setuptools v5.4.1

bin/compile

@@ -26,9 +26,10 @@ LEGACY_TRIGGER="lib/python2.7"
 PROFILE_PATH="$BUILD_DIR/.profile.d/python.sh"
 
 DEFAULT_PYTHON_VERSION="python-2.7.8"
+DEFAULT_PYTHON_STACK="cedar"
 PYTHON_EXE="/app/.heroku/python/bin/python"
 PIP_VERSION="1.5.6"
-SETUPTOOLS_VERSION="3.6"
+SETUPTOOLS_VERSION="5.4.1"
 
 # Setup bpwatch
 export PATH=$PATH:$ROOT_DIR/vendor/bpwatch
@@ -39,6 +40,7 @@ BUILDPACK_VERSION=v28
 # Support Anvil Build_IDs
 [ ! "$SLUG_ID" ] && SLUG_ID="defaultslug"
 [ ! "$REQUEST_ID" ] && REQUEST_ID=$SLUG_ID
+[ ! "$STACK" ] && STACK=$DEFAULT_PYTHON_STACK
 
 # Sanitizing environment variables.
 unset GIT_DIR PYTHONHOME PYTHONPATH LD_LIBRARY_PATH LIBRARY_PATH
@@ -99,7 +101,6 @@ bpwatch stop pre_compile
 
 # If no requirements given, assume `setup.py develop`.
 if [ ! -f requirements.txt ]; then
-  puts-step "No requirements.txt provided; assuming dist package."
   echo "-e ." > requirements.txt
 fi
 
@@ -108,6 +109,13 @@ if [ -f $CACHE_DIR/.heroku/python-version ]; then
   DEFAULT_PYTHON_VERSION=$(cat $CACHE_DIR/.heroku/python-version)
 fi
 
+# Stack fallback for non-declared caches.
+if [ -f $CACHE_DIR/.heroku/python-stack ]; then
+  CACHED_PYTHON_STACK=$(cat $CACHE_DIR/.heroku/python-stack)
+else
+  CACHED_PYTHON_STACK=$DEFAULT_PYTHON_STACK
+fi
+
 # If no runtime given, assume default version.
 if [ ! -f runtime.txt ]; then
   echo $DEFAULT_PYTHON_VERSION > runtime.txt
@@ -143,7 +151,7 @@ PYTHON_VERSION=$(cat runtime.txt)
 if [ -f .heroku/python-version ]; then
   if [ ! $(cat .heroku/python-version) = $PYTHON_VERSION ]; then
     bpwatch start uninstall_python
-      puts-step "Found $(cat .heroku/python-version), removing."
+      puts-step "Found runtime $(cat .heroku/python-version), removing"
       rm -fr .heroku/python
     bpwatch stop uninstall_python
   else
@@ -151,17 +159,25 @@ if [ -f .heroku/python-version ]; then
   fi
 fi
 
+if [ ! $STACK = $CACHED_PYTHON_STACK ]; then
+  bpwatch start uninstall_python
+    puts-step "Stack changed, re-installing runtime"
+    rm -fr .heroku/python
+    unset SKIP_INSTALL
+  bpwatch stop uninstall_python
+fi
+
 
 if [ ! "$SKIP_INSTALL" ]; then
   bpwatch start install_python
-    puts-step "Preparing Python runtime ($PYTHON_VERSION)"
+    puts-step "Installing runtime ($PYTHON_VERSION)"
 
     # Prepare destination directory.
     mkdir -p .heroku/python
 
-    curl http://lang-python.s3.amazonaws.com/runtimes/$PYTHON_VERSION.tar.gz -s | tar zxv -C .heroku/python &> /dev/null
+    curl http://lang-python.s3.amazonaws.com/$STACK/runtimes/$PYTHON_VERSION.tar.gz -s | tar zxv -C .heroku/python &> /dev/null
     if [[ $? != 0 ]] ; then
-      puts-warn "Requested runtime ($PYTHON_VERSION) was not found."
+      puts-warn "Requested runtime ($PYTHON_VERSION) is not available for this stack ($STACK)."
       puts-warn "Aborting.  More info: https://devcenter.heroku.com/articles/python-support"
       exit 1
     fi
@@ -170,11 +186,10 @@ if [ ! "$SKIP_INSTALL" ]; then
 
   # Record for future reference.
   echo $PYTHON_VERSION > .heroku/python-version
+  echo $STACK > .heroku/python-stack
   FRESH_PYTHON=true
 
   hash -r
-else
-  puts-step "Using Python runtime ($PYTHON_VERSION)"
 fi
 
 # If Pip isn't up to date:
@@ -185,7 +200,7 @@ if [ "$FRESH_PYTHON" ] || [[ ! $(pip --version) == *$PIP_VERSION* ]]; then
 
   bpwatch start install_setuptools
     # Prepare it for the real world
-    puts-step "Installing Setuptools ($SETUPTOOLS_VERSION)"
+    # puts-step "Installing Setuptools ($SETUPTOOLS_VERSION)"
     cd $ROOT_DIR/vendor/
     tar zxf setuptools-$SETUPTOOLS_VERSION.tar.gz
     cd $ROOT_DIR/vendor/setuptools-$SETUPTOOLS_VERSION/
@@ -194,7 +209,7 @@ if [ "$FRESH_PYTHON" ] || [[ ! $(pip --version) == *$PIP_VERSION* ]]; then
   bpwatch stop install_setuptoools
 
   bpwatch start install_pip
-    puts-step "Installing Pip ($PIP_VERSION)"
+    # puts-step "Installing Pip ($PIP_VERSION)"
 
     cd $ROOT_DIR/vendor/
     tar zxf pip-$PIP_VERSION.tar.gz
@@ -223,7 +238,7 @@ if (grep -Fiq "hg+" requirements.txt) then
 fi
 
