (0.6.34)"
-  cd $ROOT_DIR/vendor/distribute-0.6.34/
-  python setup.py install  &> /dev/null
-  cd $WORKING_DIR
-
-  puts-step "Installing Pip (1.2.1)"
-  cd $ROOT_DIR/vendor/pip-1.2.1/
-  python setup.py install  &> /dev/null
-  cd $WORKING_DIR
+  FRESH_PYTHON=true
 
   hash -r
 else
   puts-step "Using Python runtime ($PYTHON_VERSION)"
 fi
 
+# If Pip isn't up to date:
+if [ "$FRESH_PYTHON" ] || [[ ! $(pip --version) == *$PIP_VERSION* ]]; then
+  WORKING_DIR=$(pwd)
+
+  bpwatch start prepare_environment
+
+  bpwatch start install_setuptools
+    # Prepare it for the real world
+    puts-step "Installing Setuptools ($SETUPTOOLS_VERSION)"
+    cd $ROOT_DIR/vendor/
+    tar zxf setuptools-$SETUPTOOLS_VERSION.tar.gz
+    cd $ROOT_DIR/vendor/setuptools-$SETUPTOOLS_VERSION/
+    python setup.py install &> /dev/null
+    cd $WORKING_DIR
+  bpwatch stop install_setuptoools
+
+  bpwatch start install_pip
+    puts-step "Installing Pip ($PIP_VERSION)"
+
+    cd $ROOT_DIR/vendor/
+    tar zxf pip-$PIP_VERSION.tar.gz
+    cd $ROOT_DIR/vendor/pip-$PIP_VERSION/
+    python setup.py install &> /dev/null
+    cd $WORKING_DIR
+
+  bpwatch stop install_pip
+  bpwatch stop prepare_environment
+fi
+
 set -e
+hash -r
 
 # Pylibmc support.
 # See [`bin/steps/pylibmc`](pylibmc.html).
-source $BIN_DIR/steps/pylibmc
+bpwatch start pylibmc_install
+  source $BIN_DIR/steps/pylibmc
+bpwatch stop pylibmc_install
 
 # Install Mercurial if it appears to be required.
-if (in-req "hg+" requirements.txt) then
-  pip install --use-mirrors mercurial | cleanup | indent
+if (grep -Fiq "hg+" requirements.txt) then
+  bpwatch start mercurial_install
+    /app/.heroku/python/bin/pip install  mercurial | cleanup | indent
+  bpwatch stop mercurial_install
 fi
 
 # Install dependencies with Pip.
-puts-step "Installing dependencies using Pip (1.2.1)"
-pip install --use-mirrors -r requirements.txt --exists-action=w --src=./.heroku/src | cleanup | indent
+puts-step "Installing dependencies using Pip ($PIP_VERSION)"
+
+
+[ ! "$FRESH_PYTHON" ] && bpwatch start pip_install
+[ "$FRESH_PYTHON" ] && bpwatch start pip_install_first
+
+/app/.heroku/python/bin/pip install -r requirements.txt --exists-action=w --src=./.heroku/src --allow-all-external  | cleanup | indent
+
+[ ! "$FRESH_PYTHON" ] && bpwatch stop pip_install
+[ "$FRESH_PYTHON" ] && bpwatch stop pip_install_first
 
 # Django collectstatic support.
-source $BIN_DIR/steps/collectstatic
+bpwatch start collectstatic
+  sub-env $BIN_DIR/steps/collectstatic
+bpwatch stop collectstatic
 
 # ### Finalize
 #
 
-# Store new artifacts in cache.
-for dir in $CACHED_DIRS; do
-  rm -rf $CACHE_DIR/$dir
-  cp -R $dir $CACHE_DIR/
-done
-
 # Set context environment variables.
 set-env PATH '$HOME/.heroku/python/bin:$PATH'
-# set-env PYTHONHOME /app/.heroku/python/
 set-env PYTHONUNBUFFERED true
-set-default-env LIBRARY_PATH /app/.heroku/vendor/lib
-set-default-env LD_LIBRARY_PATH /app/.heroku/vendor/lib
+set-env PYTHONHOME /app/.heroku/python
+set-env LIBRARY_PATH /app/.heroku/vendor/lib:/app/.heroku/python/lib
+set-env LD_LIBRARY_PATH '/app/.heroku/vendor/lib:/app/.heroku/python/lib:$LD_LIBRARY_PATH'
 set-default-env LANG en_US.UTF-8
 set-default-env PYTHONHASHSEED random
 set-default-env PYTHONPATH /app/
-un-set-env PYTHONHOME
 
 
 # Experimental post_compile hook.
-source $BIN_DIR/steps/hooks/post_compile
+bpwatch start post_compile
+  source $BIN_DIR/steps/hooks/post_compile
+bpwatch stop post_compile
+
+# Store new artifacts in cache.
+bpwatch start dump_cache
+  for dir in $CACHED_DIRS; do
+    rm -rf $CACHE_DIR/$dir
+    cp -R $dir $CACHE_DIR/
+  done
+bpwatch stop dump_cache
 
 # ### Fin.
+bpwatch start appdir_commit
+  deep-mv $BUILD_DIR $ORIG_BUILD_DIR
+bpwatch stop appdir_commit
 
-deep-mv $BUILD_DIR $ORIG_BUILD_DIR
-deep-mv $TMP_APP_DIR $APP_DIR
+bpwatch start anvil_appdir_commit
+  if [ "$SLUG_ID" ]; then
+    deep-mv $TMP_APP_DIR $APP_DIR
+  fi
+
+bpwatch stop anvil_appdir_commit
+bpwatch stop compile

bin/release

@@ -18,6 +18,6 @@ if [[ $MANAGE_FILE ]]; then
 cat <<EOF
 
 addons:
-  shared-database:5mb
+  heroku-postgresql:hobby-dev
 EOF
-fi
+fi

bin/steps/collectstatic

@@ -1,34 +1,32 @@
 #!/usr/bin/env bash
 
-# Syntax sugar.
-indent() {
-  RE="s/^/       /"
-  [ $(uname) == "Darwin" ] && sed -l "$RE" || sed -u "$RE"
-}
+source $BIN_DIR/utils
 
 MANAGE_FILE=$(find . -maxdepth 3 -type f -name 'manage.py' | head -1)
-MANAGE_FILE=${MANAGE_FILE:2}
+MANAGE_FILE=${MANAGE_FILE:-fakepath}
 
-if [ -f .heroku/collectstatic_disabled ]; then
-  DISABLE_COLLECTSTATIC=1
-fi
+[ -f .heroku/collectstatic_disabled ] && DISABLE_COLLECTSTATIC=1
 
-if [ ! "$DISABLE_COLLECTSTATIC" ]; then
+if [ ! "$DISABLE_COLLECTSTATIC" ] && [ -f "$MANAGE_FILE" ]; then
     set +e
 
+    echo "-----> Preparing static assets"
     # Check if collectstatic is configured properly.
     python $MANAGE_FILE collectstatic --dry-run --noinput &> /dev/null && RUN_COLLECTSTATIC=true
 
     # Compile assets if collectstatic appears to be kosher.
     if [ "$RUN_COLLECTSTATIC" ]; then
 
-        echo "-----> Collecting static files"
+        echo "       Running collectstatic..."
         python $MANAGE_FILE collectstatic --noinput  2>&1 | sed '/^Copying/d;/^$/d;/^ /d' | indent
 
         [ $? -ne 0 ] && {
-            echo " !     Error running manage.py collectstatic. More info:"
+            echo " !     Error running 'manage.py collectstatic'. More info:"
             echo "       http://devcenter.heroku.com/articles/django-assets"
         }
+    else
+        echo "       Collectstatic configuration error. To debug, run:"
+        echo "       $ heroku run python $MANAGE_FILE collectstatic --noinput"
     fi
 
     echo

bin/steps/hooks/post_compile

@@ -3,5 +3,5 @@
 if [ -f bin/post_compile ]; then
     echo "-----> Running post-compile hook"
     chmod +x bin/post_compile
-    bin/post_compile
+    sub-env bin/post_compile
 fi

bin/steps/hooks/pre_compile

@@ -3,5 +3,5 @@
 if [ -f bin/pre_compile ]; then
     echo "-----> Running pre-compile hook"
     chmod +x bin/pre_compile
-    bin/pre_compile
+    sub-env bin/pre_compile
 fi

bin/steps/pylibmc

@@ -16,7 +16,7 @@ VENDORED_MEMCACHED="http://cl.ly/0a191R3K160t1w1P0N25/vendor-libmemcached.tar.gz
 source $BIN_DIR/utils
 
 # If pylibmc exists within requirements, use vendored libmemcached.
-if (in-req "pylibmc" requirements.txt) then
+if (grep -Eiq "\s*pylibmc" requirements.txt) then
   echo "-----> Noticed pylibmc. Bootstrapping libmemcached."
   cd .heroku
 

bin/test

@@ -2,7 +2,7 @@
 
 #
 # Create a Heroku app with the following buildpack:
-# https://github.com/ddollar/buildpack-tet
+# https://github.com/ddollar/buildpack-test
 #
 # Push this Python buildpack to that Heroku app to
 # run the tests.
@@ -20,6 +20,18 @@ testDetectWithEmptyReqs() {
   assertCapturedSuccess
 }
 
+testDetectDjango16() {
+  detect "django-1.6-skeleton"
+  assertCapturedEquals "Python"
+  assertCapturedSuccess
+}
+
+testDetectDjango15() {
+  detect "django-1.5-skeleton"
+  assertCapturedEquals "Python"
+  assertCapturedSuccess
+}
+
 testDetectDjango14() {
   detect "django-1.4-skeleton"
   assertCapturedEquals "Python"
@@ -56,6 +68,23 @@ testDetectNotPython() {
   assertEquals "1" "${RETURN}"
 }
 
+testDetectSimpleRuntimePypy2() {
+  detect "simple-runtime-pypy2"
+  assertCapturedEquals "Python"
+  assertCapturedSuccess
+}
+
+testDetectSimpleRuntimePython2() {
+  detect "simple-runtime-python2"
+  assertCapturedEquals "Python"
+  assertCapturedSuccess
+}
+
+testDetectSimpleRuntimePython3() {
+  detect "simple-runtime"  # should probably be renamed simple-runtime-python3
+  assertCapturedEquals "Python"
+  assertCapturedSuccess
+}
 
 ## utils ########################################
 

bin/typescript

@@ -1,3 +0,0 @@
-Script started on Wed Dec 19 22:40:46 2012
-%                                                                                                                                                                                                                                                                                                                                                                         
- 

bin/utils

@@ -1,76 +1,93 @@
 shopt -s extglob
 
-[ $(uname) == "Darwin" ] && SED_FLAG='-l' || SED_FLAG='-u'
+if [ $(uname) == Darwin ]; then
+    sed() { command sed -l "$@"; }
+else
+    sed() { command sed -u "$@"; }
+fi
 
 # Syntax sugar.
 indent() {
-  RE="s/^/       /"
-  sed $SED_FLAG "$RE"
+  sed "s/^/       /"
 }
 
 # Clean up pip output
 cleanup() {
-  sed $SED_FLAG -e 's/\.\.\.\+/.../g' | sed $SED_FLAG '/already satisfied/Id' | sed $SED_FLAG -e '/Overwriting/Id' |  sed $SED_FLAG -e '/python executable/Id' | sed $SED_FLAG -e '/no previously-included files/Id'
+  sed -e 's/\.\.\.\+/.../g' | sed -e '/already satisfied/Id' | sed -e '/Overwriting/Id' | sed -e '/python executable/Id' | sed -e '/no previously-included files/Id'
 }
 
 # Buildpack Steps.
-function puts-step (){
+puts-step() {
   echo "-----> $@"
 }
 
 # Buildpack Warnings.
-function puts-warn (){
+puts-warn() {
   echo " !     $@"
 }
 
 # Usage: $ set-env key value
-function set-env (){
+set-env() {
   echo "export $1=$2" >> $PROFILE_PATH
 }
 
 # Usage: $ set-default-env key value
-function set-default-env (){
+set-default-env() {
   echo "export $1=\${$1:-$2}" >> $PROFILE_PATH
 }
 
 # Usage: $ set-default-env key value
-function un-set-env (){
+un-set-env() {
   echo "unset $1" >> $PROFILE_PATH
 }
 
 # Does some serious copying.
-function deep-cp (){
-  find -H $1 -maxdepth 1 -name '.*' -a \( -type d -o -type f -o -type l \) -exec cp -a '{}' $2 \;
-  cp -r $1/!(tmp) $2
-  # echo copying $1 to $2
+deep-cp() {
+  declare source="$1" target="$2"
+
+  mkdir -p "$target"
+
+  # cp doesn't like being called without source params,
+  # so make sure they expand to something first.
+  # subshell to avoid surprising caller with shopts.
+  (
+    shopt -s nullglob dotglob
+    set -- "$source"/!(tmp|.|..)
+    [[ $# == 0 ]] || cp -a "$@" "$target"
+  )
 }
 
 # Does some serious moving.
-function deep-mv (){
-  deep-cp $1 $2
-
-  rm -fr $1/!(tmp)
-  find -H $1 -maxdepth 1 -name '.*' -a \( -type d -o -type f -o -type l \) -exec rm -fr '{}' \;
+deep-mv() {
+  deep-cp "$1" "$2"
+  deep-rm "$1"
 }
 
-# Recursively finds requirements.txt files
-function list-req (){
-  echo $@
-  for req in $(grep -Fie "-r " $@ | sed 's/-r //g')
-    do
-      path="$(dirname $@)/$req"
-      list-req $path
-    done
+# Does some serious deleting.
+deep-rm() {
+  # subshell to avoid surprising caller with shopts.
+  (
+    shopt -s dotglob
+    rm -rf "$1"/!(tmp|.|..)
+  )
 }
 
-# Find pattern in requirements files recursively
-# Usage: $ in-req pattern file
-function in-req (){
-  for file in $(list-req $2)
-    do
-      if (grep -Fiqe "$1" "$file") then
-        return 0
-      fi
-    done
-  return 1
+
+sub-env() {
+
+  WHITELIST=${2:-''}
+  BLACKLIST=${3:-'^(GIT_DIR|PYTHONHOME|LD_LIBRARY_PATH|LIBRARY_PATH|PATH)$'}
+
+  (
+    if [ -d "$ENV_DIR" ]; then
+      for e in $(ls $ENV_DIR); do
+        echo "$e" | grep -E "$WHITELIST" | grep -qvE "$BLACKLIST" &&
+        export "$e=$(cat $ENV_DIR/$e)"
+        :
+      done
+    fi
+
+    $1
+
+  )
 }

builds/README.md

@@ -0,0 +1,31 @@
+# Python Buildpack Binaries
+
+
+To get started with it, create an app on Heroku inside a clone of this repository, and set your S3 config vars:
+
+    $ heroku create --buildpack https://github.com/heroku/heroku-buildpack-python#not-heroku
+    $ heroku config:set WORKSPACE_DIR=builds
+    $ heroku config:set AWS_ACCESS_KEY_ID=<your_aws_key>
+    $ heroku config:set AWS_SECRET_ACCESS_KEY=<your_aws_secret>
+    $ heroku config:set S3_BUCKET=<your_s3_bucket_name>
+
+
+Then, shell into an instance and run a build by giving the name of the formula inside `builds`:
+
+    $ heroku run bash
+    Running `bash` attached to terminal... up, run.6880
+    ~ $ bob build runtimes/python-2.7.6
+
+    Fetching dependencies... found 2:
+      - libraries/sqlite
+
+    Building formula runtimes/python-2.7.6:
+        === Building Python 2.7.6
+        Fetching Python v2.7.6 source...
+        Compiling...
+
+If this works, run `bob deploy` instead of `bob build` to have the result uploaded to S3 for you.
+
+To speed things up drastically, it'll usually be a good idea to `heroku run bash --size PX` instead.
+
+Enjoy :)

builds/libraries/sqlite

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+
+OUT_PREFIX=$1
+
+echo "Building SQLite..."
+
+
+SOURCE_TARBALL='http://www.sqlite.org/sqlite-autoconf-3070900.tar.gz'
+
+curl $SOURCE_TARBALL | tar xz
+# jx
+mv sqlite-autoconf-3070900 sqlite
+
+cd sqlite
+./configure --prefix=$OUT_PREFIX
+make
+make install
+
+# Cleanup
+cd ..
+rm -fr sqlite

builds/runtimes/pypy-1.7

@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building PyPy..."
+SOURCE_TARBALL='https://bitbucket.org/pypy/pypy/downloads/pypy-1.7-linux64.tar.bz2'
+curl -L $SOURCE_TARBALL | tar jx
+cp -R pypy-1.7/* $OUT_PREFIX
+
+ln $OUT_PREFIX/bin/pypy $OUT_PREFIX/bin/python

builds/runtimes/pypy-1.8

@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building PyPy..."
+SOURCE_TARBALL='https://bitbucket.org/pypy/pypy/downloads/pypy-1.8-linux64.tar.bz2'
+curl -L $SOURCE_TARBALL | tar jx
+cp -R pypy-1.8/* $OUT_PREFIX
+
+ln $OUT_PREFIX/bin/pypy $OUT_PREFIX/bin/python

builds/runtimes/pypy-1.9

@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building PyPy..."
+SOURCE_TARBALL='https://bitbucket.org/pypy/pypy/downloads/pypy-1.9-linux64.tar.bz2'
+curl -L $SOURCE_TARBALL | tar jx
+cp -R pypy-1.9/* $OUT_PREFIX
+
+ln $OUT_PREFIX/bin/pypy $OUT_PREFIX/bin/python

builds/runtimes/python-2.4.4

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.4 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.4.4/Python-2.4.4.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.4.4 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.4.5

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.4 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.4.5/Python-2.4.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.4.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.4.6

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.4 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.4.6/Python-2.4.6.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.4.6 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.5.0

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.5 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.5/Python-2.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.5.1

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.5 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.5.1/Python-2.5.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.5.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.5.2

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.5 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.5.2/Python-2.5.2.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.5.2 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.5.3

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.5 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.5.3/Python-2.5.3.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.5.3 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.5.4

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.5 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.5.4/Python-2.5.4.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.5.4 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.5.5

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.5.5/Python-2.5.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.5.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.5.6

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.5 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.5.6/Python-2.5.6.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.5.6 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.6.0

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://www.python.org/ftp/python/2.6/Python-2.6.tar.bz2'
+curl -L $SOURCE_TARBALL | tar jx
+mv Python-2.6 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.1

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.1/Python-2.6.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.2

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.2/Python-2.6.2.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.2 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.3

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.3/Python-2.6.3.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.3 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.4

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.4/Python-2.6.4.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.4 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.5

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.5/Python-2.6.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.6

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.6/Python-2.6.6.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.6 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.7

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.7/Python-2.6.7.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.7 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.8

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.8/Python-2.6.8.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.8 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.6.9

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+# Protect 2.6 builds from parent Python (causes segfault during build).
+unset LANG PYTHONHOME PYTHONPATH
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.6.9/Python-2.6.9.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.6.9 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.0

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7/Python-2.7.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.1

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.1/Python-2.7.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.2

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.2/Python-2.7.2.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.2 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.3

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.3/Python-2.7.3.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.3 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.4

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.4/Python-2.7.4.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.4 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.5

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.5/Python-2.7.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.6

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.6/Python-2.7.6.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.6 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.7

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.7/Python-2.7.7.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.7 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-2.7.7-shared

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.7/Python-2.7.7.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.7 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.8

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.8/Python-2.7.8.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.8 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install

builds/runtimes/python-2.7.8-shared

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/2.7.8/Python-2.7.8.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-2.7.8 src
+cd src
+
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/runtimes/python-3.1.0

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.1/Python-3.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.1.1

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.1.1/Python-3.1.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.1.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX  --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.1.2

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.1.2/Python-3.1.2.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.1.2 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.1.3

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.1.3/Python-3.1.3.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.1.3 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.1.4

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.1.4/Python-3.1.4.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.1.4 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.1.5

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.1.5/Python-3.1.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.1.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.2.0

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.2/Python-3.2.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.2 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.2.1

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.2.1/Python-3.2.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.2.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.2.2

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.2.2/Python-3.2.2.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.2.2 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.2.3

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.2.3/Python-3.2.3.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.2.3 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.2.4

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.2.4/Python-3.2.4.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.2.4 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.2.5

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.2.5/Python-3.2.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.2.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.3.0

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.3.0/Python-3.3.0.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.3.0 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.3.1

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.3.1/Python-3.3.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.3.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.3.2

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.3.2/Python-3.3.2.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.3.2 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.3.3

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.3.3/Python-3.3.3.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.3.3 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.3.4

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.3.4/Python-3.3.4.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.3.4 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.4.0

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.4.0/Python-3.4.0.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.4.0 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --with-ensurepip=no --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

builds/runtimes/python-3.4.1

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.4.1/Python-3.4.1.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.4.1 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --with-ensurepip=no --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python
+

requirements.txt

@@ -1 +1 @@
-requests
+bob-builder==0.0.5

test/distutils/envoy.py

@@ -168,7 +168,7 @@ def run(command, data=None, timeout=None, env=None):
     history = []
     for c in command:
 
-        if len(history):
+        if history:
             # due to broken pipe problems pass only first 10MB
             data = history[-1].std_out[0:10*1024]
 

test/django-1.5-skeleton/haystack/settings.py

@@ -0,0 +1,156 @@
+# Django settings for haystack project.
+
+DEBUG = True
+TEMPLATE_DEBUG = DEBUG
+
+ADMINS = (
+    # ('Your Name', 'your_email@example.com'),
+)
+
+MANAGERS = ADMINS
+
+DATABASES = {
+    'default': {
+        'ENGINE': 'django.db.backends.', # Add 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'.
+        'NAME': '',                      # Or path to database file if using sqlite3.
+        # The following settings are not used with sqlite3:
+        'USER': '',
+        'PASSWORD': '',
+        'HOST': '',                      # Empty for localhost through domain sockets or '127.0.0.1' for localhost through TCP.
+        'PORT': '',                      # Set to empty string for default.
+    }
+}
+
+# Hosts/domain names that are valid for this site; required if DEBUG is False
+# See https://docs.djangoproject.com/en/1.5/ref/settings/#allowed-hosts
+ALLOWED_HOSTS = []
+
+# Local time zone for this installation. Choices can be found here:
+# http://en.wikipedia.org/wiki/List_of_tz_zones_by_name
+# although not all choices may be available on all operating systems.
+# In a Windows environment this must be set to your system time zone.
+TIME_ZONE = 'America/Chicago'
+
+# Language code for this installation. All choices can be found here:
+# http://www.i18nguy.com/unicode/language-identifiers.html
+LANGUAGE_CODE = 'en-us'
+
+SITE_ID = 1
+
+# If you set this to False, Django will make some optimizations so as not
+# to load the internationalization machinery.
+USE_I18N = True
+
+# If you set this to False, Django will not format dates, numbers and
+# calendars according to the current locale.
+USE_L10N = True
+
+# If you set this to False, Django will not use timezone-aware datetimes.
+USE_TZ = True
+
+# Absolute filesystem path to the directory that will hold user-uploaded files.
+# Example: "/var/www/example.com/media/"
+MEDIA_ROOT = ''
+
+# URL that handles the media served from MEDIA_ROOT. Make sure to use a
+# trailing slash.
+# Examples: "http://example.com/media/", "http://media.example.com/"
+MEDIA_URL = ''
+
+# Absolute path to the directory static files should be collected to.
+# Don't put anything in this directory yourself; store your static files
+# in apps' "static/" subdirectories and in STATICFILES_DIRS.
+# Example: "/var/www/example.com/static/"
+STATIC_ROOT = ''
+
+# URL prefix for static files.
+# Example: "http://example.com/static/", "http://static.example.com/"
+STATIC_URL = '/static/'
+
+# Additional locations of static files
+STATICFILES_DIRS = (
+    # Put strings here, like "/home/html/static" or "C:/www/django/static".
+    # Always use forward slashes, even on Windows.
+    # Don't forget to use absolute paths, not relative paths.
+)
+
+# List of finder classes that know how to find static files in
+# various locations.
+STATICFILES_FINDERS = (
+    'django.contrib.staticfiles.finders.FileSystemFinder',
+    'django.contrib.staticfiles.finders.AppDirectoriesFinder',
+#    'django.contrib.staticfiles.finders.DefaultStorageFinder',
+)
+
+# Make this unique, and don't share it with anybody.
+SECRET_KEY = '@w-1$9#jh05!qvbh#1k)c4=w9llcq116f$5(4&s_c)n4@%n=pc'
+
+# List of callables that know how to import templates from various sources.
+TEMPLATE_LOADERS = (
+    'django.template.loaders.filesystem.Loader',
+    'django.template.loaders.app_directories.Loader',
+#     'django.template.loaders.eggs.Loader',
+)
+
+MIDDLEWARE_CLASSES = (
+    'django.middleware.common.CommonMiddleware',
+    'django.contrib.sessions.middleware.SessionMiddleware',
+    'django.middleware.csrf.CsrfViewMiddleware',
+    'django.contrib.auth.middleware.AuthenticationMiddleware',
+    'django.contrib.messages.middleware.MessageMiddleware',
+    # Uncomment the next line for simple clickjacking protection:
+    # 'django.middleware.clickjacking.XFrameOptionsMiddleware',
+)
+
+ROOT_URLCONF = 'haystack.urls'
+
+# Python dotted path to the WSGI application used by Django's runserver.
+WSGI_APPLICATION = 'haystack.wsgi.application'
+
+TEMPLATE_DIRS = (
+    # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates".
+    # Always use forward slashes, even on Windows.
+    # Don't forget to use absolute paths, not relative paths.
+)
+
+INSTALLED_APPS = (
+    'django.contrib.auth',
+    'django.contrib.contenttypes',
+    'django.contrib.sessions',
+    'django.contrib.sites',
+    'django.contrib.messages',
+    'django.contrib.staticfiles',
+    # Uncomment the next line to enable the admin:
+    # 'django.contrib.admin',
+    # Uncomment the next line to enable admin documentation:
+    # 'django.contrib.admindocs',
+)
+
+# A sample logging configuration. The only tangible logging
+# performed by this configuration is to send an email to
+# the site admins on every HTTP 500 error when DEBUG=False.
+# See http://docs.djangoproject.com/en/dev/topics/logging for
+# more details on how to customize your logging configuration.
+LOGGING = {
+    'version': 1,
+    'disable_existing_loggers': False,
+    'filters': {
+        'require_debug_false': {
+            '()': 'django.utils.log.RequireDebugFalse'
+        }
+    },
+    'handlers': {
+        'mail_admins': {
+            'level': 'ERROR',
+            'filters': ['require_debug_false'],
+            'class': 'django.utils.log.AdminEmailHandler'
+        }
+    },
+    'loggers': {
+        'django.request': {
+            'handlers': ['mail_admins'],
+            'level': 'ERROR',
+            'propagate': True,
+        },
+    }
+}

test/django-1.5-skeleton/haystack/urls.py

@@ -0,0 +1,17 @@
+from django.conf.urls import patterns, include, url
+
+# Uncomment the next two lines to enable the admin:
+# from django.contrib import admin
+# admin.autodiscover()
+
+urlpatterns = patterns('',
+    # Examples:
+    # url(r'^$', 'haystack.views.home', name='home'),
+    # url(r'^haystack/', include('haystack.foo.urls')),
+
+    # Uncomment the admin/doc line below to enable admin documentation:
+    # url(r'^admin/doc/', include('django.contrib.admindocs.urls')),
+
+    # Uncomment the next line to enable the admin:
+    # url(r'^admin/', include(admin.site.urls)),
+)

test/django-1.5-skeleton/haystack/wsgi.py

@@ -0,0 +1,32 @@
+"""
+WSGI config for haystack project.
+
+This module contains the WSGI application used by Django's development server
+and any production WSGI deployments. It should expose a module-level variable
+named ``application``. Django's ``runserver`` and ``runfcgi`` commands discover
+this application via the ``WSGI_APPLICATION`` setting.
+
+Usually you will have the standard Django WSGI application here, but it also
+might make sense to replace the whole Django WSGI application with a custom one
+that later delegates to the Django one. For example, you could introduce WSGI
+middleware here, or combine a Django application with an application of another
+framework.
+
+"""
+import os
+
+# We defer to a DJANGO_SETTINGS_MODULE already in the environment. This breaks
+# if running multiple sites in the same mod_wsgi process. To fix this, use
+# mod_wsgi daemon mode with each site in its own daemon process, or use
+# os.environ["DJANGO_SETTINGS_MODULE"] = "haystack.settings"
+os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
+
+# This application object is used by any WSGI server configured to use this
+# file. This includes Django's development server, if the WSGI_APPLICATION
+# setting points here.
+from django.core.wsgi import get_wsgi_application
+application = get_wsgi_application()
+
+# Apply WSGI middleware here.
+# from helloworld.wsgi import HelloWorldApplication
+# application = HelloWorldApplication(application)

test/django-1.5-skeleton/manage.py

@@ -0,0 +1,10 @@
+#!/usr/bin/env python
+import os
+import sys
+
+if __name__ == "__main__":
+    os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
+
+    from django.core.management import execute_from_command_line
+
+    execute_from_command_line(sys.argv)

test/django-1.5-skeleton/requirements.txt

@@ -0,0 +1 @@
+django==1.5

test/django-1.6-skeleton/haystack/__init__.py

@@ -0,0 +1 @@
+ 

test/django-1.6-skeleton/haystack/settings.py

@@ -0,0 +1,156 @@
+# Django settings for haystack project.
+
+DEBUG = True
+TEMPLATE_DEBUG = DEBUG
+
+ADMINS = (
+    # ('Your Name', 'your_email@example.com'),
+)
+
+MANAGERS = ADMINS
+
+DATABASES = {
+    'default': {
+        'ENGINE': 'django.db.backends.', # Add 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'.
+        'NAME': '', # Or path to database file if using sqlite3.
+        # The following settings are not used with sqlite3:
+        'USER': '',
+        'PASSWORD': '',
+        'HOST': '', # Empty for localhost through domain sockets or '127.0.0.1' for localhost through TCP.
+        'PORT': '', # Set to empty string for default.
+    }
+}
+
+# Hosts/domain names that are valid for this site; required if DEBUG is False
+# See https://docs.djangoproject.com/en/1.5/ref/settings/#allowed-hosts
+ALLOWED_HOSTS = []
+
+# Local time zone for this installation. Choices can be found here:
+# http://en.wikipedia.org/wiki/List_of_tz_zones_by_name
+# although not all choices may be available on all operating systems.
+# In a Windows environment this must be set to your system time zone.
+TIME_ZONE = 'America/Chicago'
+
+# Language code for this installation. All choices can be found here:
+# http://www.i18nguy.com/unicode/language-identifiers.html
+LANGUAGE_CODE = 'en-us'
+
+SITE_ID = 1
+
+# If you set this to False, Django will make some optimizations so as not
+# to load the internationalization machinery.
+USE_I18N = True
+
+# If you set this to False, Django will not format dates, numbers and
+# calendars according to the current locale.
+USE_L10N = True
+
+# If you set this to False, Django will not use timezone-aware datetimes.
+USE_TZ = True
+
+# Absolute filesystem path to the directory that will hold user-uploaded files.
+# Example: "/var/www/example.com/media/"
+MEDIA_ROOT = ''
+
+# URL that handles the media served from MEDIA_ROOT. Make sure to use a
+# trailing slash.
+# Examples: "http://example.com/media/", "http://media.example.com/"
+MEDIA_URL = ''
+
+# Absolute path to the directory static files should be collected to.
+# Don't put anything in this directory yourself; store your static files
+# in apps' "static/" subdirectories and in STATICFILES_DIRS.
+# Example: "/var/www/example.com/static/"
+STATIC_ROOT = ''
+
+# URL prefix for static files.
+# Example: "http://example.com/static/", "http://static.example.com/"
+STATIC_URL = '/static/'
+
+# Additional locations of static files
+STATICFILES_DIRS = (
+    # Put strings here, like "/home/html/static" or "C:/www/django/static".
+    # Always use forward slashes, even on Windows.
+    # Don't forget to use absolute paths, not relative paths.
+)
+
+# List of finder classes that know how to find static files in
+# various locations.
+STATICFILES_FINDERS = (
+    'django.contrib.staticfiles.finders.FileSystemFinder',
+    'django.contrib.staticfiles.finders.AppDirectoriesFinder',
+# 'django.contrib.staticfiles.finders.DefaultStorageFinder',
+)
+
+# Make this unique, and don't share it with anybody.
+SECRET_KEY = '@w-1$9#jh05!qvbh#1k)c4=w9llcq116f$5(4&s_c)n4@%n=pc'
+
+# List of callables that know how to import templates from various sources.
+TEMPLATE_LOADERS = (
+    'django.template.loaders.filesystem.Loader',
+    'django.template.loaders.app_directories.Loader',
+# 'django.template.loaders.eggs.Loader',
+)
+
+MIDDLEWARE_CLASSES = (
+    'django.middleware.common.CommonMiddleware',
+    'django.contrib.sessions.middleware.SessionMiddleware',
+    'django.middleware.csrf.CsrfViewMiddleware',
+    'django.contrib.auth.middleware.AuthenticationMiddleware',
+    'django.contrib.messages.middleware.MessageMiddleware',
+    # Uncomment the next line for simple clickjacking protection:
+    # 'django.middleware.clickjacking.XFrameOptionsMiddleware',
+)
+
+ROOT_URLCONF = 'haystack.urls'
+
+# Python dotted path to the WSGI application used by Django's runserver.
+WSGI_APPLICATION = 'haystack.wsgi.application'
+
+TEMPLATE_DIRS = (
+    # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates".
+    # Always use forward slashes, even on Windows.
+    # Don't forget to use absolute paths, not relative paths.
+)
+
+INSTALLED_APPS = (
+    'django.contrib.auth',
+    'django.contrib.contenttypes',
+    'django.contrib.sessions',
+    'django.contrib.sites',
+    'django.contrib.messages',
+    'django.contrib.staticfiles',
+    # Uncomment the next line to enable the admin:
+    # 'django.contrib.admin',
+    # Uncomment the next line to enable admin documentation:
+    # 'django.contrib.admindocs',
+)
+
+# A sample logging configuration. The only tangible logging
+# performed by this configuration is to send an email to
+# the site admins on every HTTP 500 error when DEBUG=False.
+# See http://docs.djangoproject.com/en/dev/topics/logging for
+# more details on how to customize your logging configuration.
+LOGGING = {
+    'version': 1,
+    'disable_existing_loggers': False,
+    'filters': {
+        'require_debug_false': {
+            '()': 'django.utils.log.RequireDebugFalse'
+        }
+    },
+    'handlers': {
+        'mail_admins': {
+            'level': 'ERROR',
+            'filters': ['require_debug_false'],
+            'class': 'django.utils.log.AdminEmailHandler'
+        }
+    },
+    'loggers': {
+        'django.request': {
+            'handlers': ['mail_admins'],
+            'level': 'ERROR',
+            'propagate': True,
+        },
+    }
+}

test/django-1.6-skeleton/haystack/urls.py

@@ -0,0 +1,17 @@
+from django.conf.urls import patterns, include, url
+
+# Uncomment the next two lines to enable the admin:
+# from django.contrib import admin
+# admin.autodiscover()
+
+urlpatterns = patterns('',
+    # Examples:
+    # url(r'^$', 'haystack.views.home', name='home'),
+    # url(r'^haystack/', include('haystack.foo.urls')),
+
+    # Uncomment the admin/doc line below to enable admin documentation:
+    # url(r'^admin/doc/', include('django.contrib.admindocs.urls')),
+
+    # Uncomment the next line to enable the admin:
+    # url(r'^admin/', include(admin.site.urls)),
+)

test/django-1.6-skeleton/haystack/wsgi.py

@@ -0,0 +1,32 @@
+"""
+WSGI config for haystack project.
+
+This module contains the WSGI application used by Django's development server
+and any production WSGI deployments. It should expose a module-level variable
+named ``application``. Django's ``runserver`` and ``runfcgi`` commands discover
+this application via the ``WSGI_APPLICATION`` setting.
+
+Usually you will have the standard Django WSGI application here, but it also
+might make sense to replace the whole Django WSGI application with a custom one
+that later delegates to the Django one. For example, you could introduce WSGI
+middleware here, or combine a Django application with an application of another
+framework.
+
+"""
+import os
+
+# We defer to a DJANGO_SETTINGS_MODULE already in the environment. This breaks
+# if running multiple sites in the same mod_wsgi process. To fix this, use
+# mod_wsgi daemon mode with each site in its own daemon process, or use
+# os.environ["DJANGO_SETTINGS_MODULE"] = "haystack.settings"
+os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
+
+# This application object is used by any WSGI server configured to use this
+# file. This includes Django's development server, if the WSGI_APPLICATION
+# setting points here.
+from django.core.wsgi import get_wsgi_application
+application = get_wsgi_application()
+
+# Apply WSGI middleware here.
+# from helloworld.wsgi import HelloWorldApplication
+# application = HelloWorldApplication(application)