 # Install dependencies with Pip.
-puts-step "Installing dependencies using Pip ($PIP_VERSION)"
+puts-step "Installing dependencies with pip"
 
 
 [ ! "$FRESH_PYTHON" ] && bpwatch start pip_install

builds/libraries/autoconf

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+
+OUT_PREFIX=$1
+
+echo "Building autoconf..."
+
+
+SOURCE_TARBALL='http://ftp.gnu.org/gnu/autoconf/autoconf-2.68.tar.gz'
+curl -L $SOURCE_TARBALL | tar xz
+
+cd autoconf-2.68
+./configure --prefix=$OUT_PREFIX
+make
+make install

builds/libraries/libffi

@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/autoconf
+
+OUT_PREFIX=$1
+
+# Use new path, containing autoconf.
+export PATH="/app/.heroku/python/bin/:$PATH"
+hash -r
+
+
+echo "Building libffi..."
+
+SOURCE_TARBALL='https://github.com/atgreen/libffi/archive/master.tar.gz'
+
+curl -L $SOURCE_TARBALL | tar xz
+mv libffi-master libffi
+
+cd libffi
+./autogen.sh
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+# Cleanup
+cd ..

builds/runtimes/python-2.6.0

@@ -2,6 +2,8 @@
 # Build Path: /app/.heroku/python/
 # Build Deps: libraries/sqlite
 
+# NOTICE: This formula only works for the cedar stack, not cedar-14.
+
 OUT_PREFIX=$1
 
 # Protect 2.6 builds from parent Python (causes segfault during build).

builds/runtimes/python-2.6.1

@@ -2,6 +2,8 @@
 # Build Path: /app/.heroku/python/
 # Build Deps: libraries/sqlite
 
+# NOTICE: This formula only works for the cedar stack, not cedar-14.
+
 OUT_PREFIX=$1
 
 # Protect 2.6 builds from parent Python (causes segfault during build).

builds/runtimes/python-2.7.8

@@ -10,6 +10,6 @@ curl -L $SOURCE_TARBALL | tar xz
 mv Python-2.7.8 src
 cd src
 
-./configure --prefix=$OUT_PREFIX --enable-shared
+./configure --prefix=$OUT_PREFIX
 make
 make install

builds/runtimes/python-3.3.5

@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# Build Path: /app/.heroku/python/
+# Build Deps: libraries/sqlite
+
+OUT_PREFIX=$1
+
+echo "Building Python..."
+SOURCE_TARBALL='http://python.org/ftp/python/3.3.5/Python-3.3.5.tgz'
+curl -L $SOURCE_TARBALL | tar xz
+mv Python-3.3.5 src
+cd src
+
+./configure --prefix=$OUT_PREFIX --enable-shared
+make
+make install
+
+ln $OUT_PREFIX/bin/python3 $OUT_PREFIX/bin/python