test/django-1.6-skeleton/manage.py

@@ -0,0 +1,10 @@
+#!/usr/bin/env python
+import os
+import sys
+
+if __name__ == "__main__":
+    os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
+
+    from django.core.management import execute_from_command_line
+
+    execute_from_command_line(sys.argv)

test/django-1.6-skeleton/requirements.txt

@@ -0,0 +1 @@
+django==1.6

test/pylibmc/requirements.txt

@@ -0,0 +1,2 @@
+pylibmc
+psycopg2

test/simple-requirements/requirements.txt

@@ -1 +1,2 @@
-httpbin
+requests
+distribute==0.6.49

test/simple-runtime-pypy2/requirements.txt

@@ -0,0 +1 @@
+requests==2.2.1

test/simple-runtime-pypy2/runtime.txt

@@ -0,0 +1 @@
+pypy-2.3

test/simple-runtime-python2/requirements.txt

@@ -0,0 +1 @@
+requests==2.2.1

test/simple-runtime-python2/runtime.txt

@@ -0,0 +1 @@
+python-2.7.6

test/simple-runtime/requirements.txt

@@ -1 +1 @@
-requests==1.0.3
+requests==2.2.1

test/simple-runtime/runtime.txt

@@ -1 +1 @@
-python-2.7.3
+python-3.4.0

vendor/bpwatch/bpwatch

@@ -0,0 +1,14 @@
+#!/usr/bin/env python2
+
+
+import os
+import sys
+
+
+DEFAULT_PATH = '{0}.zip'.format(os.path.abspath(__file__))
+BPWATCH_DISTRO_PATH = os.environ.get('BPWATCH_DISTRO_PATH', DEFAULT_PATH)
+
+sys.path.insert(0, BPWATCH_DISTRO_PATH)
+
+import bp_cli
+bp_cli.main()

vendor/distribute-0.6.34/CHANGES.txt

@@ -1,487 +0,0 @@
-=======
-CHANGES
-=======
-
-----------
-Unreleased
-----------
-
-+ Issue #341: 0.6.33 fails to build under python 2.4
-
-------
-0.6.33
-------
-
-* Fix 2 errors with Jython 2.5.
-* Fix 1 failure with Jython 2.5 and 2.7.
-* Disable workaround for Jython scripts on Linux systems.
-* Issue #336: `setup.py` no longer masks failure exit code when tests fail.
-* Fix issue in pkg_resources where try/except around a platform-dependent
-  import would trigger hook load failures on Mercurial. See pull request 32
-  for details.
-* Issue #341: Fix a ResourceWarning.
-
-------
-0.6.32
-------
-
-* Fix test suite with Python 2.6.
-* Fix some DeprecationWarnings and ResourceWarnings.
-* Issue #335: Backed out `setup_requires` superceding installed requirements
-  until regression can be addressed.
-
-------
-0.6.31
-------
-
-* Issue #303: Make sure the manifest only ever contains UTF-8 in Python 3.
-* Issue #329: Properly close files created by tests for compatibility with
-  Jython.
-* Work around Jython bugs `#1980 <http://bugs.jython.org/issue1980>`_ and
-  `#1981 <http://bugs.jython.org/issue1981>`_.
-* Issue #334: Provide workaround for packages that reference `sys.__stdout__`
-  such as numpy does. This change should address
-  `virtualenv #359 <https://github.com/pypa/virtualenv/issues/359>`_ as long
-  as the system encoding is UTF-8 or the IO encoding is specified in the
-  environment, i.e.::
-
-     PYTHONIOENCODING=utf8 pip install numpy
-
-* Fix for encoding issue when installing from Windows executable on Python 3.
-* Issue #323: Allow `setup_requires` requirements to supercede installed
-  requirements. Added some new keyword arguments to existing pkg_resources
-  methods. Also had to updated how __path__ is handled for namespace packages
-  to ensure that when a new egg distribution containing a namespace package is
-  placed on sys.path, the entries in __path__ are found in the same order they
-  would have been in had that egg been on the path when pkg_resources was
-  first imported.
-
-------
-0.6.30
-------
-
-* Issue #328: Clean up temporary directories in distribute_setup.py.
-* Fix fatal bug in distribute_setup.py.
-
-------
-0.6.29
-------
-
-* Pull Request #14: Honor file permissions in zip files.
-* Issue #327: Merged pull request #24 to fix a dependency problem with pip.
-* Merged pull request #23 to fix https://github.com/pypa/virtualenv/issues/301.
-* If Sphinx is installed, the `upload_docs` command now runs `build_sphinx`
-  to produce uploadable documentation.
-* Issue #326: `upload_docs` provided mangled auth credentials under Python 3.
-* Issue #320: Fix check for "createable" in distribute_setup.py.
-* Issue #305: Remove a warning that was triggered during normal operations.
-* Issue #311: Print metadata in UTF-8 independent of platform.
-* Issue #303: Read manifest file with UTF-8 encoding under Python 3.
-* Issue #301: Allow to run tests of namespace packages when using 2to3.
-* Issue #304: Prevent import loop in site.py under Python 3.3.
-* Issue #283: Reenable scanning of `*.pyc` / `*.pyo` files on Python 3.3.
-* Issue #299: The develop command didn't work on Python 3, when using 2to3,
-  as the egg link would go to the Python 2 source. Linking to the 2to3'd code
-  in build/lib makes it work, although you will have to rebuild the module
-  before testing it.
-* Issue #306: Even if 2to3 is used, we build in-place under Python 2.
-* Issue #307: Prints the full path when .svn/entries is broken.
-* Issue #313: Support for sdist subcommands (Python 2.7)
-* Issue #314: test_local_index() would fail an OS X.
-* Issue #310: Non-ascii characters in a namespace __init__.py causes errors.
-* Issue #218: Improved documentation on behavior of `package_data` and
-  `include_package_data`. Files indicated by `package_data` are now included
-  in the manifest.
-* `distribute_setup.py` now allows a `--download-base` argument for retrieving
-  distribute from a specified location.
-
-------
-0.6.28
-------
-
-* Issue #294: setup.py can now be invoked from any directory.
-* Scripts are now installed honoring the umask.
-* Added support for .dist-info directories.
-* Issue #283: Fix and disable scanning of `*.pyc` / `*.pyo` files on
-  Python 3.3.
-
-------
-0.6.27
-------
-
-* Support current snapshots of CPython 3.3.
-* Distribute now recognizes README.rst as a standard, default readme file.
-* Exclude 'encodings' modules when removing modules from sys.modules.
-  Workaround for #285.
-* Issue #231: Don't fiddle with system python when used with buildout
-  (bootstrap.py)
-
-------
-0.6.26
-------
-
-* Issue #183: Symlinked files are now extracted from source distributions.
-* Issue #227: Easy_install fetch parameters are now passed during the
-  installation of a source distribution; now fulfillment of setup_requires
-  dependencies will honor the parameters passed to easy_install.
-
-------
-0.6.25
-------
-
-* Issue #258: Workaround a cache issue
-* Issue #260: distribute_setup.py now accepts the --user parameter for
-  Python 2.6 and later.
-* Issue #262: package_index.open_with_auth no longer throws LookupError
-  on Python 3.
-* Issue #269: AttributeError when an exception occurs reading Manifest.in
-  on late releases of Python.
-* Issue #272: Prevent TypeError when namespace package names are unicode
-  and single-install-externally-managed is used. Also fixes PIP issue
-  449.
-* Issue #273: Legacy script launchers now install with Python2/3 support.
-
-------
-0.6.24
-------
-
-* Issue #249: Added options to exclude 2to3 fixers
-
-------
-0.6.23
-------
-
-* Issue #244: Fixed a test
-* Issue #243: Fixed a test
-* Issue #239: Fixed a test
-* Issue #240: Fixed a test
-* Issue #241: Fixed a test
-* Issue #237: Fixed a test
-* Issue #238: easy_install now uses 64bit executable wrappers on 64bit Python
-* Issue #208: Fixed parsed_versions, it now honors post-releases as noted in the documentation
-* Issue #207: Windows cli and gui wrappers pass CTRL-C to child python process
-* Issue #227: easy_install now passes its arguments to setup.py bdist_egg
-* Issue #225: Fixed a NameError on Python 2.5, 2.4
-
-------
-0.6.21
-------
-
-* Issue #225: FIxed a regression on py2.4
-
-------
-0.6.20
-------
-
-* Issue #135: Include url in warning when processing URLs in package_index.
-* Issue #212: Fix issue where easy_instal fails on Python 3 on windows installer.
-* Issue #213: Fix typo in documentation.
-
-------
-0.6.19
-------
-
-* Issue 206: AttributeError: 'HTTPMessage' object has no attribute 'getheaders'
-
-------
-0.6.18
-------
-
-* Issue 210: Fixed a regression introduced by Issue 204 fix.
-
-------
-0.6.17
-------
-
-* Support 'DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT' environment
-  variable to allow to disable installation of easy_install-${version} script.
-* Support Python >=3.1.4 and >=3.2.1.
-* Issue 204: Don't try to import the parent of a namespace package in
-  declare_namespace
-* Issue 196: Tolerate responses with multiple Content-Length headers
-* Issue 205: Sandboxing doesn't preserve working_set. Leads to setup_requires
-  problems.
-
-------
-0.6.16
-------
-
-* Builds sdist gztar even on Windows (avoiding Issue 193).
-* Issue 192: Fixed metadata omitted on Windows when package_dir
-  specified with forward-slash.
-* Issue 195: Cython build support.
-* Issue 200: Issues with recognizing 64-bit packages on Windows.
-
-------
-0.6.15
-------
-
-* Fixed typo in bdist_egg
-* Several issues under Python 3 has been solved.
-* Issue 146: Fixed missing DLL files after easy_install of windows exe package.
-
-------
-0.6.14
-------
-
-* Issue 170: Fixed unittest failure. Thanks to Toshio.
-* Issue 171: Fixed race condition in unittests cause deadlocks in test suite.
-* Issue 143: Fixed a lookup issue with easy_install.
-  Thanks to David and Zooko.
-* Issue 174: Fixed the edit mode when its used with setuptools itself
-
-------
-0.6.13
-------
-
-* Issue 160: 2.7 gives ValueError("Invalid IPv6 URL")
-* Issue 150: Fixed using ~/.local even in a --no-site-packages virtualenv
-* Issue 163: scan index links before external links, and don't use the md5 when
-  comparing two distributions
-
-------
-0.6.12
-------
-
-* Issue 149: Fixed various failures on 2.3/2.4
-
-------
-0.6.11
-------
-
-* Found another case of SandboxViolation - fixed
-* Issue 15 and 48: Introduced a socket timeout of 15 seconds on url openings
-* Added indexsidebar.html into MANIFEST.in
-* Issue 108: Fixed TypeError with Python3.1
-* Issue 121: Fixed --help install command trying to actually install.
-* Issue 112: Added an os.makedirs so that Tarek's solution will work.
-* Issue 133: Added --no-find-links to easy_install
-* Added easy_install --user
-* Issue 100: Fixed develop --user not taking '.' in PYTHONPATH into account
-* Issue 134: removed spurious UserWarnings. Patch by VanLindberg
-* Issue 138: cant_write_to_target error when setup_requires is used.
-* Issue 147: respect the sys.dont_write_bytecode flag
-
-------
-0.6.10
-------
-
-* Reverted change made for the DistributionNotFound exception because
-  zc.buildout uses the exception message to get the name of the
-  distribution.
-
------
-0.6.9
------
-
-* Issue 90: unknown setuptools version can be added in the working set
-* Issue 87: setupt.py doesn't try to convert distribute_setup.py anymore
-  Initial Patch by arfrever.
-* Issue 89: added a side bar with a download link to the doc.
-* Issue 86: fixed missing sentence in pkg_resources doc.
-* Added a nicer error message when a DistributionNotFound is raised.
-* Issue 80: test_develop now works with Python 3.1
-* Issue 93: upload_docs now works if there is an empty sub-directory.
-* Issue 70: exec bit on non-exec files
-* Issue 99: now the standalone easy_install command doesn't uses a
-  "setup.cfg" if any exists in the working directory. It will use it
-  only if triggered by ``install_requires`` from a setup.py call
-  (install, develop, etc).
-* Issue 101: Allowing ``os.devnull`` in Sandbox
-* Issue 92: Fixed the "no eggs" found error with MacPort
-  (platform.mac_ver() fails)
-* Issue 103: test_get_script_header_jython_workaround not run
-  anymore under py3 with C or POSIX local. Contributed by Arfrever.
-* Issue 104: remvoved the assertion when the installation fails,
-  with a nicer message for the end user.
-* Issue 100: making sure there's no SandboxViolation when
-  the setup script patches setuptools.
-
------
-0.6.8
------
-
-* Added "check_packages" in dist. (added in Setuptools 0.6c11)
-* Fixed the DONT_PATCH_SETUPTOOLS state.
-
------
-0.6.7
------
-
-* Issue 58: Added --user support to the develop command
-* Issue 11: Generated scripts now wrap their call to the script entry point
-  in the standard "if name == 'main'"
-* Added the 'DONT_PATCH_SETUPTOOLS' environment variable, so virtualenv
-  can drive an installation that doesn't patch a global setuptools.
-* Reviewed unladen-swallow specific change from
-  http://code.google.com/p/unladen-swallow/source/detail?spec=svn875&r=719
-  and determined that it no longer applies. Distribute should work fine with
-  Unladen Swallow 2009Q3.
-* Issue 21: Allow PackageIndex.open_url to gracefully handle all cases of a
-  httplib.HTTPException instead of just InvalidURL and BadStatusLine.
-* Removed virtual-python.py from this distribution and updated documentation
-  to point to the actively maintained virtualenv instead.
-* Issue 64: use_setuptools no longer rebuilds the distribute egg every
-  time it is run
-* use_setuptools now properly respects the requested version
-* use_setuptools will no longer try to import a distribute egg for the
-  wrong Python version
-* Issue 74: no_fake should be True by default.
-* Issue 72: avoid a bootstrapping issue with easy_install -U
-
------
-0.6.6
------
-
-* Unified the bootstrap file so it works on both py2.x and py3k without 2to3
-  (patch by Holger Krekel)
-
------
-0.6.5
------
-
-* Issue 65: cli.exe and gui.exe are now generated at build time,
-  depending on the platform in use.
-
-* Issue 67: Fixed doc typo (PEP 381/382)
-
-* Distribute no longer shadows setuptools if we require a 0.7-series
-  setuptools.  And an error is raised when installing a 0.7 setuptools with
-  distribute.
-
-* When run from within buildout, no attempt is made to modify an existing
-  setuptools egg, whether in a shared egg directory or a system setuptools.
-
-* Fixed a hole in sandboxing allowing builtin file to write outside of
-  the sandbox.
-
------
-0.6.4
------
-
-* Added the generation of `distribute_setup_3k.py` during the release.
-  This closes issue #52.
-
-* Added an upload_docs command to easily upload project documentation to
-  PyPI's http://packages.python.org. This close issue #56.
-
-* Fixed a bootstrap bug on the use_setuptools() API.
-
------
-0.6.3
------
-
-setuptools
-==========
-
-* Fixed a bunch of calls to file() that caused crashes on Python 3.
-
-bootstrapping
-=============
-
-* Fixed a bug in sorting that caused bootstrap to fail on Python 3.
-
------
-0.6.2
------
-
-setuptools
-==========
-
-* Added Python 3 support; see docs/python3.txt.
-  This closes http://bugs.python.org/setuptools/issue39.
-
-* Added option to run 2to3 automatically when installing on Python 3.
-  This closes issue #31.
-
-* Fixed invalid usage of requirement.parse, that broke develop -d.
-  This closes http://bugs.python.org/setuptools/issue44.
-
-* Fixed script launcher for 64-bit Windows.
-  This closes http://bugs.python.org/setuptools/issue2.
-
-* KeyError when compiling extensions.
-  This closes http://bugs.python.org/setuptools/issue41.
-
-bootstrapping
-=============
-
-* Fixed bootstrap not working on Windows. This closes issue #49.
-
-* Fixed 2.6 dependencies. This closes issue #50.
-
-* Make sure setuptools is patched when running through easy_install
-  This closes http://bugs.python.org/setuptools/issue40.
-
------
-0.6.1
------
-
-setuptools
-==========
-
-* package_index.urlopen now catches BadStatusLine and malformed url errors.
-  This closes issue #16 and issue #18.
-
-* zip_ok is now False by default. This closes
-  http://bugs.python.org/setuptools/issue33.
-
-* Fixed invalid URL error catching. http://bugs.python.org/setuptools/issue20.
-
-* Fixed invalid bootstraping with easy_install installation (issue #40).
-  Thanks to Florian Schulze for the help.
-
-* Removed buildout/bootstrap.py. A new repository will create a specific
-  bootstrap.py script.
-
-
-bootstrapping
-=============
-
-* The boostrap process leave setuptools alone if detected in the system
-  and --root or --prefix is provided, but is not in the same location.
-  This closes issue #10.
-
----
-0.6
----
-
-setuptools
-==========
-
-* Packages required at build time where not fully present at install time.
-  This closes issue #12.
-
-* Protected against failures in tarfile extraction. This closes issue #10.
-
-* Made Jython api_tests.txt doctest compatible. This closes issue #7.
-
-* sandbox.py replaced builtin type file with builtin function open. This
-  closes issue #6.
-
-* Immediately close all file handles. This closes issue #3.
-
-* Added compatibility with Subversion 1.6. This references issue #1.
-
-pkg_resources
-=============
-
-* Avoid a call to /usr/bin/sw_vers on OSX and use the official platform API
-  instead. Based on a patch from ronaldoussoren. This closes issue #5.
-
-* Fixed a SandboxViolation for mkdir that could occur in certain cases.
-  This closes issue #13.
-
-* Allow to find_on_path on systems with tight permissions to fail gracefully.
-  This closes issue #9.
-
-* Corrected inconsistency between documentation and code of add_entry.
-  This closes issue #8.
-
-* Immediately close all file handles. This closes issue #3.
-
-easy_install
-============
-
-* Immediately close all file handles. This closes issue #3.
-

vendor/distribute-0.6.34/CONTRIBUTORS.txt

@@ -1,30 +0,0 @@
-============
-Contributors
-============
-
-* Alex Grönholm
-* Alice Bevan-McGregor
-* Arfrever Frehtes Taifersar Arahesis
-* Christophe Combelles
-* Daniel Stutzbach
-* Daniel Holth
-* Hanno Schlichting
-* Jannis Leidel
-* Jason R. Coombs
-* Jim Fulton
-* Jonathan Lange
-* Justin Azoff
-* Lennart Regebro
-* Marc Abramowitz
-* Martin von Löwis
-* Noufal Ibrahim
-* Pete Hollobon
-* Philip Jenvey
-* Reinout van Rees
-* Robert Myers
-* Stefan H. Holek
-* Tarek Ziadé
-* Toshio Kuratomi
-
-If you think you name is missing, please add it (alpha order by first name)
-

vendor/distribute-0.6.34/DEVGUIDE.txt

@@ -1,22 +0,0 @@
-============================
-Quick notes for contributors
-============================
-
-Distribute is using Mercurial.
-
-Grab the code at bitbucket::
-
-    $ hg clone https://bitbucket.org/tarek/distribute
-
-If you want to contribute changes, we recommend you fork the repository on
-bitbucket, commit the changes to your repository, and then make a pull request
-on bitbucket. If you make some changes, don't forget to:
-
-- add a note in CHANGES.txt
-
-And remember that 0.6 (the only development line) is only bug fixes, and the
-APIs should be fully backward compatible with Setuptools.
-
-You can run the tests via::
-
-    $ python setup.py test

vendor/distribute-0.6.34/MANIFEST.in

@@ -1,9 +0,0 @@
-recursive-include setuptools *.py *.txt *.exe
-recursive-include tests *.py *.c *.pyx *.txt
-recursive-include setuptools/tests *.html
-recursive-include docs *.py *.txt *.conf *.css *.css_t Makefile indexsidebar.html
-recursive-include _markerlib *.py
-include *.py
-include *.txt
-include MANIFEST.in
-include launcher.c