requirements.txt

@@ -1 +1 @@
-bob-builder==0.0.5
+bob-builder==0.0.5

test/distutils/envoy.py

@@ -1,210 +0,0 @@
-# -*- coding: utf-8 -*-
-"""
-envoy.core
-~~~~~~~~~~
-
-This module provides envoy awesomeness.
-
-Copyright 2012, Kenneth Reitz.
-MIT Licensed.
-
-"""
-
-import os
-import shlex
-import subprocess
-import threading
-
-
-__version__ = '0.0.2'
-__license__ = 'MIT'
-__author__ = 'Kenneth Reitz'
-
-
-class Command(object):
-    def __init__(self, cmd):
-        self.cmd = cmd
-        self.process = None
-        self.out = None
-        self.err = None
-        self.returncode = None
-        self.data = None
-
-    def run(self, data, timeout, env):
-        self.data = data
-        environ = dict(os.environ).update(env or {})
-
-        def target():
-
-            self.process = subprocess.Popen(self.cmd,
-                universal_newlines=True,
-                shell=False,
-                env=environ,
-                stdin=subprocess.PIPE,
-                stdout=subprocess.PIPE,
-                stderr=subprocess.PIPE,
-                bufsize=0,
-            )
-
-            self.out, self.err = self.process.communicate(self.data)
-
-        thread = threading.Thread(target=target)
-        thread.start()
-
-        thread.join(timeout)
-        if thread.is_alive():
-            self.process.terminate()
-            thread.join()
-        self.returncode = self.process.returncode
-        return self.out, self.err
-
-
-class ConnectedCommand(object):
-    def __init__(self,
-        process=None,
-        std_in=None,
-        std_out=None,
-        std_err=None):
-
-        self._process = process
-        self.std_in = std_in
-        self.std_out = std_out
-        self.std_err = std_out
-
-    def __enter__(self):
-        return self
-
-    def __exit__(self, type, value, traceback):
-        self.kill()
-
-    @property
-    def status_code(self):
-        """The status code of the process.
-        If the code is None, assume that it's still running.
-        """
-        if self._status_code is not None:
-            return self._status_code
-
-        # investigate
-        return None
-
-    @property
-    def pid(self):
-        """The process' PID."""
-        return self._process.pid
-
-    def kill(self):
-        """Kills the process."""
-        return self._process.kill()
-
-    def expect(self, bytes, stream=None):
-        """Block until given bytes appear in the stream."""
-        if stream is None:
-            stream = self.std_out
-        pass
-
-    def send(self, end='\n'):
-        """Sends a line to std_in."""
-        #TODO: Y U LINE BUFFER
-        pass
-
-    def block(self):
-        """Blocks until command finishes. Returns Response instance."""
-        self._status_code = self._process.wait()
-
-
-
-class Response(object):
-    """A command's response"""
-
-    def __init__(self, process=None):
-        super(Response, self).__init__()
-
-        self._process = process
-        self.command = None
-        self.std_err = None
-        self.std_out = None
-        self.status_code = None
-        self.history = []
-
-
-    def __repr__(self):
-        if len(self.command):
-            return '<Response [{0}]>'.format(self.command[0])
-        else:
-            return '<Response>'
-
-
-def expand_args(command):
-    """Parses command strings and returns a Popen-ready list."""
-
-    # Prepare arguments.
-    if isinstance(command, basestring):
-        splitter = shlex.shlex(command, posix=True)
-        splitter.whitespace = '|'
-        splitter.whitespace_split = True
-        command = []
-
-        while True:
-            token = splitter.get_token()
-            if token:
-                command.append(token)
-            else:
-                break
-
-        command = map(shlex.split, command)
-
-    return command
-
-
-def run(command, data=None, timeout=None, env=None):
-    """Executes a given commmand and returns Response.
-
-    Blocks until process is complete, or timeout is reached.
-    """
-
-    command = expand_args(command)
-
-    history = []
-    for c in command:
-
-        if history:
-            # due to broken pipe problems pass only first 10MB
-            data = history[-1].std_out[0:10*1024]
-
-        cmd = Command(c)
-        out, err = cmd.run(data, timeout, env)
-
-        r = Response(process=cmd)
-
-        r.command = c
-        r.std_out = out
-        r.std_err = err
-        r.status_code = cmd.returncode
-
-        history.append(r)
-
-    r = history.pop()
-    r.history = history
-
-    return r
-
-
-def connect(command, data=None, env=None):
-    """Spawns a new process from the given command."""
-
-    # TODO: support piped commands
-    command_str = expand_args(command).pop()
-    environ = dict(os.environ).update(env or {})
-
-    process = subprocess.Popen(command_str,
-        universal_newlines=True,
-        shell=False,
-        env=environ,
-        stdin=subprocess.PIPE,
-        stdout=subprocess.PIPE,
-        stderr=subprocess.PIPE,
-        bufsize=0,
-    )
-
-    return ConnectedCommand(process=process)

test/distutils/setup.py

@@ -1,43 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-
-import os
-import sys
-import envoy
-
-try:
-    from setuptools import setup
-except ImportError:
-    from distutils.core import setup
-
-
-
-if sys.argv[-1] == "publish":
-    os.system("python setup.py sdist upload")
-    sys.exit()
-
-required = []
-
-setup(
-    name='envoy',
-    version=envoy.__version__,
-    description='Simple API for running external processes.',
-    author='Kenneth Reitz',
-    author_email='me@kennethreitz.com',
-    url='https://github.com/kennethreitz/envoy',
-    py_modules= ['envoy'],
-    install_requires=required,
-    license='MIT',
-    classifiers=(
-        'Development Status :: 5 - Production/Stable',
-        'Intended Audience :: Developers',
-        'Natural Language :: English',
-        'License :: OSI Approved :: MIT License',
-        'Programming Language :: Python',
-        'Programming Language :: Python :: 2.5',
-        'Programming Language :: Python :: 2.6',
-        'Programming Language :: Python :: 2.7',
-        # 'Programming Language :: Python :: 3.0',
-        # 'Programming Language :: Python :: 3.1',
-    ),
-)

test/django-1.3-skeleton/haystack/manage.py

@@ -1,14 +0,0 @@
-#!/usr/bin/env python
-from django.core.management import execute_manager
-import imp
-try:
-    imp.find_module('settings') # Assumed to be in the same directory.
-except ImportError:
-    import sys
-    sys.stderr.write("Error: Can't find the file 'settings.py' in the directory containing %r. It appears you've customized things.\nYou'll have to run django-admin.py, passing it your settings module.\n" % __file__)
-    sys.exit(1)
-
-import settings
-
-if __name__ == "__main__":
-    execute_manager(settings)