vendor/distribute-0.6.34/PKG-INFO

@@ -1,868 +0,0 @@
-Metadata-Version: 1.1
-Name: distribute
-Version: 0.6.34
-Summary: Easily download, build, install, upgrade, and uninstall Python packages
-Home-page: http://packages.python.org/distribute
-Author: The fellowship of the packaging
-Author-email: distutils-sig@python.org
-License: PSF or ZPL
-Description: ===============================
-        Installing and Using Distribute
-        ===============================
-        
-        .. contents:: **Table of Contents**
-        
-        -----------
-        Disclaimers
-        -----------
-        
-        About the fork
-        ==============
-        
-        `Distribute` is a fork of the `Setuptools` project.
-        
-        Distribute is intended to replace Setuptools as the standard method
-        for working with Python module distributions.
-        
-        The fork has two goals:
-        
-        - Providing a backward compatible version to replace Setuptools
-          and make all distributions that depend on Setuptools work as
-          before, but with less bugs and behaviorial issues.
-        
-          This work is done in the 0.6.x series.
-        
-          Starting with version 0.6.2, Distribute supports Python 3.
-          Installing and using distribute for Python 3 code works exactly
-          the same as for Python 2 code, but Distribute also helps you to support
-          Python 2 and Python 3 from the same source code by letting you run 2to3
-          on the code as a part of the build process, by setting the keyword parameter
-          ``use_2to3`` to True. See http://packages.python.org/distribute for more
-          information.
-        
-        - Refactoring the code, and releasing it in several distributions.
-          This work is being done in the 0.7.x series but not yet released.
-        
-        The roadmap is still evolving, and the page that is up-to-date is
-        located at : `http://packages.python.org/distribute/roadmap`.
-        
-        If you install `Distribute` and want to switch back for any reason to
-        `Setuptools`, get to the `Uninstallation instructions`_ section.
-        
-        More documentation
-        ==================
-        
-        You can get more information in the Sphinx-based documentation, located
-        at http://packages.python.org/distribute. This documentation includes the old
-        Setuptools documentation that is slowly replaced, and brand new content.
-        
-        About the installation process
-        ==============================
-        
-        The `Distribute` installer modifies your installation by de-activating an
-        existing installation of `Setuptools` in a bootstrap process. This process
-        has been tested in various installation schemes and contexts but in case of a
-        bug during this process your Python installation might be left in a broken
-        state. Since all modified files and directories are copied before the
-        installation starts, you will be able to get back to a normal state by reading
-        the instructions in the `Uninstallation instructions`_ section.
-        
-        In any case, it is recommended to save you `site-packages` directory before
-        you start the installation of `Distribute`.
-        
-        -------------------------
-        Installation Instructions
-        -------------------------
-        
-        Distribute is only released as a source distribution.
-        
-        It can be installed using pip, and can be done so with the source tarball,
-        or by using the ``distribute_setup.py`` script provided online.
-        
-        ``distribute_setup.py`` is the simplest and preferred way on all systems.
-        
-        distribute_setup.py
-        ===================
-        
-        Download
-        `distribute_setup.py <http://python-distribute.org/distribute_setup.py>`_
-        and execute it, using the Python interpreter of your choice.
-        
-        If your shell has the ``curl`` program you can do::
-        
-            $ curl -O http://python-distribute.org/distribute_setup.py
-            $ python distribute_setup.py
-        
-        Notice this file is also provided in the source release.
-        
-        pip
-        ===
-        
-        Run easy_install or pip::
-        
-            $ pip install distribute
-        
-        Source installation
-        ===================
-        
-        Download the source tarball, uncompress it, then run the install command::
-        
-            $ curl -O http://pypi.python.org/packages/source/d/distribute/distribute-0.6.34.tar.gz
-            $ tar -xzvf distribute-0.6.34.tar.gz
-            $ cd distribute-0.6.34
-            $ python setup.py install
-        
-        ---------------------------
-        Uninstallation Instructions
-        ---------------------------
-        
-        Like other distutils-based distributions, Distribute doesn't provide an
-        uninstaller yet. It's all done manually! We are all waiting for PEP 376
-        support in Python.
-        
-        Distribute is installed in three steps:
-        
-        1. it gets out of the way an existing installation of Setuptools
-        2. it installs a `fake` setuptools installation
-        3. it installs distribute
-        
-        Distribute can be removed like this:
-        
-        - remove the ``distribute*.egg`` file located in your site-packages directory
-        - remove the ``setuptools.pth`` file located in you site-packages directory
-        - remove the easy_install script located in you ``sys.prefix/bin`` directory
-        - remove the ``setuptools*.egg`` directory located in your site-packages directory,
-          if any.
-        
-        If you want to get back to setuptools:
-        
-        - reinstall setuptools using its instruction.
-        
-        Lastly:
-        
-        - remove the *.OLD.* directory located in your site-packages directory if any,
-          **once you have checked everything was working correctly again**.
-        
-        -------------------------
-        Quick help for developers
-        -------------------------
-        
-        To create an egg which is compatible with Distribute, use the same
-        practice as with Setuptools, e.g.::
-        
-            from setuptools import setup
-        
-            setup(...
-            )
-        
-        To use `pkg_resources` to access data files in the egg, you should
-        require the Setuptools distribution explicitly::
-        
-            from setuptools import setup
-        
-            setup(...
-                install_requires=['setuptools']
-            )
-        
-        Only if you need Distribute-specific functionality should you depend
-        on it explicitly. In this case, replace the Setuptools dependency::
-        
-            from setuptools import setup
-        
-            setup(...
-                install_requires=['distribute']
-            )
-        
-        -----------
-        Install FAQ
-        -----------
-        
-        - **Why is Distribute wrapping my Setuptools installation?**
-        
-           Since Distribute is a fork, and since it provides the same package
-           and modules, it renames the existing Setuptools egg and inserts a
-           new one which merely wraps the Distribute code. This way, full
-           backwards compatibility is kept for packages which rely on the
-           Setuptools modules.
-        
-           At the same time, packages can meet their dependency on Setuptools
-           without actually installing it (which would disable Distribute).
-        
-        - **How does Distribute interact with virtualenv?**
-        
-          Everytime you create a virtualenv it will install setuptools by default.
-          You either need to re-install Distribute in it right after or pass the
-          ``--distribute`` option when creating it.
-        
-          Once installed, your virtualenv will use Distribute transparently.
-        
-          Although, if you have Setuptools installed in your system-wide Python,
-          and if the virtualenv you are in was generated without the `--no-site-packages`
-          option, the Distribute installation will stop.
-        
-          You need in this case to build a virtualenv with the `--no-site-packages`
-          option or to install `Distribute` globally.
-        
-        - **How does Distribute interacts with zc.buildout?**
-        
-          You can use Distribute in your zc.buildout, with the --distribute option,
-          starting at zc.buildout 1.4.2::
-        
-          $ python bootstrap.py --distribute
-        
-          For previous zc.buildout versions, *the only thing* you need to do
-          is use the bootstrap at `http://python-distribute.org/bootstrap.py`.  Run
-          that bootstrap and ``bin/buildout`` (and all other buildout-generated
-          scripts) will transparently use distribute instead of setuptools.  You do
-          not need a specific buildout release.
-        
-          A shared eggs directory is no problem (since 0.6.6): the setuptools egg is
-          left in place unmodified.  So other buildouts that do not yet use the new
-          bootstrap continue to work just fine.  And there is no need to list
-          ``distribute`` somewhere in your eggs: using the bootstrap is enough.
-        
-          The source code for the bootstrap script is located at
-          `http://bitbucket.org/tarek/buildout-distribute`.
-        
-        
-        
-        -----------------------------
-        Feedback and getting involved
-        -----------------------------
-        
-        - Mailing list: http://mail.python.org/mailman/listinfo/distutils-sig
-        - Issue tracker: http://bitbucket.org/tarek/distribute/issues/
-        - Code Repository: http://bitbucket.org/tarek/distribute
-        
-        =======
-        CHANGES
-        =======
-        
-        ----------
-        Unreleased
-        ----------
-        
-        + `Issue #341`_: 0.6.33 fails to build under python 2.4
-        
-        ------
-        0.6.33
-        ------
-        
-        * Fix 2 errors with Jython 2.5.
-        * Fix 1 failure with Jython 2.5 and 2.7.
-        * Disable workaround for Jython scripts on Linux systems.
-        * `Issue #336`_: `setup.py` no longer masks failure exit code when tests fail.
-        * Fix issue in pkg_resources where try/except around a platform-dependent
-          import would trigger hook load failures on Mercurial. See pull request 32
-          for details.
-        * `Issue #341`_: Fix a ResourceWarning.
-        
-        ------
-        0.6.32
-        ------
-        
-        * Fix test suite with Python 2.6.
-        * Fix some DeprecationWarnings and ResourceWarnings.
-        * `Issue #335`_: Backed out `setup_requires` superceding installed requirements
-          until regression can be addressed.
-        
-        ------
-        0.6.31
-        ------
-        
-        * `Issue #303`_: Make sure the manifest only ever contains UTF-8 in Python 3.
-        * `Issue #329`_: Properly close files created by tests for compatibility with
-          Jython.
-        * Work around Jython bugs `#1980 <http://bugs.jython.org/`issue1980`_>`_ and
-          `#1981 <http://bugs.jython.org/`issue1981`_>`_.
-        * `Issue #334`_: Provide workaround for packages that reference `sys.__stdout__`
-          such as numpy does. This change should address
-          `virtualenv #359 <https://github.com/pypa/virtualenv/issues/359>`_ as long
-          as the system encoding is UTF-8 or the IO encoding is specified in the
-          environment, i.e.::
-        
-             PYTHONIOENCODING=utf8 pip install numpy
-        
-        * Fix for encoding issue when installing from Windows executable on Python 3.
-        * `Issue #323`_: Allow `setup_requires` requirements to supercede installed
-          requirements. Added some new keyword arguments to existing pkg_resources
-          methods. Also had to updated how __path__ is handled for namespace packages
-          to ensure that when a new egg distribution containing a namespace package is
-          placed on sys.path, the entries in __path__ are found in the same order they
-          would have been in had that egg been on the path when pkg_resources was
-          first imported.
-        
-        ------
-        0.6.30
-        ------
-        
-        * `Issue #328`_: Clean up temporary directories in distribute_setup.py.
-        * Fix fatal bug in distribute_setup.py.
-        
-        ------
-        0.6.29
-        ------
-        
-        * Pull Request #14: Honor file permissions in zip files.
-        * `Issue #327`_: Merged pull request #24 to fix a dependency problem with pip.
-        * Merged pull request #23 to fix https://github.com/pypa/virtualenv/issues/301.
-        * If Sphinx is installed, the `upload_docs` command now runs `build_sphinx`
-          to produce uploadable documentation.
-        * `Issue #326`_: `upload_docs` provided mangled auth credentials under Python 3.
-        * `Issue #320`_: Fix check for "createable" in distribute_setup.py.
-        * `Issue #305`_: Remove a warning that was triggered during normal operations.
-        * `Issue #311`_: Print metadata in UTF-8 independent of platform.
-        * `Issue #303`_: Read manifest file with UTF-8 encoding under Python 3.
-        * `Issue #301`_: Allow to run tests of namespace packages when using 2to3.
-        * `Issue #304`_: Prevent import loop in site.py under Python 3.3.
-        * `Issue #283`_: Reenable scanning of `*.pyc` / `*.pyo` files on Python 3.3.
-        * `Issue #299`_: The develop command didn't work on Python 3, when using 2to3,
-          as the egg link would go to the Python 2 source. Linking to the 2to3'd code
-          in build/lib makes it work, although you will have to rebuild the module
-          before testing it.
-        * `Issue #306`_: Even if 2to3 is used, we build in-place under Python 2.
-        * `Issue #307`_: Prints the full path when .svn/entries is broken.
-        * `Issue #313`_: Support for sdist subcommands (Python 2.7)
-        * `Issue #314`_: test_local_index() would fail an OS X.
-        * `Issue #310`_: Non-ascii characters in a namespace __init__.py causes errors.
-        * `Issue #218`_: Improved documentation on behavior of `package_data` and
-          `include_package_data`. Files indicated by `package_data` are now included
-          in the manifest.
-        * `distribute_setup.py` now allows a `--download-base` argument for retrieving
-          distribute from a specified location.
-        
-        ------
-        0.6.28
-        ------
-        
-        * `Issue #294`_: setup.py can now be invoked from any directory.
-        * Scripts are now installed honoring the umask.
-        * Added support for .dist-info directories.
-        * `Issue #283`_: Fix and disable scanning of `*.pyc` / `*.pyo` files on
-          Python 3.3.
-        
-        ------
-        0.6.27
-        ------
-        
-        * Support current snapshots of CPython 3.3.
-        * Distribute now recognizes README.rst as a standard, default readme file.
-        * Exclude 'encodings' modules when removing modules from sys.modules.
-          Workaround for #285.
-        * `Issue #231`_: Don't fiddle with system python when used with buildout
-          (bootstrap.py)
-        
-        ------
-        0.6.26
-        ------
-        
-        * `Issue #183`_: Symlinked files are now extracted from source distributions.
-        * `Issue #227`_: Easy_install fetch parameters are now passed during the
-          installation of a source distribution; now fulfillment of setup_requires
-          dependencies will honor the parameters passed to easy_install.
-        
-        ------
-        0.6.25
-        ------
-        
-        * `Issue #258`_: Workaround a cache issue
-        * `Issue #260`_: distribute_setup.py now accepts the --user parameter for
-          Python 2.6 and later.
-        * `Issue #262`_: package_index.open_with_auth no longer throws LookupError
-          on Python 3.
-        * `Issue #269`_: AttributeError when an exception occurs reading Manifest.in
-          on late releases of Python.
-        * `Issue #272`_: Prevent TypeError when namespace package names are unicode
-          and single-install-externally-managed is used. Also fixes PIP `issue
-          449`_.
-        * `Issue #273`_: Legacy script launchers now install with Python2/3 support.
-        
-        ------
-        0.6.24
-        ------
-        
-        * `Issue #249`_: Added options to exclude 2to3 fixers
-        
-        ------
-        0.6.23
-        ------
-        
-        * `Issue #244`_: Fixed a test
-        * `Issue #243`_: Fixed a test
-        * `Issue #239`_: Fixed a test
-        * `Issue #240`_: Fixed a test
-        * `Issue #241`_: Fixed a test
-        * `Issue #237`_: Fixed a test
-        * `Issue #238`_: easy_install now uses 64bit executable wrappers on 64bit Python
-        * `Issue #208`_: Fixed parsed_versions, it now honors post-releases as noted in the documentation
-        * `Issue #207`_: Windows cli and gui wrappers pass CTRL-C to child python process
-        * `Issue #227`_: easy_install now passes its arguments to setup.py bdist_egg
-        * `Issue #225`_: Fixed a NameError on Python 2.5, 2.4
-        
-        ------
-        0.6.21
-        ------
-        
-        * `Issue #225`_: FIxed a regression on py2.4
-        
-        ------
-        0.6.20
-        ------
-        
-        * `Issue #135`_: Include url in warning when processing URLs in package_index.
-        * `Issue #212`_: Fix issue where easy_instal fails on Python 3 on windows installer.
-        * `Issue #213`_: Fix typo in documentation.
-        
-        ------
-        0.6.19
-        ------
-        
-        * `Issue 206`_: AttributeError: 'HTTPMessage' object has no attribute 'getheaders'
-        
-        ------
-        0.6.18
-        ------
-        
-        * `Issue 210`_: Fixed a regression introduced by `Issue 204`_ fix.
-        
-        ------
-        0.6.17
-        ------
-        
-        * Support 'DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT' environment
-          variable to allow to disable installation of easy_install-${version} script.
-        * Support Python >=3.1.4 and >=3.2.1.
-        * `Issue 204`_: Don't try to import the parent of a namespace package in
-          declare_namespace
-        * `Issue 196`_: Tolerate responses with multiple Content-Length headers
-        * `Issue 205`_: Sandboxing doesn't preserve working_set. Leads to setup_requires
-          problems.
-        
-        ------
-        0.6.16
-        ------
-        
-        * Builds sdist gztar even on Windows (avoiding `Issue 193`_).
-        * `Issue 192`_: Fixed metadata omitted on Windows when package_dir
-          specified with forward-slash.
-        * `Issue 195`_: Cython build support.
-        * `Issue 200`_: Issues with recognizing 64-bit packages on Windows.
-        
-        ------
-        0.6.15
-        ------
-        
-        * Fixed typo in bdist_egg
-        * Several issues under Python 3 has been solved.
-        * `Issue 146`_: Fixed missing DLL files after easy_install of windows exe package.
-        
-        ------
-        0.6.14
-        ------
-        
-        * `Issue 170`_: Fixed unittest failure. Thanks to Toshio.
-        * `Issue 171`_: Fixed race condition in unittests cause deadlocks in test suite.
-        * `Issue 143`_: Fixed a lookup issue with easy_install.
-          Thanks to David and Zooko.
-        * `Issue 174`_: Fixed the edit mode when its used with setuptools itself
-        
-        ------
-        0.6.13
-        ------
-        
-        * `Issue 160`_: 2.7 gives ValueError("Invalid IPv6 URL")
-        * `Issue 150`_: Fixed using ~/.local even in a --no-site-packages virtualenv
-        * `Issue 163`_: scan index links before external links, and don't use the md5 when
-          comparing two distributions
-        
-        ------
-        0.6.12
-        ------
-        
-        * `Issue 149`_: Fixed various failures on 2.3/2.4
-        
-        ------
-        0.6.11
-        ------
-        
-        * Found another case of SandboxViolation - fixed
-        * `Issue 15`_ and 48: Introduced a socket timeout of 15 seconds on url openings
-        * Added indexsidebar.html into MANIFEST.in
-        * `Issue 108`_: Fixed TypeError with Python3.1
-        * `Issue 121`_: Fixed --help install command trying to actually install.
-        * `Issue 112`_: Added an os.makedirs so that Tarek's solution will work.
-        * `Issue 133`_: Added --no-find-links to easy_install
-        * Added easy_install --user
-        * `Issue 100`_: Fixed develop --user not taking '.' in PYTHONPATH into account
-        * `Issue 134`_: removed spurious UserWarnings. Patch by VanLindberg
-        * `Issue 138`_: cant_write_to_target error when setup_requires is used.
-        * `Issue 147`_: respect the sys.dont_write_bytecode flag
-        
-        ------
-        0.6.10
-        ------
-        
-        * Reverted change made for the DistributionNotFound exception because
-          zc.buildout uses the exception message to get the name of the
-          distribution.
-        
-        -----
-        0.6.9
-        -----
-        
-        * `Issue 90`_: unknown setuptools version can be added in the working set
-        * `Issue 87`_: setupt.py doesn't try to convert distribute_setup.py anymore
-          Initial Patch by arfrever.
-        * `Issue 89`_: added a side bar with a download link to the doc.
-        * `Issue 86`_: fixed missing sentence in pkg_resources doc.
-        * Added a nicer error message when a DistributionNotFound is raised.
-        * `Issue 80`_: test_develop now works with Python 3.1
-        * `Issue 93`_: upload_docs now works if there is an empty sub-directory.
-        * `Issue 70`_: exec bit on non-exec files
-        * `Issue 99`_: now the standalone easy_install command doesn't uses a
-          "setup.cfg" if any exists in the working directory. It will use it
-          only if triggered by ``install_requires`` from a setup.py call
-          (install, develop, etc).
-        * `Issue 101`_: Allowing ``os.devnull`` in Sandbox
-        * `Issue 92`_: Fixed the "no eggs" found error with MacPort
-          (platform.mac_ver() fails)
-        * `Issue 103`_: test_get_script_header_jython_workaround not run
-          anymore under py3 with C or POSIX local. Contributed by Arfrever.
-        * `Issue 104`_: remvoved the assertion when the installation fails,
-          with a nicer message for the end user.
-        * `Issue 100`_: making sure there's no SandboxViolation when
-          the setup script patches setuptools.
-        
-        -----
-        0.6.8
-        -----
-        
-        * Added "check_packages" in dist. (added in Setuptools 0.6c11)
-        * Fixed the DONT_PATCH_SETUPTOOLS state.
-        
-        -----
-        0.6.7
-        -----
-        
-        * `Issue 58`_: Added --user support to the develop command
-        * `Issue 11`_: Generated scripts now wrap their call to the script entry point
-          in the standard "if name == 'main'"
-        * Added the 'DONT_PATCH_SETUPTOOLS' environment variable, so virtualenv
-          can drive an installation that doesn't patch a global setuptools.
-        * Reviewed unladen-swallow specific change from
-          http://code.google.com/p/unladen-swallow/source/detail?spec=svn875&r=719
-          and determined that it no longer applies. Distribute should work fine with
-          Unladen Swallow 2009Q3.
-        * `Issue 21`_: Allow PackageIndex.open_url to gracefully handle all cases of a
-          httplib.HTTPException instead of just InvalidURL and BadStatusLine.
-        * Removed virtual-python.py from this distribution and updated documentation
-          to point to the actively maintained virtualenv instead.
-        * `Issue 64`_: use_setuptools no longer rebuilds the distribute egg every
-          time it is run
-        * use_setuptools now properly respects the requested version
-        * use_setuptools will no longer try to import a distribute egg for the
-          wrong Python version
-        * `Issue 74`_: no_fake should be True by default.
-        * `Issue 72`_: avoid a bootstrapping issue with easy_install -U
-        
-        -----
-        0.6.6
-        -----
-        
-        * Unified the bootstrap file so it works on both py2.x and py3k without 2to3
-          (patch by Holger Krekel)
-        
-        -----
-        0.6.5
-        -----
-        
-        * `Issue 65`_: cli.exe and gui.exe are now generated at build time,
-          depending on the platform in use.
-        
-        * `Issue 67`_: Fixed doc typo (PEP 381/382)
-        
-        * Distribute no longer shadows setuptools if we require a 0.7-series
-          setuptools.  And an error is raised when installing a 0.7 setuptools with
-          distribute.
-        
-        * When run from within buildout, no attempt is made to modify an existing
-          setuptools egg, whether in a shared egg directory or a system setuptools.
-        
-        * Fixed a hole in sandboxing allowing builtin file to write outside of
-          the sandbox.
-        
-        -----
-        0.6.4
-        -----
-        
-        * Added the generation of `distribute_setup_3k.py` during the release.
-          This closes `issue #52`_.
-        
-        * Added an upload_docs command to easily upload project documentation to
-          PyPI's http://packages.python.org. This close `issue #56`_.
-        
-        * Fixed a bootstrap bug on the use_setuptools() API.
-        
-        -----
-        0.6.3
-        -----
-        
-        setuptools
-        ==========
-        
-        * Fixed a bunch of calls to file() that caused crashes on Python 3.
-        
-        bootstrapping
-        =============
-        
-        * Fixed a bug in sorting that caused bootstrap to fail on Python 3.
-        
-        -----
-        0.6.2
-        -----
-        
-        setuptools
-        ==========
-        
-        * Added Python 3 support; see docs/python3.txt.
-          This closes http://bugs.python.org/setuptools/`issue39`_.
-        
-        * Added option to run 2to3 automatically when installing on Python 3.
-          This closes `issue #31`_.
-        
-        * Fixed invalid usage of requirement.parse, that broke develop -d.
-          This closes http://bugs.python.org/setuptools/`issue44`_.
-        
-        * Fixed script launcher for 64-bit Windows.
-          This closes http://bugs.python.org/setuptools/`issue2`_.
-        
-        * KeyError when compiling extensions.
-          This closes http://bugs.python.org/setuptools/`issue41`_.
-        
-        bootstrapping
-        =============
-        
-        * Fixed bootstrap not working on Windows. This closes `issue #49`_.
-        
-        * Fixed 2.6 dependencies. This closes `issue #50`_.
-        
-        * Make sure setuptools is patched when running through easy_install
-          This closes http://bugs.python.org/setuptools/`issue40`_.
-        
-        -----
-        0.6.1
-        -----
-        
-        setuptools
-        ==========
-        
-        * package_index.urlopen now catches BadStatusLine and malformed url errors.
-          This closes `issue #16`_ and `issue #18`_.
-        
-        * zip_ok is now False by default. This closes
-          http://bugs.python.org/setuptools/`issue33`_.
-        
-        * Fixed invalid URL error catching. http://bugs.python.org/setuptools/`issue20`_.
-        
-        * Fixed invalid bootstraping with easy_install installation (`issue #40`_).
-          Thanks to Florian Schulze for the help.
-        
-        * Removed buildout/bootstrap.py. A new repository will create a specific
-          bootstrap.py script.
-        
-        
-        bootstrapping
-        =============
-        
-        * The boostrap process leave setuptools alone if detected in the system
-          and --root or --prefix is provided, but is not in the same location.
-          This closes `issue #10`_.
-        
-        ---
-        0.6
-        ---
-        
-        setuptools
-        ==========
-        
-        * Packages required at build time where not fully present at install time.
-          This closes `issue #12`_.
-        
-        * Protected against failures in tarfile extraction. This closes `issue #10`_.
-        
-        * Made Jython api_tests.txt doctest compatible. This closes `issue #7`_.
-        
-        * sandbox.py replaced builtin type file with builtin function open. This
-          closes `issue #6`_.
-        
-        * Immediately close all file handles. This closes `issue #3`_.
-        
-        * Added compatibility with Subversion 1.6. This references `issue #1`_.
-        
-        pkg_resources
-        =============
-        
-        * Avoid a call to /usr/bin/sw_vers on OSX and use the official platform API
-          instead. Based on a patch from ronaldoussoren. This closes `issue #5`_.
-        
-        * Fixed a SandboxViolation for mkdir that could occur in certain cases.
-          This closes `issue #13`_.
-        
-        * Allow to find_on_path on systems with tight permissions to fail gracefully.
-          This closes `issue #9`_.
-        
-        * Corrected inconsistency between documentation and code of add_entry.
-          This closes `issue #8`_.
-        
-        * Immediately close all file handles. This closes `issue #3`_.
-        
-        easy_install
-        ============
-        
-        * Immediately close all file handles. This closes `issue #3`_.
-        
-        
-        .. _`Issue #135`: http://bitbucket.org/tarek/distribute/issue/135
-        .. _`Issue #183`: http://bitbucket.org/tarek/distribute/issue/183
-        .. _`Issue #207`: http://bitbucket.org/tarek/distribute/issue/207
-        .. _`Issue #208`: http://bitbucket.org/tarek/distribute/issue/208
-        .. _`Issue #212`: http://bitbucket.org/tarek/distribute/issue/212
-        .. _`Issue #213`: http://bitbucket.org/tarek/distribute/issue/213
-        .. _`Issue #218`: http://bitbucket.org/tarek/distribute/issue/218
-        .. _`Issue #225`: http://bitbucket.org/tarek/distribute/issue/225
-        .. _`Issue #227`: http://bitbucket.org/tarek/distribute/issue/227
-        .. _`Issue #231`: http://bitbucket.org/tarek/distribute/issue/231
-        .. _`Issue #237`: http://bitbucket.org/tarek/distribute/issue/237
-        .. _`Issue #238`: http://bitbucket.org/tarek/distribute/issue/238
-        .. _`Issue #239`: http://bitbucket.org/tarek/distribute/issue/239
-        .. _`Issue #240`: http://bitbucket.org/tarek/distribute/issue/240
-        .. _`Issue #241`: http://bitbucket.org/tarek/distribute/issue/241
-        .. _`Issue #243`: http://bitbucket.org/tarek/distribute/issue/243
-        .. _`Issue #244`: http://bitbucket.org/tarek/distribute/issue/244
-        .. _`Issue #249`: http://bitbucket.org/tarek/distribute/issue/249
-        .. _`Issue #258`: http://bitbucket.org/tarek/distribute/issue/258
-        .. _`Issue #260`: http://bitbucket.org/tarek/distribute/issue/260
-        .. _`Issue #262`: http://bitbucket.org/tarek/distribute/issue/262
-        .. _`Issue #269`: http://bitbucket.org/tarek/distribute/issue/269
-        .. _`Issue #272`: http://bitbucket.org/tarek/distribute/issue/272
-        .. _`Issue #273`: http://bitbucket.org/tarek/distribute/issue/273
-        .. _`Issue #283`: http://bitbucket.org/tarek/distribute/issue/283
-        .. _`Issue #294`: http://bitbucket.org/tarek/distribute/issue/294
-        .. _`Issue #299`: http://bitbucket.org/tarek/distribute/issue/299
-        .. _`Issue #301`: http://bitbucket.org/tarek/distribute/issue/301
-        .. _`Issue #303`: http://bitbucket.org/tarek/distribute/issue/303
-        .. _`Issue #304`: http://bitbucket.org/tarek/distribute/issue/304
-        .. _`Issue #305`: http://bitbucket.org/tarek/distribute/issue/305
-        .. _`Issue #306`: http://bitbucket.org/tarek/distribute/issue/306
-        .. _`Issue #307`: http://bitbucket.org/tarek/distribute/issue/307
-        .. _`Issue #310`: http://bitbucket.org/tarek/distribute/issue/310
-        .. _`Issue #311`: http://bitbucket.org/tarek/distribute/issue/311
-        .. _`Issue #313`: http://bitbucket.org/tarek/distribute/issue/313
-        .. _`Issue #314`: http://bitbucket.org/tarek/distribute/issue/314
-        .. _`Issue #320`: http://bitbucket.org/tarek/distribute/issue/320
-        .. _`Issue #323`: http://bitbucket.org/tarek/distribute/issue/323
-        .. _`Issue #326`: http://bitbucket.org/tarek/distribute/issue/326
-        .. _`Issue #327`: http://bitbucket.org/tarek/distribute/issue/327
-        .. _`Issue #328`: http://bitbucket.org/tarek/distribute/issue/328
-        .. _`Issue #329`: http://bitbucket.org/tarek/distribute/issue/329
-        .. _`Issue #334`: http://bitbucket.org/tarek/distribute/issue/334
-        .. _`Issue #335`: http://bitbucket.org/tarek/distribute/issue/335
-        .. _`Issue #336`: http://bitbucket.org/tarek/distribute/issue/336
-        .. _`Issue #341`: http://bitbucket.org/tarek/distribute/issue/341
-        .. _`Issue 100`: http://bitbucket.org/tarek/distribute/issue/100
-        .. _`Issue 101`: http://bitbucket.org/tarek/distribute/issue/101
-        .. _`Issue 103`: http://bitbucket.org/tarek/distribute/issue/103
-        .. _`Issue 104`: http://bitbucket.org/tarek/distribute/issue/104
-        .. _`Issue 108`: http://bitbucket.org/tarek/distribute/issue/108
-        .. _`Issue 11`: http://bitbucket.org/tarek/distribute/issue/11
-        .. _`Issue 112`: http://bitbucket.org/tarek/distribute/issue/112
-        .. _`Issue 121`: http://bitbucket.org/tarek/distribute/issue/121
-        .. _`Issue 133`: http://bitbucket.org/tarek/distribute/issue/133
-        .. _`Issue 134`: http://bitbucket.org/tarek/distribute/issue/134
-        .. _`Issue 138`: http://bitbucket.org/tarek/distribute/issue/138
-        .. _`Issue 143`: http://bitbucket.org/tarek/distribute/issue/143
-        .. _`Issue 146`: http://bitbucket.org/tarek/distribute/issue/146
-        .. _`Issue 147`: http://bitbucket.org/tarek/distribute/issue/147
-        .. _`Issue 149`: http://bitbucket.org/tarek/distribute/issue/149
-        .. _`Issue 15`: http://bitbucket.org/tarek/distribute/issue/15
-        .. _`Issue 150`: http://bitbucket.org/tarek/distribute/issue/150
-        .. _`Issue 160`: http://bitbucket.org/tarek/distribute/issue/160
-        .. _`Issue 163`: http://bitbucket.org/tarek/distribute/issue/163
-        .. _`Issue 170`: http://bitbucket.org/tarek/distribute/issue/170
-        .. _`Issue 171`: http://bitbucket.org/tarek/distribute/issue/171
-        .. _`Issue 174`: http://bitbucket.org/tarek/distribute/issue/174
-        .. _`Issue 192`: http://bitbucket.org/tarek/distribute/issue/192
-        .. _`Issue 193`: http://bitbucket.org/tarek/distribute/issue/193
-        .. _`Issue 195`: http://bitbucket.org/tarek/distribute/issue/195
-        .. _`Issue 196`: http://bitbucket.org/tarek/distribute/issue/196
-        .. _`Issue 200`: http://bitbucket.org/tarek/distribute/issue/200
-        .. _`Issue 204`: http://bitbucket.org/tarek/distribute/issue/204
-        .. _`Issue 205`: http://bitbucket.org/tarek/distribute/issue/205
-        .. _`Issue 206`: http://bitbucket.org/tarek/distribute/issue/206
-        .. _`Issue 21`: http://bitbucket.org/tarek/distribute/issue/21
-        .. _`Issue 210`: http://bitbucket.org/tarek/distribute/issue/210
-        .. _`Issue 58`: http://bitbucket.org/tarek/distribute/issue/58
-        .. _`Issue 64`: http://bitbucket.org/tarek/distribute/issue/64
-        .. _`Issue 65`: http://bitbucket.org/tarek/distribute/issue/65
-        .. _`Issue 67`: http://bitbucket.org/tarek/distribute/issue/67
-        .. _`Issue 70`: http://bitbucket.org/tarek/distribute/issue/70
-        .. _`Issue 72`: http://bitbucket.org/tarek/distribute/issue/72
-        .. _`Issue 74`: http://bitbucket.org/tarek/distribute/issue/74
-        .. _`Issue 80`: http://bitbucket.org/tarek/distribute/issue/80
-        .. _`Issue 86`: http://bitbucket.org/tarek/distribute/issue/86
-        .. _`Issue 87`: http://bitbucket.org/tarek/distribute/issue/87
-        .. _`Issue 89`: http://bitbucket.org/tarek/distribute/issue/89
-        .. _`Issue 90`: http://bitbucket.org/tarek/distribute/issue/90
-        .. _`Issue 92`: http://bitbucket.org/tarek/distribute/issue/92
-        .. _`Issue 93`: http://bitbucket.org/tarek/distribute/issue/93
-        .. _`Issue 99`: http://bitbucket.org/tarek/distribute/issue/99
-        .. _`issue
-          449`: http://bitbucket.org/tarek/distribute/issue/449
-        .. _`issue #1`: http://bitbucket.org/tarek/distribute/issue/1
-        .. _`issue #10`: http://bitbucket.org/tarek/distribute/issue/10
-        .. _`issue #12`: http://bitbucket.org/tarek/distribute/issue/12
-        .. _`issue #13`: http://bitbucket.org/tarek/distribute/issue/13
-        .. _`issue #16`: http://bitbucket.org/tarek/distribute/issue/16
-        .. _`issue #18`: http://bitbucket.org/tarek/distribute/issue/18
-        .. _`issue #3`: http://bitbucket.org/tarek/distribute/issue/3
-        .. _`issue #31`: http://bitbucket.org/tarek/distribute/issue/31
-        .. _`issue #40`: http://bitbucket.org/tarek/distribute/issue/40
-        .. _`issue #49`: http://bitbucket.org/tarek/distribute/issue/49
-        .. _`issue #5`: http://bitbucket.org/tarek/distribute/issue/5
-        .. _`issue #50`: http://bitbucket.org/tarek/distribute/issue/50
-        .. _`issue #52`: http://bitbucket.org/tarek/distribute/issue/52
-        .. _`issue #56`: http://bitbucket.org/tarek/distribute/issue/56
-        .. _`issue #6`: http://bitbucket.org/tarek/distribute/issue/6
-        .. _`issue #7`: http://bitbucket.org/tarek/distribute/issue/7
-        .. _`issue #8`: http://bitbucket.org/tarek/distribute/issue/8
-        .. _`issue #9`: http://bitbucket.org/tarek/distribute/issue/9
-        .. _`issue1980`: http://bitbucket.org/tarek/distribute/issue/1980
-        .. _`issue1981`: http://bitbucket.org/tarek/distribute/issue/1981
-        .. _`issue2`: http://bitbucket.org/tarek/distribute/issue/2
-        .. _`issue20`: http://bitbucket.org/tarek/distribute/issue/20
-        .. _`issue33`: http://bitbucket.org/tarek/distribute/issue/33
-        .. _`issue39`: http://bitbucket.org/tarek/distribute/issue/39
-        .. _`issue40`: http://bitbucket.org/tarek/distribute/issue/40
-        .. _`issue41`: http://bitbucket.org/tarek/distribute/issue/41
-        .. _`issue44`: http://bitbucket.org/tarek/distribute/issue/44
-        
-        
-Keywords: CPAN PyPI distutils eggs package management
-Platform: UNKNOWN
-Classifier: Development Status :: 5 - Production/Stable
-Classifier: Intended Audience :: Developers
-Classifier: License :: OSI Approved :: Python Software Foundation License
-Classifier: License :: OSI Approved :: Zope Public License
-Classifier: Operating System :: OS Independent
-Classifier: Programming Language :: Python :: 2.4
-Classifier: Programming Language :: Python :: 2.5
-Classifier: Programming Language :: Python :: 2.6
-Classifier: Programming Language :: Python :: 2.7
-Classifier: Programming Language :: Python :: 3
-Classifier: Programming Language :: Python :: 3.1
-Classifier: Programming Language :: Python :: 3.2
-Classifier: Programming Language :: Python :: 3.3
-Classifier: Topic :: Software Development :: Libraries :: Python Modules
-Classifier: Topic :: System :: Archiving :: Packaging
-Classifier: Topic :: System :: Systems Administration
-Classifier: Topic :: Utilities