test/django-1.3-skeleton/haystack/settings.py

@@ -1,145 +0,0 @@
-# Django settings for haystack project.
-
-DEBUG = True
-TEMPLATE_DEBUG = DEBUG
-
-ADMINS = (
-    # ('Your Name', 'your_email@example.com'),
-)
-
-MANAGERS = ADMINS
-
-DATABASES = {
-    'default': {
-        'ENGINE': 'django.db.backends.', # Add 'postgresql_psycopg2', 'postgresql', 'mysql', 'sqlite3' or 'oracle'.
-        'NAME': '',                      # Or path to database file if using sqlite3.
-        'USER': '',                      # Not used with sqlite3.
-        'PASSWORD': '',                  # Not used with sqlite3.
-        'HOST': '',                      # Set to empty string for localhost. Not used with sqlite3.
-        'PORT': '',                      # Set to empty string for default. Not used with sqlite3.
-    }
-}
-
-# Local time zone for this installation. Choices can be found here:
-# http://en.wikipedia.org/wiki/List_of_tz_zones_by_name
-# although not all choices may be available on all operating systems.
-# On Unix systems, a value of None will cause Django to use the same
-# timezone as the operating system.
-# If running in a Windows environment this must be set to the same as your
-# system time zone.
-TIME_ZONE = 'America/Chicago'
-
-# Language code for this installation. All choices can be found here:
-# http://www.i18nguy.com/unicode/language-identifiers.html
-LANGUAGE_CODE = 'en-us'
-
-SITE_ID = 1
-
-# If you set this to False, Django will make some optimizations so as not
-# to load the internationalization machinery.
-USE_I18N = True
-
-# If you set this to False, Django will not format dates, numbers and
-# calendars according to the current locale
-USE_L10N = True
-
-# Absolute filesystem path to the directory that will hold user-uploaded files.
-# Example: "/home/media/media.lawrence.com/media/"
-MEDIA_ROOT = ''
-
-# URL that handles the media served from MEDIA_ROOT. Make sure to use a
-# trailing slash.
-# Examples: "http://media.lawrence.com/media/", "http://example.com/media/"
-MEDIA_URL = ''
-
-# Absolute path to the directory static files should be collected to.
-# Don't put anything in this directory yourself; store your static files
-# in apps' "static/" subdirectories and in STATICFILES_DIRS.
-# Example: "/home/media/media.lawrence.com/static/"
-STATIC_ROOT = ''
-
-# URL prefix for static files.
-# Example: "http://media.lawrence.com/static/"
-STATIC_URL = '/static/'
-
-# URL prefix for admin static files -- CSS, JavaScript and images.
-# Make sure to use a trailing slash.
-# Examples: "http://foo.com/static/admin/", "/static/admin/".
-ADMIN_MEDIA_PREFIX = '/static/admin/'
-
-# Additional locations of static files
-STATICFILES_DIRS = (
-    # Put strings here, like "/home/html/static" or "C:/www/django/static".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-# List of finder classes that know how to find static files in
-# various locations.
-STATICFILES_FINDERS = (
-    'django.contrib.staticfiles.finders.FileSystemFinder',
-    'django.contrib.staticfiles.finders.AppDirectoriesFinder',
-#    'django.contrib.staticfiles.finders.DefaultStorageFinder',
-)
-
-# Make this unique, and don't share it with anybody.
-SECRET_KEY = '@$87s&royz$nvav^3*$4u6^htybq*o=ge504rqp7r2)@ec*g(3'
-
-# List of callables that know how to import templates from various sources.
-TEMPLATE_LOADERS = (
-    'django.template.loaders.filesystem.Loader',
-    'django.template.loaders.app_directories.Loader',
-#     'django.template.loaders.eggs.Loader',
-)
-
-MIDDLEWARE_CLASSES = (
-    'django.middleware.common.CommonMiddleware',
-    'django.contrib.sessions.middleware.SessionMiddleware',
-    'django.middleware.csrf.CsrfViewMiddleware',
-    'django.contrib.auth.middleware.AuthenticationMiddleware',
-    'django.contrib.messages.middleware.MessageMiddleware',
-)
-
-ROOT_URLCONF = 'haystack.urls'
-
-TEMPLATE_DIRS = (
-    # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-INSTALLED_APPS = (
-    'django.contrib.auth',
-    'django.contrib.contenttypes',
-    'django.contrib.sessions',
-    'django.contrib.sites',
-    'django.contrib.messages',
-    'django.contrib.staticfiles',
-    # Uncomment the next line to enable the admin:
-    # 'django.contrib.admin',
-    # Uncomment the next line to enable admin documentation:
-    # 'django.contrib.admindocs',
-)
-
-# A sample logging configuration. The only tangible logging
-# performed by this configuration is to send an email to
-# the site admins on every HTTP 500 error.
-# See http://docs.djangoproject.com/en/dev/topics/logging for
-# more details on how to customize your logging configuration.
-LOGGING = {
-    'version': 1,
-    'disable_existing_loggers': False,
-    'handlers': {
-        'mail_admins': {
-            'level': 'ERROR',
-            'class': 'django.utils.log.AdminEmailHandler'
-        }
-    },
-    'loggers': {
-        'django.request': {
-            'handlers': ['mail_admins'],
-            'level': 'ERROR',
-            'propagate': True,
-        },
-    }
-}

test/django-1.3-skeleton/haystack/urls.py

@@ -1,17 +0,0 @@
-from django.conf.urls.defaults import patterns, include, url
-
-# Uncomment the next two lines to enable the admin:
-# from django.contrib import admin
-# admin.autodiscover()
-
-urlpatterns = patterns('',
-    # Examples:
-    # url(r'^$', 'haystack.views.home', name='home'),
-    # url(r'^haystack/', include('haystack.foo.urls')),
-
-    # Uncomment the admin/doc line below to enable admin documentation:
-    # url(r'^admin/doc/', include('django.contrib.admindocs.urls')),
-
-    # Uncomment the next line to enable the admin:
-    # url(r'^admin/', include(admin.site.urls)),
-)

test/django-1.3-skeleton/requirements.txt

@@ -1 +0,0 @@
-django==1.3

test/django-1.4-skeleton/haystack/settings.py

@@ -1,154 +0,0 @@
-# Django settings for haystack project.
-
-DEBUG = True
-TEMPLATE_DEBUG = DEBUG
-
-ADMINS = (
-    # ('Your Name', 'your_email@example.com'),
-)
-
-MANAGERS = ADMINS
-
-DATABASES = {
-    'default': {
-        'ENGINE': 'django.db.backends.', # Add 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'.
-        'NAME': '',                      # Or path to database file if using sqlite3.
-        'USER': '',                      # Not used with sqlite3.
-        'PASSWORD': '',                  # Not used with sqlite3.
-        'HOST': '',                      # Set to empty string for localhost. Not used with sqlite3.
-        'PORT': '',                      # Set to empty string for default. Not used with sqlite3.
-    }
-}
-
-# Local time zone for this installation. Choices can be found here:
-# http://en.wikipedia.org/wiki/List_of_tz_zones_by_name
-# although not all choices may be available on all operating systems.
-# On Unix systems, a value of None will cause Django to use the same
-# timezone as the operating system.
-# If running in a Windows environment this must be set to the same as your
-# system time zone.
-TIME_ZONE = 'America/Chicago'
-
-# Language code for this installation. All choices can be found here:
-# http://www.i18nguy.com/unicode/language-identifiers.html
-LANGUAGE_CODE = 'en-us'
-
-SITE_ID = 1
-
-# If you set this to False, Django will make some optimizations so as not
-# to load the internationalization machinery.
-USE_I18N = True
-
-# If you set this to False, Django will not format dates, numbers and
-# calendars according to the current locale.
-USE_L10N = True
-
-# If you set this to False, Django will not use timezone-aware datetimes.
-USE_TZ = True
-
-# Absolute filesystem path to the directory that will hold user-uploaded files.
-# Example: "/home/media/media.lawrence.com/media/"
-MEDIA_ROOT = ''
-
-# URL that handles the media served from MEDIA_ROOT. Make sure to use a
-# trailing slash.
-# Examples: "http://media.lawrence.com/media/", "http://example.com/media/"
-MEDIA_URL = ''
-
-# Absolute path to the directory static files should be collected to.
-# Don't put anything in this directory yourself; store your static files
-# in apps' "static/" subdirectories and in STATICFILES_DIRS.
-# Example: "/home/media/media.lawrence.com/static/"
-STATIC_ROOT = ''
-
-# URL prefix for static files.
-# Example: "http://media.lawrence.com/static/"
-STATIC_URL = '/static/'
-
-# Additional locations of static files
-STATICFILES_DIRS = (
-    # Put strings here, like "/home/html/static" or "C:/www/django/static".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-# List of finder classes that know how to find static files in
-# various locations.
-STATICFILES_FINDERS = (
-    'django.contrib.staticfiles.finders.FileSystemFinder',
-    'django.contrib.staticfiles.finders.AppDirectoriesFinder',
-#    'django.contrib.staticfiles.finders.DefaultStorageFinder',
-)
-
-# Make this unique, and don't share it with anybody.
-SECRET_KEY = '633$+yuh67kvt_v8gpi9zmkvqb*m5nts6&a=q^dwhi+e#^j_ki'
-
-# List of callables that know how to import templates from various sources.
-TEMPLATE_LOADERS = (
-    'django.template.loaders.filesystem.Loader',
-    'django.template.loaders.app_directories.Loader',
-#     'django.template.loaders.eggs.Loader',
-)
-
-MIDDLEWARE_CLASSES = (
-    'django.middleware.common.CommonMiddleware',
-    'django.contrib.sessions.middleware.SessionMiddleware',
-    'django.middleware.csrf.CsrfViewMiddleware',
-    'django.contrib.auth.middleware.AuthenticationMiddleware',
-    'django.contrib.messages.middleware.MessageMiddleware',
-    # Uncomment the next line for simple clickjacking protection:
-    # 'django.middleware.clickjacking.XFrameOptionsMiddleware',
-)
-
-ROOT_URLCONF = 'haystack.urls'
-
-# Python dotted path to the WSGI application used by Django's runserver.
-WSGI_APPLICATION = 'haystack.wsgi.application'
-
-TEMPLATE_DIRS = (
-    # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-INSTALLED_APPS = (
-    'django.contrib.auth',
-    'django.contrib.contenttypes',
-    'django.contrib.sessions',
-    'django.contrib.sites',
-    'django.contrib.messages',
-    'django.contrib.staticfiles',
-    # Uncomment the next line to enable the admin:
-    # 'django.contrib.admin',
-    # Uncomment the next line to enable admin documentation:
-    # 'django.contrib.admindocs',
-)
-
-# A sample logging configuration. The only tangible logging
-# performed by this configuration is to send an email to
-# the site admins on every HTTP 500 error when DEBUG=False.
-# See http://docs.djangoproject.com/en/dev/topics/logging for
-# more details on how to customize your logging configuration.
-LOGGING = {
-    'version': 1,
-    'disable_existing_loggers': False,
-    'filters': {
-        'require_debug_false': {
-            '()': 'django.utils.log.RequireDebugFalse'
-        }
-    },
-    'handlers': {
-        'mail_admins': {
-            'level': 'ERROR',
-            'filters': ['require_debug_false'],
-            'class': 'django.utils.log.AdminEmailHandler'
-        }
-    },
-    'loggers': {
-        'django.request': {
-            'handlers': ['mail_admins'],
-            'level': 'ERROR',
-            'propagate': True,
-        },
-    }
-}