vendor/distribute-0.6.34/README.txt

@@ -1,228 +0,0 @@
-===============================
-Installing and Using Distribute
-===============================
-
-.. contents:: **Table of Contents**
-
------------
-Disclaimers
------------
-
-About the fork
-==============
-
-`Distribute` is a fork of the `Setuptools` project.
-
-Distribute is intended to replace Setuptools as the standard method
-for working with Python module distributions.
-
-The fork has two goals:
-
-- Providing a backward compatible version to replace Setuptools
-  and make all distributions that depend on Setuptools work as
-  before, but with less bugs and behaviorial issues.
-
-  This work is done in the 0.6.x series.
-
-  Starting with version 0.6.2, Distribute supports Python 3.
-  Installing and using distribute for Python 3 code works exactly
-  the same as for Python 2 code, but Distribute also helps you to support
-  Python 2 and Python 3 from the same source code by letting you run 2to3
-  on the code as a part of the build process, by setting the keyword parameter
-  ``use_2to3`` to True. See http://packages.python.org/distribute for more
-  information.
-
-- Refactoring the code, and releasing it in several distributions.
-  This work is being done in the 0.7.x series but not yet released.
-
-The roadmap is still evolving, and the page that is up-to-date is
-located at : `http://packages.python.org/distribute/roadmap`.
-
-If you install `Distribute` and want to switch back for any reason to
-`Setuptools`, get to the `Uninstallation instructions`_ section.
-
-More documentation
-==================
-
-You can get more information in the Sphinx-based documentation, located
-at http://packages.python.org/distribute. This documentation includes the old
-Setuptools documentation that is slowly replaced, and brand new content.
-
-About the installation process
-==============================
-
-The `Distribute` installer modifies your installation by de-activating an
-existing installation of `Setuptools` in a bootstrap process. This process
-has been tested in various installation schemes and contexts but in case of a
-bug during this process your Python installation might be left in a broken
-state. Since all modified files and directories are copied before the
-installation starts, you will be able to get back to a normal state by reading
-the instructions in the `Uninstallation instructions`_ section.
-
-In any case, it is recommended to save you `site-packages` directory before
-you start the installation of `Distribute`.
-
--------------------------
-Installation Instructions
--------------------------
-
-Distribute is only released as a source distribution.
-
-It can be installed using pip, and can be done so with the source tarball,
-or by using the ``distribute_setup.py`` script provided online.
-
-``distribute_setup.py`` is the simplest and preferred way on all systems.
-
-distribute_setup.py
-===================
-
-Download
-`distribute_setup.py <http://python-distribute.org/distribute_setup.py>`_
-and execute it, using the Python interpreter of your choice.
-
-If your shell has the ``curl`` program you can do::
-
-    $ curl -O http://python-distribute.org/distribute_setup.py
-    $ python distribute_setup.py
-
-Notice this file is also provided in the source release.
-
-pip
-===
-
-Run easy_install or pip::
-
-    $ pip install distribute
-
-Source installation
-===================
-
-Download the source tarball, uncompress it, then run the install command::
-
-    $ curl -O http://pypi.python.org/packages/source/d/distribute/distribute-0.6.34.tar.gz
-    $ tar -xzvf distribute-0.6.34.tar.gz
-    $ cd distribute-0.6.34
-    $ python setup.py install
-
----------------------------
-Uninstallation Instructions
----------------------------
-
-Like other distutils-based distributions, Distribute doesn't provide an
-uninstaller yet. It's all done manually! We are all waiting for PEP 376
-support in Python.
-
-Distribute is installed in three steps:
-
-1. it gets out of the way an existing installation of Setuptools
-2. it installs a `fake` setuptools installation
-3. it installs distribute
-
-Distribute can be removed like this:
-
-- remove the ``distribute*.egg`` file located in your site-packages directory
-- remove the ``setuptools.pth`` file located in you site-packages directory
-- remove the easy_install script located in you ``sys.prefix/bin`` directory
-- remove the ``setuptools*.egg`` directory located in your site-packages directory,
-  if any.
-
-If you want to get back to setuptools:
-
-- reinstall setuptools using its instruction.
-
-Lastly:
-
-- remove the *.OLD.* directory located in your site-packages directory if any,
-  **once you have checked everything was working correctly again**.
-
--------------------------
-Quick help for developers
--------------------------
-
-To create an egg which is compatible with Distribute, use the same
-practice as with Setuptools, e.g.::
-
-    from setuptools import setup
-
-    setup(...
-    )
-
-To use `pkg_resources` to access data files in the egg, you should
-require the Setuptools distribution explicitly::
-
-    from setuptools import setup
-
-    setup(...
-        install_requires=['setuptools']
-    )
-
-Only if you need Distribute-specific functionality should you depend
-on it explicitly. In this case, replace the Setuptools dependency::
-
-    from setuptools import setup
-
-    setup(...
-        install_requires=['distribute']
-    )
-
------------
-Install FAQ
------------
-
-- **Why is Distribute wrapping my Setuptools installation?**
-
-   Since Distribute is a fork, and since it provides the same package
-   and modules, it renames the existing Setuptools egg and inserts a
-   new one which merely wraps the Distribute code. This way, full
-   backwards compatibility is kept for packages which rely on the
-   Setuptools modules.
-
-   At the same time, packages can meet their dependency on Setuptools
-   without actually installing it (which would disable Distribute).
-
-- **How does Distribute interact with virtualenv?**
-
-  Everytime you create a virtualenv it will install setuptools by default.
-  You either need to re-install Distribute in it right after or pass the
-  ``--distribute`` option when creating it.
-
-  Once installed, your virtualenv will use Distribute transparently.
-
-  Although, if you have Setuptools installed in your system-wide Python,
-  and if the virtualenv you are in was generated without the `--no-site-packages`
-  option, the Distribute installation will stop.
-
-  You need in this case to build a virtualenv with the `--no-site-packages`
-  option or to install `Distribute` globally.
-
-- **How does Distribute interacts with zc.buildout?**
-
-  You can use Distribute in your zc.buildout, with the --distribute option,
-  starting at zc.buildout 1.4.2::
-
-  $ python bootstrap.py --distribute
-
-  For previous zc.buildout versions, *the only thing* you need to do
-  is use the bootstrap at `http://python-distribute.org/bootstrap.py`.  Run
-  that bootstrap and ``bin/buildout`` (and all other buildout-generated
-  scripts) will transparently use distribute instead of setuptools.  You do
-  not need a specific buildout release.
-
-  A shared eggs directory is no problem (since 0.6.6): the setuptools egg is
-  left in place unmodified.  So other buildouts that do not yet use the new
-  bootstrap continue to work just fine.  And there is no need to list
-  ``distribute`` somewhere in your eggs: using the bootstrap is enough.
-
-  The source code for the bootstrap script is located at
-  `http://bitbucket.org/tarek/buildout-distribute`.
-
-
-
------------------------------
-Feedback and getting involved
------------------------------
-
-- Mailing list: http://mail.python.org/mailman/listinfo/distutils-sig
-- Issue tracker: http://bitbucket.org/tarek/distribute/issues/
-- Code Repository: http://bitbucket.org/tarek/distribute
-

vendor/distribute-0.6.34/_markerlib/__init__.py

@@ -1,16 +0,0 @@
-try:
-    import ast
-    from _markerlib.markers import default_environment, compile, interpret
-except ImportError:
-    if 'ast' in globals():
-        raise
-    def default_environment():
-        return {}
-    def compile(marker):
-        def marker_fn(environment=None, override=None):
-            # 'empty markers are True' heuristic won't install extra deps.
-            return not marker.strip()
-        marker_fn.__doc__ = marker
-        return marker_fn
-    def interpret(marker, environment=None, override=None):
-        return compile(marker)()

vendor/distribute-0.6.34/_markerlib/markers.py

@@ -1,115 +0,0 @@
-# -*- coding: utf-8 -*-
-"""Interpret PEP 345 environment markers.
-
-EXPR [in|==|!=|not in] EXPR [or|and] ...
-
-where EXPR belongs to any of those:
-
-    python_version = '%s.%s' % (sys.version_info[0], sys.version_info[1])
-    python_full_version = sys.version.split()[0]
-    os.name = os.name
-    sys.platform = sys.platform
-    platform.version = platform.version()
-    platform.machine = platform.machine()
-    platform.python_implementation = platform.python_implementation()
-    a free string, like '2.6', or 'win32'
-"""
-
-__all__ = ['default_environment', 'compile', 'interpret']
-
-import ast
-import os
-import platform
-import sys
-import weakref
-
-_builtin_compile = compile
-
-try:
-    from platform import python_implementation
-except ImportError:
-    if os.name == "java":
-        # Jython 2.5 has ast module, but not platform.python_implementation() function.
-        def python_implementation():
-            return "Jython"
-    else:
-        raise
-
-
-# restricted set of variables
-_VARS = {'sys.platform': sys.platform,
-         'python_version': '%s.%s' % sys.version_info[:2],
-         # FIXME parsing sys.platform is not reliable, but there is no other
-         # way to get e.g. 2.7.2+, and the PEP is defined with sys.version
-         'python_full_version': sys.version.split(' ', 1)[0],
-         'os.name': os.name,
-         'platform.version': platform.version(),
-         'platform.machine': platform.machine(),
-         'platform.python_implementation': python_implementation(),
-         'extra': None # wheel extension
-        }
-
-def default_environment():
-    """Return copy of default PEP 385 globals dictionary."""
-    return dict(_VARS)
-
-class ASTWhitelist(ast.NodeTransformer):
-    def __init__(self, statement):
-        self.statement = statement # for error messages
-
-    ALLOWED = (ast.Compare, ast.BoolOp, ast.Attribute, ast.Name, ast.Load, ast.Str)
-    # Bool operations
-    ALLOWED += (ast.And, ast.Or)
-    # Comparison operations
-    ALLOWED += (ast.Eq, ast.Gt, ast.GtE, ast.In, ast.Is, ast.IsNot, ast.Lt, ast.LtE, ast.NotEq, ast.NotIn)
-
-    def visit(self, node):
-        """Ensure statement only contains allowed nodes."""
-        if not isinstance(node, self.ALLOWED):
-            raise SyntaxError('Not allowed in environment markers.\n%s\n%s' %
-                               (self.statement,
-                               (' ' * node.col_offset) + '^'))
-        return ast.NodeTransformer.visit(self, node)
-
-    def visit_Attribute(self, node):
-        """Flatten one level of attribute access."""
-        new_node = ast.Name("%s.%s" % (node.value.id, node.attr), node.ctx)
-        return ast.copy_location(new_node, node)
-
-def parse_marker(marker):
-    tree = ast.parse(marker, mode='eval')
-    new_tree = ASTWhitelist(marker).generic_visit(tree)
-    return new_tree
-
-def compile_marker(parsed_marker):
-    return _builtin_compile(parsed_marker, '<environment marker>', 'eval',
-                   dont_inherit=True)
-
-_cache = weakref.WeakValueDictionary()
-
-def compile(marker):
-    """Return compiled marker as a function accepting an environment dict."""
-    try:
-        return _cache[marker]
-    except KeyError:
-        pass
-    if not marker.strip():
-        def marker_fn(environment=None, override=None):
-            """"""
-            return True
-    else:
-        compiled_marker = compile_marker(parse_marker(marker))
-        def marker_fn(environment=None, override=None):
-            """override updates environment"""
-            if override is None:
-                override = {}
-            if environment is None:
-                environment = default_environment()
-            environment.update(override)
-            return eval(compiled_marker, environment)
-    marker_fn.__doc__ = marker
-    _cache[marker] = marker_fn
-    return _cache[marker]
-
-def interpret(marker, environment=None):
-    return compile(marker)(environment)