test/django-1.4-skeleton/haystack/urls.py

@@ -1,17 +0,0 @@
-from django.conf.urls import patterns, include, url
-
-# Uncomment the next two lines to enable the admin:
-# from django.contrib import admin
-# admin.autodiscover()
-
-urlpatterns = patterns('',
-    # Examples:
-    # url(r'^$', 'haystack.views.home', name='home'),
-    # url(r'^haystack/', include('haystack.foo.urls')),
-
-    # Uncomment the admin/doc line below to enable admin documentation:
-    # url(r'^admin/doc/', include('django.contrib.admindocs.urls')),
-
-    # Uncomment the next line to enable the admin:
-    # url(r'^admin/', include(admin.site.urls)),
-)

test/django-1.4-skeleton/haystack/wsgi.py

@@ -1,28 +0,0 @@
-"""
-WSGI config for haystack project.
-
-This module contains the WSGI application used by Django's development server
-and any production WSGI deployments. It should expose a module-level variable
-named ``application``. Django's ``runserver`` and ``runfcgi`` commands discover
-this application via the ``WSGI_APPLICATION`` setting.
-
-Usually you will have the standard Django WSGI application here, but it also
-might make sense to replace the whole Django WSGI application with a custom one
-that later delegates to the Django one. For example, you could introduce WSGI
-middleware here, or combine a Django application with an application of another
-framework.
-
-"""
-import os
-
-os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
-
-# This application object is used by any WSGI server configured to use this
-# file. This includes Django's development server, if the WSGI_APPLICATION
-# setting points here.
-from django.core.wsgi import get_wsgi_application
-application = get_wsgi_application()
-
-# Apply WSGI middleware here.
-# from helloworld.wsgi import HelloWorldApplication
-# application = HelloWorldApplication(application)

test/django-1.4-skeleton/manage.py

@@ -1,10 +0,0 @@
-#!/usr/bin/env python
-import os
-import sys
-
-if __name__ == "__main__":
-    os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
-
-    from django.core.management import execute_from_command_line
-
-    execute_from_command_line(sys.argv)

test/django-1.4-skeleton/requirements.txt

@@ -1 +0,0 @@
-Django==1.4

test/django-1.5-skeleton/haystack/settings.py

@@ -1,156 +0,0 @@
-# Django settings for haystack project.
-
-DEBUG = True
-TEMPLATE_DEBUG = DEBUG
-
-ADMINS = (
-    # ('Your Name', 'your_email@example.com'),
-)
-
-MANAGERS = ADMINS
-
-DATABASES = {
-    'default': {
-        'ENGINE': 'django.db.backends.', # Add 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'.
-        'NAME': '',                      # Or path to database file if using sqlite3.
-        # The following settings are not used with sqlite3:
-        'USER': '',
-        'PASSWORD': '',
-        'HOST': '',                      # Empty for localhost through domain sockets or '127.0.0.1' for localhost through TCP.
-        'PORT': '',                      # Set to empty string for default.
-    }
-}
-
-# Hosts/domain names that are valid for this site; required if DEBUG is False
-# See https://docs.djangoproject.com/en/1.5/ref/settings/#allowed-hosts
-ALLOWED_HOSTS = []
-
-# Local time zone for this installation. Choices can be found here:
-# http://en.wikipedia.org/wiki/List_of_tz_zones_by_name
-# although not all choices may be available on all operating systems.
-# In a Windows environment this must be set to your system time zone.
-TIME_ZONE = 'America/Chicago'
-
-# Language code for this installation. All choices can be found here:
-# http://www.i18nguy.com/unicode/language-identifiers.html
-LANGUAGE_CODE = 'en-us'
-
-SITE_ID = 1
-
-# If you set this to False, Django will make some optimizations so as not
-# to load the internationalization machinery.
-USE_I18N = True
-
-# If you set this to False, Django will not format dates, numbers and
-# calendars according to the current locale.
-USE_L10N = True
-
-# If you set this to False, Django will not use timezone-aware datetimes.
-USE_TZ = True
-
-# Absolute filesystem path to the directory that will hold user-uploaded files.
-# Example: "/var/www/example.com/media/"
-MEDIA_ROOT = ''
-
-# URL that handles the media served from MEDIA_ROOT. Make sure to use a
-# trailing slash.
-# Examples: "http://example.com/media/", "http://media.example.com/"
-MEDIA_URL = ''
-
-# Absolute path to the directory static files should be collected to.
-# Don't put anything in this directory yourself; store your static files
-# in apps' "static/" subdirectories and in STATICFILES_DIRS.
-# Example: "/var/www/example.com/static/"
-STATIC_ROOT = ''
-
-# URL prefix for static files.
-# Example: "http://example.com/static/", "http://static.example.com/"
-STATIC_URL = '/static/'
-
-# Additional locations of static files
-STATICFILES_DIRS = (
-    # Put strings here, like "/home/html/static" or "C:/www/django/static".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-# List of finder classes that know how to find static files in
-# various locations.
-STATICFILES_FINDERS = (
-    'django.contrib.staticfiles.finders.FileSystemFinder',
-    'django.contrib.staticfiles.finders.AppDirectoriesFinder',
-#    'django.contrib.staticfiles.finders.DefaultStorageFinder',
-)
-
-# Make this unique, and don't share it with anybody.
-SECRET_KEY = '@w-1$9#jh05!qvbh#1k)c4=w9llcq116f$5(4&s_c)n4@%n=pc'
-
-# List of callables that know how to import templates from various sources.
-TEMPLATE_LOADERS = (
-    'django.template.loaders.filesystem.Loader',
-    'django.template.loaders.app_directories.Loader',
-#     'django.template.loaders.eggs.Loader',
-)
-
-MIDDLEWARE_CLASSES = (
-    'django.middleware.common.CommonMiddleware',
-    'django.contrib.sessions.middleware.SessionMiddleware',
-    'django.middleware.csrf.CsrfViewMiddleware',
-    'django.contrib.auth.middleware.AuthenticationMiddleware',
-    'django.contrib.messages.middleware.MessageMiddleware',
-    # Uncomment the next line for simple clickjacking protection:
-    # 'django.middleware.clickjacking.XFrameOptionsMiddleware',
-)
-
-ROOT_URLCONF = 'haystack.urls'
-
-# Python dotted path to the WSGI application used by Django's runserver.
-WSGI_APPLICATION = 'haystack.wsgi.application'
-
-TEMPLATE_DIRS = (
-    # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-INSTALLED_APPS = (
-    'django.contrib.auth',
-    'django.contrib.contenttypes',
-    'django.contrib.sessions',
-    'django.contrib.sites',
-    'django.contrib.messages',
-    'django.contrib.staticfiles',
-    # Uncomment the next line to enable the admin:
-    # 'django.contrib.admin',
-    # Uncomment the next line to enable admin documentation:
-    # 'django.contrib.admindocs',
-)
-
-# A sample logging configuration. The only tangible logging
-# performed by this configuration is to send an email to
-# the site admins on every HTTP 500 error when DEBUG=False.
-# See http://docs.djangoproject.com/en/dev/topics/logging for
-# more details on how to customize your logging configuration.
-LOGGING = {
-    'version': 1,
-    'disable_existing_loggers': False,
-    'filters': {
-        'require_debug_false': {
-            '()': 'django.utils.log.RequireDebugFalse'
-        }
-    },
-    'handlers': {
-        'mail_admins': {
-            'level': 'ERROR',
-            'filters': ['require_debug_false'],
-            'class': 'django.utils.log.AdminEmailHandler'
-        }
-    },
-    'loggers': {
-        'django.request': {
-            'handlers': ['mail_admins'],
-            'level': 'ERROR',
-            'propagate': True,
-        },
-    }
-}

test/django-1.5-skeleton/haystack/urls.py

@@ -1,17 +0,0 @@
-from django.conf.urls import patterns, include, url
-
-# Uncomment the next two lines to enable the admin:
-# from django.contrib import admin
-# admin.autodiscover()
-
-urlpatterns = patterns('',
-    # Examples:
-    # url(r'^$', 'haystack.views.home', name='home'),
-    # url(r'^haystack/', include('haystack.foo.urls')),
-
-    # Uncomment the admin/doc line below to enable admin documentation:
-    # url(r'^admin/doc/', include('django.contrib.admindocs.urls')),
-
-    # Uncomment the next line to enable the admin:
-    # url(r'^admin/', include(admin.site.urls)),
-)

test/django-1.5-skeleton/haystack/wsgi.py

@@ -1,32 +0,0 @@
-"""
-WSGI config for haystack project.
-
-This module contains the WSGI application used by Django's development server
-and any production WSGI deployments. It should expose a module-level variable
-named ``application``. Django's ``runserver`` and ``runfcgi`` commands discover
-this application via the ``WSGI_APPLICATION`` setting.
-
-Usually you will have the standard Django WSGI application here, but it also
-might make sense to replace the whole Django WSGI application with a custom one
-that later delegates to the Django one. For example, you could introduce WSGI
-middleware here, or combine a Django application with an application of another
-framework.
-
-"""
-import os
-
-# We defer to a DJANGO_SETTINGS_MODULE already in the environment. This breaks
-# if running multiple sites in the same mod_wsgi process. To fix this, use
-# mod_wsgi daemon mode with each site in its own daemon process, or use
-# os.environ["DJANGO_SETTINGS_MODULE"] = "haystack.settings"
-os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
-
-# This application object is used by any WSGI server configured to use this
-# file. This includes Django's development server, if the WSGI_APPLICATION
-# setting points here.
-from django.core.wsgi import get_wsgi_application
-application = get_wsgi_application()
-
-# Apply WSGI middleware here.
-# from helloworld.wsgi import HelloWorldApplication
-# application = HelloWorldApplication(application)

test/django-1.5-skeleton/manage.py

@@ -1,10 +0,0 @@
-#!/usr/bin/env python
-import os
-import sys
-
-if __name__ == "__main__":
-    os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
-
-    from django.core.management import execute_from_command_line
-
-    execute_from_command_line(sys.argv)