vendor/distribute-0.6.34/distribute.egg-info/PKG-INFO

@@ -1,868 +0,0 @@
-Metadata-Version: 1.1
-Name: distribute
-Version: 0.6.34
-Summary: Easily download, build, install, upgrade, and uninstall Python packages
-Home-page: http://packages.python.org/distribute
-Author: The fellowship of the packaging
-Author-email: distutils-sig@python.org
-License: PSF or ZPL
-Description: ===============================
-        Installing and Using Distribute
-        ===============================
-        
-        .. contents:: **Table of Contents**
-        
-        -----------
-        Disclaimers
-        -----------
-        
-        About the fork
-        ==============
-        
-        `Distribute` is a fork of the `Setuptools` project.
-        
-        Distribute is intended to replace Setuptools as the standard method
-        for working with Python module distributions.
-        
-        The fork has two goals:
-        
-        - Providing a backward compatible version to replace Setuptools
-          and make all distributions that depend on Setuptools work as
-          before, but with less bugs and behaviorial issues.
-        
-          This work is done in the 0.6.x series.
-        
-          Starting with version 0.6.2, Distribute supports Python 3.
-          Installing and using distribute for Python 3 code works exactly
-          the same as for Python 2 code, but Distribute also helps you to support
-          Python 2 and Python 3 from the same source code by letting you run 2to3
-          on the code as a part of the build process, by setting the keyword parameter
-          ``use_2to3`` to True. See http://packages.python.org/distribute for more
-          information.
-        
-        - Refactoring the code, and releasing it in several distributions.
-          This work is being done in the 0.7.x series but not yet released.
-        
-        The roadmap is still evolving, and the page that is up-to-date is
-        located at : `http://packages.python.org/distribute/roadmap`.
-        
-        If you install `Distribute` and want to switch back for any reason to
-        `Setuptools`, get to the `Uninstallation instructions`_ section.
-        
-        More documentation
-        ==================
-        
-        You can get more information in the Sphinx-based documentation, located
-        at http://packages.python.org/distribute. This documentation includes the old
-        Setuptools documentation that is slowly replaced, and brand new content.
-        
-        About the installation process
-        ==============================
-        
-        The `Distribute` installer modifies your installation by de-activating an
-        existing installation of `Setuptools` in a bootstrap process. This process
-        has been tested in various installation schemes and contexts but in case of a
-        bug during this process your Python installation might be left in a broken
-        state. Since all modified files and directories are copied before the
-        installation starts, you will be able to get back to a normal state by reading
-        the instructions in the `Uninstallation instructions`_ section.
-        
-        In any case, it is recommended to save you `site-packages` directory before
-        you start the installation of `Distribute`.
-        
-        -------------------------
-        Installation Instructions
-        -------------------------
-        
-        Distribute is only released as a source distribution.
-        
-        It can be installed using pip, and can be done so with the source tarball,
-        or by using the ``distribute_setup.py`` script provided online.
-        
-        ``distribute_setup.py`` is the simplest and preferred way on all systems.
-        
-        distribute_setup.py
-        ===================
-        
-        Download
-        `distribute_setup.py <http://python-distribute.org/distribute_setup.py>`_
-        and execute it, using the Python interpreter of your choice.
-        
-        If your shell has the ``curl`` program you can do::
-        
-            $ curl -O http://python-distribute.org/distribute_setup.py
-            $ python distribute_setup.py
-        
-        Notice this file is also provided in the source release.
-        
-        pip
-        ===
-        
-        Run easy_install or pip::
-        
-            $ pip install distribute
-        
-        Source installation
-        ===================
-        
-        Download the source tarball, uncompress it, then run the install command::
-        
-            $ curl -O http://pypi.python.org/packages/source/d/distribute/distribute-0.6.34.tar.gz
-            $ tar -xzvf distribute-0.6.34.tar.gz
-            $ cd distribute-0.6.34
-            $ python setup.py install
-        
-        ---------------------------
-        Uninstallation Instructions
-        ---------------------------
-        
-        Like other distutils-based distributions, Distribute doesn't provide an
-        uninstaller yet. It's all done manually! We are all waiting for PEP 376
-        support in Python.
-        
-        Distribute is installed in three steps:
-        
-        1. it gets out of the way an existing installation of Setuptools
-        2. it installs a `fake` setuptools installation
-        3. it installs distribute
-        
-        Distribute can be removed like this:
-        
-        - remove the ``distribute*.egg`` file located in your site-packages directory
-        - remove the ``setuptools.pth`` file located in you site-packages directory
-        - remove the easy_install script located in you ``sys.prefix/bin`` directory
-        - remove the ``setuptools*.egg`` directory located in your site-packages directory,
-          if any.
-        
-        If you want to get back to setuptools:
-        
-        - reinstall setuptools using its instruction.
-        
-        Lastly:
-        
-        - remove the *.OLD.* directory located in your site-packages directory if any,
-          **once you have checked everything was working correctly again**.
-        
-        -------------------------
-        Quick help for developers
-        -------------------------
-        
-        To create an egg which is compatible with Distribute, use the same
-        practice as with Setuptools, e.g.::
-        
-            from setuptools import setup
-        
-            setup(...
-            )
-        
-        To use `pkg_resources` to access data files in the egg, you should
-        require the Setuptools distribution explicitly::
-        
-            from setuptools import setup
-        
-            setup(...
-                install_requires=['setuptools']
-            )
-        
-        Only if you need Distribute-specific functionality should you depend
-        on it explicitly. In this case, replace the Setuptools dependency::
-        
-            from setuptools import setup
-        
-            setup(...
-                install_requires=['distribute']
-            )
-        
-        -----------
-        Install FAQ
-        -----------
-        
-        - **Why is Distribute wrapping my Setuptools installation?**
-        
-           Since Distribute is a fork, and since it provides the same package
-           and modules, it renames the existing Setuptools egg and inserts a
-           new one which merely wraps the Distribute code. This way, full
-           backwards compatibility is kept for packages which rely on the
-           Setuptools modules.
-        
-           At the same time, packages can meet their dependency on Setuptools
-           without actually installing it (which would disable Distribute).
-        
-        - **How does Distribute interact with virtualenv?**
-        
-          Everytime you create a virtualenv it will install setuptools by default.
-          You either need to re-install Distribute in it right after or pass the
-          ``--distribute`` option when creating it.
-        
-          Once installed, your virtualenv will use Distribute transparently.
-        
-          Although, if you have Setuptools installed in your system-wide Python,
-          and if the virtualenv you are in was generated without the `--no-site-packages`
-          option, the Distribute installation will stop.
-        
-          You need in this case to build a virtualenv with the `--no-site-packages`
-          option or to install `Distribute` globally.
-        
-        - **How does Distribute interacts with zc.buildout?**
-        
-          You can use Distribute in your zc.buildout, with the --distribute option,
-          starting at zc.buildout 1.4.2::
-        
-          $ python bootstrap.py --distribute
-        
-          For previous zc.buildout versions, *the only thing* you need to do
-          is use the bootstrap at `http://python-distribute.org/bootstrap.py`.  Run
-          that bootstrap and ``bin/buildout`` (and all other buildout-generated
-          scripts) will transparently use distribute instead of setuptools.  You do
-          not need a specific buildout release.
-        
-          A shared eggs directory is no problem (since 0.6.6): the setuptools egg is
-          left in place unmodified.  So other buildouts that do not yet use the new
-          bootstrap continue to work just fine.  And there is no need to list
-          ``distribute`` somewhere in your eggs: using the bootstrap is enough.
-        
-          The source code for the bootstrap script is located at
-          `http://bitbucket.org/tarek/buildout-distribute`.
-        
-        
-        
-        -----------------------------
-        Feedback and getting involved
-        -----------------------------
-        
-        - Mailing list: http://mail.python.org/mailman/listinfo/distutils-sig
-        - Issue tracker: http://bitbucket.org/tarek/distribute/issues/
-        - Code Repository: http://bitbucket.org/tarek/distribute
-        
-        =======
-        CHANGES
-        =======
-        
-        ----------
-        Unreleased
-        ----------
-        
-        + `Issue #341`_: 0.6.33 fails to build under python 2.4
-        
-        ------
-        0.6.33
-        ------
-        
-        * Fix 2 errors with Jython 2.5.
-        * Fix 1 failure with Jython 2.5 and 2.7.
-        * Disable workaround for Jython scripts on Linux systems.
-        * `Issue #336`_: `setup.py` no longer masks failure exit code when tests fail.
-        * Fix issue in pkg_resources where try/except around a platform-dependent
-          import would trigger hook load failures on Mercurial. See pull request 32
-          for details.
-        * `Issue #341`_: Fix a ResourceWarning.
-        
-        ------
-        0.6.32
-        ------
-        
-        * Fix test suite with Python 2.6.
-        * Fix some DeprecationWarnings and ResourceWarnings.
-        * `Issue #335`_: Backed out `setup_requires` superceding installed requirements
-          until regression can be addressed.
-        
-        ------
-        0.6.31
-        ------
-        
-        * `Issue #303`_: Make sure the manifest only ever contains UTF-8 in Python 3.
-        * `Issue #329`_: Properly close files created by tests for compatibility with
-          Jython.
-        * Work around Jython bugs `#1980 <http://bugs.jython.org/`issue1980`_>`_ and
-          `#1981 <http://bugs.jython.org/`issue1981`_>`_.
-        * `Issue #334`_: Provide workaround for packages that reference `sys.__stdout__`
-          such as numpy does. This change should address
-          `virtualenv #359 <https://github.com/pypa/virtualenv/issues/359>`_ as long
-          as the system encoding is UTF-8 or the IO encoding is specified in the
-          environment, i.e.::
-        
-             PYTHONIOENCODING=utf8 pip install numpy
-        
-        * Fix for encoding issue when installing from Windows executable on Python 3.
-        * `Issue #323`_: Allow `setup_requires` requirements to supercede installed
-          requirements. Added some new keyword arguments to existing pkg_resources
-          methods. Also had to updated how __path__ is handled for namespace packages
-          to ensure that when a new egg distribution containing a namespace package is
-          placed on sys.path, the entries in __path__ are found in the same order they
-          would have been in had that egg been on the path when pkg_resources was
-          first imported.
-        
-        ------
-        0.6.30
-        ------
-        
-        * `Issue #328`_: Clean up temporary directories in distribute_setup.py.
-        * Fix fatal bug in distribute_setup.py.
-        
-        ------
-        0.6.29
-        ------
-        
-        * Pull Request #14: Honor file permissions in zip files.
-        * `Issue #327`_: Merged pull request #24 to fix a dependency problem with pip.
-        * Merged pull request #23 to fix https://github.com/pypa/virtualenv/issues/301.
-        * If Sphinx is installed, the `upload_docs` command now runs `build_sphinx`
-          to produce uploadable documentation.
-        * `Issue #326`_: `upload_docs` provided mangled auth credentials under Python 3.
-        * `Issue #320`_: Fix check for "createable" in distribute_setup.py.
-        * `Issue #305`_: Remove a warning that was triggered during normal operations.
-        * `Issue #311`_: Print metadata in UTF-8 independent of platform.
-        * `Issue #303`_: Read manifest file with UTF-8 encoding under Python 3.
-        * `Issue #301`_: Allow to run tests of namespace packages when using 2to3.
-        * `Issue #304`_: Prevent import loop in site.py under Python 3.3.
-        * `Issue #283`_: Reenable scanning of `*.pyc` / `*.pyo` files on Python 3.3.
-        * `Issue #299`_: The develop command didn't work on Python 3, when using 2to3,
-          as the egg link would go to the Python 2 source. Linking to the 2to3'd code
-          in build/lib makes it work, although you will have to rebuild the module
-          before testing it.
-        * `Issue #306`_: Even if 2to3 is used, we build in-place under Python 2.
-        * `Issue #307`_: Prints the full path when .svn/entries is broken.
-        * `Issue #313`_: Support for sdist subcommands (Python 2.7)
-        * `Issue #314`_: test_local_index() would fail an OS X.
-        * `Issue #310`_: Non-ascii characters in a namespace __init__.py causes errors.
-        * `Issue #218`_: Improved documentation on behavior of `package_data` and
-          `include_package_data`. Files indicated by `package_data` are now included
-          in the manifest.
-        * `distribute_setup.py` now allows a `--download-base` argument for retrieving
-          distribute from a specified location.
-        
-        ------
-        0.6.28
-        ------
-        
-        * `Issue #294`_: setup.py can now be invoked from any directory.
-        * Scripts are now installed honoring the umask.
-        * Added support for .dist-info directories.
-        * `Issue #283`_: Fix and disable scanning of `*.pyc` / `*.pyo` files on
-          Python 3.3.
-        
-        ------
-        0.6.27
-        ------
-        
-        * Support current snapshots of CPython 3.3.
-        * Distribute now recognizes README.rst as a standard, default readme file.
-        * Exclude 'encodings' modules when removing modules from sys.modules.
-          Workaround for #285.
-        * `Issue #231`_: Don't fiddle with system python when used with buildout
-          (bootstrap.py)
-        
-        ------
-        0.6.26
-        ------
-        
-        * `Issue #183`_: Symlinked files are now extracted from source distributions.
-        * `Issue #227`_: Easy_install fetch parameters are now passed during the
-          installation of a source distribution; now fulfillment of setup_requires
-          dependencies will honor the parameters passed to easy_install.
-        
-        ------
-        0.6.25
-        ------
-        
-        * `Issue #258`_: Workaround a cache issue
-        * `Issue #260`_: distribute_setup.py now accepts the --user parameter for
-          Python 2.6 and later.
-        * `Issue #262`_: package_index.open_with_auth no longer throws LookupError
-          on Python 3.
-        * `Issue #269`_: AttributeError when an exception occurs reading Manifest.in
-          on late releases of Python.
-        * `Issue #272`_: Prevent TypeError when namespace package names are unicode
-          and single-install-externally-managed is used. Also fixes PIP `issue
-          449`_.
-        * `Issue #273`_: Legacy script launchers now install with Python2/3 support.
-        
-        ------
-        0.6.24
-        ------
-        
-        * `Issue #249`_: Added options to exclude 2to3 fixers
-        
-        ------
-        0.6.23
-        ------
-        
-        * `Issue #244`_: Fixed a test
-        * `Issue #243`_: Fixed a test
-        * `Issue #239`_: Fixed a test
-        * `Issue #240`_: Fixed a test
-        * `Issue #241`_: Fixed a test
-        * `Issue #237`_: Fixed a test
-        * `Issue #238`_: easy_install now uses 64bit executable wrappers on 64bit Python
-        * `Issue #208`_: Fixed parsed_versions, it now honors post-releases as noted in the documentation
-        * `Issue #207`_: Windows cli and gui wrappers pass CTRL-C to child python process
-        * `Issue #227`_: easy_install now passes its arguments to setup.py bdist_egg
-        * `Issue #225`_: Fixed a NameError on Python 2.5, 2.4
-        
-        ------
-        0.6.21
-        ------
-        
-        * `Issue #225`_: FIxed a regression on py2.4
-        
-        ------
-        0.6.20
-        ------
-        
-        * `Issue #135`_: Include url in warning when processing URLs in package_index.
-        * `Issue #212`_: Fix issue where easy_instal fails on Python 3 on windows installer.
-        * `Issue #213`_: Fix typo in documentation.
-        
-        ------
-        0.6.19
-        ------
-        
-        * `Issue 206`_: AttributeError: 'HTTPMessage' object has no attribute 'getheaders'
-        
-        ------
-        0.6.18
-        ------
-        
-        * `Issue 210`_: Fixed a regression introduced by `Issue 204`_ fix.
-        
-        ------
-        0.6.17
-        ------
-        
-        * Support 'DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT' environment
-          variable to allow to disable installation of easy_install-${version} script.
-        * Support Python >=3.1.4 and >=3.2.1.
-        * `Issue 204`_: Don't try to import the parent of a namespace package in
-          declare_namespace
-        * `Issue 196`_: Tolerate responses with multiple Content-Length headers
-        * `Issue 205`_: Sandboxing doesn't preserve working_set. Leads to setup_requires
-          problems.
-        
-        ------
-        0.6.16
-        ------
-        
-        * Builds sdist gztar even on Windows (avoiding `Issue 193`_).
-        * `Issue 192`_: Fixed metadata omitted on Windows when package_dir
-          specified with forward-slash.
-        * `Issue 195`_: Cython build support.
-        * `Issue 200`_: Issues with recognizing 64-bit packages on Windows.
-        
-        ------
-        0.6.15
-        ------
-        
-        * Fixed typo in bdist_egg
-        * Several issues under Python 3 has been solved.
-        * `Issue 146`_: Fixed missing DLL files after easy_install of windows exe package.
-        
-        ------
-        0.6.14
-        ------
-        
-        * `Issue 170`_: Fixed unittest failure. Thanks to Toshio.
-        * `Issue 171`_: Fixed race condition in unittests cause deadlocks in test suite.
-        * `Issue 143`_: Fixed a lookup issue with easy_install.
-          Thanks to David and Zooko.
-        * `Issue 174`_: Fixed the edit mode when its used with setuptools itself
-        
-        ------
-        0.6.13
-        ------
-        
-        * `Issue 160`_: 2.7 gives ValueError("Invalid IPv6 URL")
-        * `Issue 150`_: Fixed using ~/.local even in a --no-site-packages virtualenv
-        * `Issue 163`_: scan index links before external links, and don't use the md5 when
-          comparing two distributions
-        
-        ------
-        0.6.12
-        ------
-        
-        * `Issue 149`_: Fixed various failures on 2.3/2.4
-        
-        ------
-        0.6.11
-        ------
-        
-        * Found another case of SandboxViolation - fixed
-        * `Issue 15`_ and 48: Introduced a socket timeout of 15 seconds on url openings
-        * Added indexsidebar.html into MANIFEST.in
-        * `Issue 108`_: Fixed TypeError with Python3.1
-        * `Issue 121`_: Fixed --help install command trying to actually install.
-        * `Issue 112`_: Added an os.makedirs so that Tarek's solution will work.
-        * `Issue 133`_: Added --no-find-links to easy_install
-        * Added easy_install --user
-        * `Issue 100`_: Fixed develop --user not taking '.' in PYTHONPATH into account
-        * `Issue 134`_: removed spurious UserWarnings. Patch by VanLindberg
-        * `Issue 138`_: cant_write_to_target error when setup_requires is used.
-        * `Issue 147`_: respect the sys.dont_write_bytecode flag
-        
-        ------
-        0.6.10
-        ------
-        
-        * Reverted change made for the DistributionNotFound exception because
-          zc.buildout uses the exception message to get the name of the
-          distribution.
-        
-        -----
-        0.6.9
-        -----
-        
-        * `Issue 90`_: unknown setuptools version can be added in the working set
-        * `Issue 87`_: setupt.py doesn't try to convert distribute_setup.py anymore
-          Initial Patch by arfrever.
-        * `Issue 89`_: added a side bar with a download link to the doc.
-        * `Issue 86`_: fixed missing sentence in pkg_resources doc.
-        * Added a nicer error message when a DistributionNotFound is raised.
-        * `Issue 80`_: test_develop now works with Python 3.1
-        * `Issue 93`_: upload_docs now works if there is an empty sub-directory.
-        * `Issue 70`_: exec bit on non-exec files
-        * `Issue 99`_: now the standalone easy_install command doesn't uses a
-          "setup.cfg" if any exists in the working directory. It will use it
-          only if triggered by ``install_requires`` from a setup.py call
-          (install, develop, etc).
-        * `Issue 101`_: Allowing ``os.devnull`` in Sandbox
-        * `Issue 92`_: Fixed the "no eggs" found error with MacPort
-          (platform.mac_ver() fails)
-        * `Issue 103`_: test_get_script_header_jython_workaround not run
-          anymore under py3 with C or POSIX local. Contributed by Arfrever.
-        * `Issue 104`_: remvoved the assertion when the installation fails,
-          with a nicer message for the end user.
-        * `Issue 100`_: making sure there's no SandboxViolation when
-          the setup script patches setuptools.
-        
-        -----
-        0.6.8
-        -----
-        
-        * Added "check_packages" in dist. (added in Setuptools 0.6c11)
-        * Fixed the DONT_PATCH_SETUPTOOLS state.
-        
-        -----
-        0.6.7
-        -----
-        
-        * `Issue 58`_: Added --user support to the develop command
-        * `Issue 11`_: Generated scripts now wrap their call to the script entry point
-          in the standard "if name == 'main'"
-        * Added the 'DONT_PATCH_SETUPTOOLS' environment variable, so virtualenv
-          can drive an installation that doesn't patch a global setuptools.
-        * Reviewed unladen-swallow specific change from
-          http://code.google.com/p/unladen-swallow/source/detail?spec=svn875&r=719
-          and determined that it no longer applies. Distribute should work fine with
-          Unladen Swallow 2009Q3.
-        * `Issue 21`_: Allow PackageIndex.open_url to gracefully handle all cases of a
-          httplib.HTTPException instead of just InvalidURL and BadStatusLine.
-        * Removed virtual-python.py from this distribution and updated documentation
-          to point to the actively maintained virtualenv instead.
-        * `Issue 64`_: use_setuptools no longer rebuilds the distribute egg every
-          time it is run
-        * use_setuptools now properly respects the requested version
-        * use_setuptools will no longer try to import a distribute egg for the
-          wrong Python version
-        * `Issue 74`_: no_fake should be True by default.
-        * `Issue 72`_: avoid a bootstrapping issue with easy_install -U
-        
-        -----
-        0.6.6
-        -----
-        
-        * Unified the bootstrap file so it works on both py2.x and py3k without 2to3
-          (patch by Holger Krekel)
-        
-        -----
-        0.6.5
-        -----
-        
-        * `Issue 65`_: cli.exe and gui.exe are now generated at build time,
-          depending on the platform in use.
-        
-        * `Issue 67`_: Fixed doc typo (PEP 381/382)
-        
-        * Distribute no longer shadows setuptools if we require a 0.7-series
-          setuptools.  And an error is raised when installing a 0.7 setuptools with
-          distribute.
-        
-        * When run from within buildout, no attempt is made to modify an existing
-          setuptools egg, whether in a shared egg directory or a system setuptools.
-        
-        * Fixed a hole in sandboxing allowing builtin file to write outside of
-          the sandbox.
-        
-        -----
-        0.6.4
-        -----
-        
-        * Added the generation of `distribute_setup_3k.py` during the release.
-          This closes `issue #52`_.
-        
-        * Added an upload_docs command to easily upload project documentation to
-          PyPI's http://packages.python.org. This close `issue #56`_.
-        
-        * Fixed a bootstrap bug on the use_setuptools() API.
-        
-        -----
-        0.6.3
-        -----
-        
-        setuptools
-        ==========
-        
-        * Fixed a bunch of calls to file() that caused crashes on Python 3.
-        
-        bootstrapping
-        =============
-        
-        * Fixed a bug in sorting that caused bootstrap to fail on Python 3.
-        
-        -----
-        0.6.2
-        -----
-        
-        setuptools
-        ==========
-        
-        * Added Python 3 support; see docs/python3.txt.
-          This closes http://bugs.python.org/setuptools/`issue39`_.
-        
-        * Added option to run 2to3 automatically when installing on Python 3.
-          This closes `issue #31`_.
-        
-        * Fixed invalid usage of requirement.parse, that broke develop -d.
-          This closes http://bugs.python.org/setuptools/`issue44`_.
-        
-        * Fixed script launcher for 64-bit Windows.
-          This closes http://bugs.python.org/setuptools/`issue2`_.
-        
-        * KeyError when compiling extensions.
-          This closes http://bugs.python.org/setuptools/`issue41`_.
-        
-        bootstrapping
-        =============
-        
-        * Fixed bootstrap not working on Windows. This closes `issue #49`_.
-        
-        * Fixed 2.6 dependencies. This closes `issue #50`_.
-        
-        * Make sure setuptools is patched when running through easy_install
-          This closes http://bugs.python.org/setuptools/`issue40`_.
-        
-        -----
-        0.6.1
-        -----
-        
-        setuptools
-        ==========
-        
-        * package_index.urlopen now catches BadStatusLine and malformed url errors.
-          This closes `issue #16`_ and `issue #18`_.
-        
-        * zip_ok is now False by default. This closes
-          http://bugs.python.org/setuptools/`issue33`_.
-        
-        * Fixed invalid URL error catching. http://bugs.python.org/setuptools/`issue20`_.
-        
-        * Fixed invalid bootstraping with easy_install installation (`issue #40`_).
-          Thanks to Florian Schulze for the help.
-        
-        * Removed buildout/bootstrap.py. A new repository will create a specific
-          bootstrap.py script.
-        
-        
-        bootstrapping
-        =============
-        
-        * The boostrap process leave setuptools alone if detected in the system
-          and --root or --prefix is provided, but is not in the same location.
-          This closes `issue #10`_.
-        
-        ---
-        0.6
-        ---
-        
-        setuptools
-        ==========
-        
-        * Packages required at build time where not fully present at install time.
-          This closes `issue #12`_.
-        
-        * Protected against failures in tarfile extraction. This closes `issue #10`_.
-        
-        * Made Jython api_tests.txt doctest compatible. This closes `issue #7`_.
-        
-        * sandbox.py replaced builtin type file with builtin function open. This
-          closes `issue #6`_.
-        
-        * Immediately close all file handles. This closes `issue #3`_.
-        
-        * Added compatibility with Subversion 1.6. This references `issue #1`_.
-        
-        pkg_resources
-        =============
-        
-        * Avoid a call to /usr/bin/sw_vers on OSX and use the official platform API
-          instead. Based on a patch from ronaldoussoren. This closes `issue #5`_.
-        
-        * Fixed a SandboxViolation for mkdir that could occur in certain cases.
-          This closes `issue #13`_.
-        
-        * Allow to find_on_path on systems with tight permissions to fail gracefully.
-          This closes `issue #9`_.
-        
-        * Corrected inconsistency between documentation and code of add_entry.
-          This closes `issue #8`_.
-        
-        * Immediately close all file handles. This closes `issue #3`_.
-        
-        easy_install
-        ============
-        
-        * Immediately close all file handles. This closes `issue #3`_.
-        
-        
-        .. _`Issue #135`: http://bitbucket.org/tarek/distribute/issue/135
-        .. _`Issue #183`: http://bitbucket.org/tarek/distribute/issue/183
-        .. _`Issue #207`: http://bitbucket.org/tarek/distribute/issue/207
-        .. _`Issue #208`: http://bitbucket.org/tarek/distribute/issue/208
-        .. _`Issue #212`: http://bitbucket.org/tarek/distribute/issue/212
-        .. _`Issue #213`: http://bitbucket.org/tarek/distribute/issue/213
-        .. _`Issue #218`: http://bitbucket.org/tarek/distribute/issue/218
-        .. _`Issue #225`: http://bitbucket.org/tarek/distribute/issue/225
-        .. _`Issue #227`: http://bitbucket.org/tarek/distribute/issue/227
-        .. _`Issue #231`: http://bitbucket.org/tarek/distribute/issue/231
-        .. _`Issue #237`: http://bitbucket.org/tarek/distribute/issue/237
-        .. _`Issue #238`: http://bitbucket.org/tarek/distribute/issue/238
-        .. _`Issue #239`: http://bitbucket.org/tarek/distribute/issue/239
-        .. _`Issue #240`: http://bitbucket.org/tarek/distribute/issue/240
-        .. _`Issue #241`: http://bitbucket.org/tarek/distribute/issue/241
-        .. _`Issue #243`: http://bitbucket.org/tarek/distribute/issue/243
-        .. _`Issue #244`: http://bitbucket.org/tarek/distribute/issue/244
-        .. _`Issue #249`: http://bitbucket.org/tarek/distribute/issue/249
-        .. _`Issue #258`: http://bitbucket.org/tarek/distribute/issue/258
-        .. _`Issue #260`: http://bitbucket.org/tarek/distribute/issue/260
-        .. _`Issue #262`: http://bitbucket.org/tarek/distribute/issue/262
-        .. _`Issue #269`: http://bitbucket.org/tarek/distribute/issue/269
-        .. _`Issue #272`: http://bitbucket.org/tarek/distribute/issue/272
-        .. _`Issue #273`: http://bitbucket.org/tarek/distribute/issue/273
-        .. _`Issue #283`: http://bitbucket.org/tarek/distribute/issue/283
-        .. _`Issue #294`: http://bitbucket.org/tarek/distribute/issue/294
-        .. _`Issue #299`: http://bitbucket.org/tarek/distribute/issue/299
-        .. _`Issue #301`: http://bitbucket.org/tarek/distribute/issue/301
-        .. _`Issue #303`: http://bitbucket.org/tarek/distribute/issue/303
-        .. _`Issue #304`: http://bitbucket.org/tarek/distribute/issue/304
-        .. _`Issue #305`: http://bitbucket.org/tarek/distribute/issue/305
-        .. _`Issue #306`: http://bitbucket.org/tarek/distribute/issue/306
-        .. _`Issue #307`: http://bitbucket.org/tarek/distribute/issue/307
-        .. _`Issue #310`: http://bitbucket.org/tarek/distribute/issue/310
-        .. _`Issue #311`: http://bitbucket.org/tarek/distribute/issue/311
-        .. _`Issue #313`: http://bitbucket.org/tarek/distribute/issue/313
-        .. _`Issue #314`: http://bitbucket.org/tarek/distribute/issue/314
-        .. _`Issue #320`: http://bitbucket.org/tarek/distribute/issue/320
-        .. _`Issue #323`: http://bitbucket.org/tarek/distribute/issue/323
-        .. _`Issue #326`: http://bitbucket.org/tarek/distribute/issue/326
-        .. _`Issue #327`: http://bitbucket.org/tarek/distribute/issue/327
-        .. _`Issue #328`: http://bitbucket.org/tarek/distribute/issue/328
-        .. _`Issue #329`: http://bitbucket.org/tarek/distribute/issue/329
-        .. _`Issue #334`: http://bitbucket.org/tarek/distribute/issue/334
-        .. _`Issue #335`: http://bitbucket.org/tarek/distribute/issue/335
-        .. _`Issue #336`: http://bitbucket.org/tarek/distribute/issue/336
-        .. _`Issue #341`: http://bitbucket.org/tarek/distribute/issue/341
-        .. _`Issue 100`: http://bitbucket.org/tarek/distribute/issue/100
-        .. _`Issue 101`: http://bitbucket.org/tarek/distribute/issue/101
-        .. _`Issue 103`: http://bitbucket.org/tarek/distribute/issue/103
-        .. _`Issue 104`: http://bitbucket.org/tarek/distribute/issue/104
-        .. _`Issue 108`: http://bitbucket.org/tarek/distribute/issue/108
-        .. _`Issue 11`: http://bitbucket.org/tarek/distribute/issue/11
-        .. _`Issue 112`: http://bitbucket.org/tarek/distribute/issue/112
-        .. _`Issue 121`: http://bitbucket.org/tarek/distribute/issue/121
-        .. _`Issue 133`: http://bitbucket.org/tarek/distribute/issue/133
-        .. _`Issue 134`: http://bitbucket.org/tarek/distribute/issue/134
-        .. _`Issue 138`: http://bitbucket.org/tarek/distribute/issue/138
-        .. _`Issue 143`: http://bitbucket.org/tarek/distribute/issue/143
-        .. _`Issue 146`: http://bitbucket.org/tarek/distribute/issue/146
-        .. _`Issue 147`: http://bitbucket.org/tarek/distribute/issue/147
-        .. _`Issue 149`: http://bitbucket.org/tarek/distribute/issue/149
-        .. _`Issue 15`: http://bitbucket.org/tarek/distribute/issue/15
-        .. _`Issue 150`: http://bitbucket.org/tarek/distribute/issue/150
-        .. _`Issue 160`: http://bitbucket.org/tarek/distribute/issue/160
-        .. _`Issue 163`: http://bitbucket.org/tarek/distribute/issue/163
-        .. _`Issue 170`: http://bitbucket.org/tarek/distribute/issue/170
-        .. _`Issue 171`: http://bitbucket.org/tarek/distribute/issue/171
-        .. _`Issue 174`: http://bitbucket.org/tarek/distribute/issue/174
-        .. _`Issue 192`: http://bitbucket.org/tarek/distribute/issue/192
-        .. _`Issue 193`: http://bitbucket.org/tarek/distribute/issue/193
-        .. _`Issue 195`: http://bitbucket.org/tarek/distribute/issue/195
-        .. _`Issue 196`: http://bitbucket.org/tarek/distribute/issue/196
-        .. _`Issue 200`: http://bitbucket.org/tarek/distribute/issue/200
-        .. _`Issue 204`: http://bitbucket.org/tarek/distribute/issue/204
-        .. _`Issue 205`: http://bitbucket.org/tarek/distribute/issue/205
-        .. _`Issue 206`: http://bitbucket.org/tarek/distribute/issue/206
-        .. _`Issue 21`: http://bitbucket.org/tarek/distribute/issue/21
-        .. _`Issue 210`: http://bitbucket.org/tarek/distribute/issue/210
-        .. _`Issue 58`: http://bitbucket.org/tarek/distribute/issue/58
-        .. _`Issue 64`: http://bitbucket.org/tarek/distribute/issue/64
-        .. _`Issue 65`: http://bitbucket.org/tarek/distribute/issue/65
-        .. _`Issue 67`: http://bitbucket.org/tarek/distribute/issue/67
-        .. _`Issue 70`: http://bitbucket.org/tarek/distribute/issue/70
-        .. _`Issue 72`: http://bitbucket.org/tarek/distribute/issue/72
-        .. _`Issue 74`: http://bitbucket.org/tarek/distribute/issue/74
-        .. _`Issue 80`: http://bitbucket.org/tarek/distribute/issue/80
-        .. _`Issue 86`: http://bitbucket.org/tarek/distribute/issue/86
-        .. _`Issue 87`: http://bitbucket.org/tarek/distribute/issue/87
-        .. _`Issue 89`: http://bitbucket.org/tarek/distribute/issue/89
-        .. _`Issue 90`: http://bitbucket.org/tarek/distribute/issue/90
-        .. _`Issue 92`: http://bitbucket.org/tarek/distribute/issue/92
-        .. _`Issue 93`: http://bitbucket.org/tarek/distribute/issue/93
-        .. _`Issue 99`: http://bitbucket.org/tarek/distribute/issue/99
-        .. _`issue
-          449`: http://bitbucket.org/tarek/distribute/issue/449
-        .. _`issue #1`: http://bitbucket.org/tarek/distribute/issue/1
-        .. _`issue #10`: http://bitbucket.org/tarek/distribute/issue/10
-        .. _`issue #12`: http://bitbucket.org/tarek/distribute/issue/12
-        .. _`issue #13`: http://bitbucket.org/tarek/distribute/issue/13
-        .. _`issue #16`: http://bitbucket.org/tarek/distribute/issue/16
-        .. _`issue #18`: http://bitbucket.org/tarek/distribute/issue/18
-        .. _`issue #3`: http://bitbucket.org/tarek/distribute/issue/3
-        .. _`issue #31`: http://bitbucket.org/tarek/distribute/issue/31
-        .. _`issue #40`: http://bitbucket.org/tarek/distribute/issue/40
-        .. _`issue #49`: http://bitbucket.org/tarek/distribute/issue/49
-        .. _`issue #5`: http://bitbucket.org/tarek/distribute/issue/5
-        .. _`issue #50`: http://bitbucket.org/tarek/distribute/issue/50
-        .. _`issue #52`: http://bitbucket.org/tarek/distribute/issue/52
-        .. _`issue #56`: http://bitbucket.org/tarek/distribute/issue/56
-        .. _`issue #6`: http://bitbucket.org/tarek/distribute/issue/6
-        .. _`issue #7`: http://bitbucket.org/tarek/distribute/issue/7
-        .. _`issue #8`: http://bitbucket.org/tarek/distribute/issue/8
-        .. _`issue #9`: http://bitbucket.org/tarek/distribute/issue/9
-        .. _`issue1980`: http://bitbucket.org/tarek/distribute/issue/1980
-        .. _`issue1981`: http://bitbucket.org/tarek/distribute/issue/1981
-        .. _`issue2`: http://bitbucket.org/tarek/distribute/issue/2
-        .. _`issue20`: http://bitbucket.org/tarek/distribute/issue/20
-        .. _`issue33`: http://bitbucket.org/tarek/distribute/issue/33
-        .. _`issue39`: http://bitbucket.org/tarek/distribute/issue/39
-        .. _`issue40`: http://bitbucket.org/tarek/distribute/issue/40
-        .. _`issue41`: http://bitbucket.org/tarek/distribute/issue/41
-        .. _`issue44`: http://bitbucket.org/tarek/distribute/issue/44
-        
-        
-Keywords: CPAN PyPI distutils eggs package management
-Platform: UNKNOWN
-Classifier: Development Status :: 5 - Production/Stable
-Classifier: Intended Audience :: Developers
-Classifier: License :: OSI Approved :: Python Software Foundation License
-Classifier: License :: OSI Approved :: Zope Public License
-Classifier: Operating System :: OS Independent
-Classifier: Programming Language :: Python :: 2.4
-Classifier: Programming Language :: Python :: 2.5
-Classifier: Programming Language :: Python :: 2.6
-Classifier: Programming Language :: Python :: 2.7
-Classifier: Programming Language :: Python :: 3
-Classifier: Programming Language :: Python :: 3.1
-Classifier: Programming Language :: Python :: 3.2
-Classifier: Programming Language :: Python :: 3.3
-Classifier: Topic :: Software Development :: Libraries :: Python Modules
-Classifier: Topic :: System :: Archiving :: Packaging
-Classifier: Topic :: System :: Systems Administration
-Classifier: Topic :: Utilities

vendor/distribute-0.6.34/distribute.egg-info/SOURCES.txt

@@ -1,109 +0,0 @@
-CHANGES.txt
-CONTRIBUTORS.txt
-DEVGUIDE.txt
-MANIFEST.in
-README.txt
-distribute_setup.py
-easy_install.py
-launcher.c
-pkg_resources.py
-release.py
-setup.cfg
-setup.py
-site.py
-_markerlib/__init__.py
-_markerlib/markers.py
-distribute.egg-info/PKG-INFO
-distribute.egg-info/SOURCES.txt
-distribute.egg-info/dependency_links.txt
-distribute.egg-info/entry_points.txt
-distribute.egg-info/top_level.txt
-distribute.egg-info/zip-safe
-docs/Makefile
-docs/conf.py
-docs/easy_install.txt
-docs/index.txt
-docs/pkg_resources.txt
-docs/python3.txt
-docs/roadmap.txt
-docs/setuptools.txt
-docs/using.txt
-docs/_templates/indexsidebar.html
-docs/_theme/nature/theme.conf
-docs/_theme/nature/static/nature.css_t
-docs/_theme/nature/static/pygments.css
-docs/build/html/_sources/easy_install.txt
-docs/build/html/_sources/index.txt
-docs/build/html/_sources/pkg_resources.txt
-docs/build/html/_sources/python3.txt
-docs/build/html/_sources/roadmap.txt
-docs/build/html/_sources/setuptools.txt
-docs/build/html/_sources/using.txt
-docs/build/html/_static/basic.css
-docs/build/html/_static/nature.css
-docs/build/html/_static/pygments.css
-setuptools/__init__.py
-setuptools/archive_util.py
-setuptools/cli-32.exe
-setuptools/cli-64.exe
-setuptools/cli.exe
-setuptools/depends.py
-setuptools/dist.py
-setuptools/extension.py
-setuptools/gui-32.exe
-setuptools/gui-64.exe
-setuptools/gui.exe
-setuptools/package_index.py
-setuptools/sandbox.py
-setuptools/script template (dev).py
-setuptools/script template.py
-setuptools/command/__init__.py
-setuptools/command/alias.py
-setuptools/command/bdist_egg.py
-setuptools/command/bdist_rpm.py
-setuptools/command/bdist_wininst.py
-setuptools/command/build_ext.py
-setuptools/command/build_py.py
-setuptools/command/develop.py
-setuptools/command/easy_install.py
-setuptools/command/egg_info.py
-setuptools/command/install.py
-setuptools/command/install_egg_info.py
-setuptools/command/install_lib.py
-setuptools/command/install_scripts.py
-setuptools/command/register.py
-setuptools/command/rotate.py
-setuptools/command/saveopts.py
-setuptools/command/sdist.py
-setuptools/command/setopt.py
-setuptools/command/test.py
-setuptools/command/upload.py
-setuptools/command/upload_docs.py
-setuptools/tests/__init__.py
-setuptools/tests/doctest.py
-setuptools/tests/py26compat.py
-setuptools/tests/server.py
-setuptools/tests/test_bdist_egg.py
-setuptools/tests/test_build_ext.py
-setuptools/tests/test_develop.py
-setuptools/tests/test_dist_info.py
-setuptools/tests/test_easy_install.py
-setuptools/tests/test_markerlib.py
-setuptools/tests/test_packageindex.py
-setuptools/tests/test_resources.py
-setuptools/tests/test_sandbox.py
-setuptools/tests/test_sdist.py
-setuptools/tests/test_test.py
-setuptools/tests/test_upload_docs.py
-setuptools/tests/win_script_wrapper.txt
-setuptools/tests/indexes/test_links_priority/external.html
-setuptools/tests/indexes/test_links_priority/simple/foobar/index.html
-tests/api_tests.txt
-tests/install_test.py
-tests/manual_test.py
-tests/test_distribute_setup.py
-tests/shlib_test/hello.c
-tests/shlib_test/hello.pyx
-tests/shlib_test/hellolib.c
-tests/shlib_test/setup.py
-tests/shlib_test/test_hello.py