test/django-1.5-skeleton/requirements.txt

@@ -1 +0,0 @@
-django==1.5

test/django-1.6-skeleton/haystack/__init__.py

@@ -1 +0,0 @@
- 

test/django-1.6-skeleton/haystack/settings.py

@@ -1,156 +0,0 @@
-# Django settings for haystack project.
-
-DEBUG = True
-TEMPLATE_DEBUG = DEBUG
-
-ADMINS = (
-    # ('Your Name', 'your_email@example.com'),
-)
-
-MANAGERS = ADMINS
-
-DATABASES = {
-    'default': {
-        'ENGINE': 'django.db.backends.', # Add 'postgresql_psycopg2', 'mysql', 'sqlite3' or 'oracle'.
-        'NAME': '', # Or path to database file if using sqlite3.
-        # The following settings are not used with sqlite3:
-        'USER': '',
-        'PASSWORD': '',
-        'HOST': '', # Empty for localhost through domain sockets or '127.0.0.1' for localhost through TCP.
-        'PORT': '', # Set to empty string for default.
-    }
-}
-
-# Hosts/domain names that are valid for this site; required if DEBUG is False
-# See https://docs.djangoproject.com/en/1.5/ref/settings/#allowed-hosts
-ALLOWED_HOSTS = []
-
-# Local time zone for this installation. Choices can be found here:
-# http://en.wikipedia.org/wiki/List_of_tz_zones_by_name
-# although not all choices may be available on all operating systems.
-# In a Windows environment this must be set to your system time zone.
-TIME_ZONE = 'America/Chicago'
-
-# Language code for this installation. All choices can be found here:
-# http://www.i18nguy.com/unicode/language-identifiers.html
-LANGUAGE_CODE = 'en-us'
-
-SITE_ID = 1
-
-# If you set this to False, Django will make some optimizations so as not
-# to load the internationalization machinery.
-USE_I18N = True
-
-# If you set this to False, Django will not format dates, numbers and
-# calendars according to the current locale.
-USE_L10N = True
-
-# If you set this to False, Django will not use timezone-aware datetimes.
-USE_TZ = True
-
-# Absolute filesystem path to the directory that will hold user-uploaded files.
-# Example: "/var/www/example.com/media/"
-MEDIA_ROOT = ''
-
-# URL that handles the media served from MEDIA_ROOT. Make sure to use a
-# trailing slash.
-# Examples: "http://example.com/media/", "http://media.example.com/"
-MEDIA_URL = ''
-
-# Absolute path to the directory static files should be collected to.
-# Don't put anything in this directory yourself; store your static files
-# in apps' "static/" subdirectories and in STATICFILES_DIRS.
-# Example: "/var/www/example.com/static/"
-STATIC_ROOT = ''
-
-# URL prefix for static files.
-# Example: "http://example.com/static/", "http://static.example.com/"
-STATIC_URL = '/static/'
-
-# Additional locations of static files
-STATICFILES_DIRS = (
-    # Put strings here, like "/home/html/static" or "C:/www/django/static".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-# List of finder classes that know how to find static files in
-# various locations.
-STATICFILES_FINDERS = (
-    'django.contrib.staticfiles.finders.FileSystemFinder',
-    'django.contrib.staticfiles.finders.AppDirectoriesFinder',
-# 'django.contrib.staticfiles.finders.DefaultStorageFinder',
-)
-
-# Make this unique, and don't share it with anybody.
-SECRET_KEY = '@w-1$9#jh05!qvbh#1k)c4=w9llcq116f$5(4&s_c)n4@%n=pc'
-
-# List of callables that know how to import templates from various sources.
-TEMPLATE_LOADERS = (
-    'django.template.loaders.filesystem.Loader',
-    'django.template.loaders.app_directories.Loader',
-# 'django.template.loaders.eggs.Loader',
-)
-
-MIDDLEWARE_CLASSES = (
-    'django.middleware.common.CommonMiddleware',
-    'django.contrib.sessions.middleware.SessionMiddleware',
-    'django.middleware.csrf.CsrfViewMiddleware',
-    'django.contrib.auth.middleware.AuthenticationMiddleware',
-    'django.contrib.messages.middleware.MessageMiddleware',
-    # Uncomment the next line for simple clickjacking protection:
-    # 'django.middleware.clickjacking.XFrameOptionsMiddleware',
-)
-
-ROOT_URLCONF = 'haystack.urls'
-
-# Python dotted path to the WSGI application used by Django's runserver.
-WSGI_APPLICATION = 'haystack.wsgi.application'
-
-TEMPLATE_DIRS = (
-    # Put strings here, like "/home/html/django_templates" or "C:/www/django/templates".
-    # Always use forward slashes, even on Windows.
-    # Don't forget to use absolute paths, not relative paths.
-)
-
-INSTALLED_APPS = (
-    'django.contrib.auth',
-    'django.contrib.contenttypes',
-    'django.contrib.sessions',
-    'django.contrib.sites',
-    'django.contrib.messages',
-    'django.contrib.staticfiles',
-    # Uncomment the next line to enable the admin:
-    # 'django.contrib.admin',
-    # Uncomment the next line to enable admin documentation:
-    # 'django.contrib.admindocs',
-)
-
-# A sample logging configuration. The only tangible logging
-# performed by this configuration is to send an email to
-# the site admins on every HTTP 500 error when DEBUG=False.
-# See http://docs.djangoproject.com/en/dev/topics/logging for
-# more details on how to customize your logging configuration.
-LOGGING = {
-    'version': 1,
-    'disable_existing_loggers': False,
-    'filters': {
-        'require_debug_false': {
-            '()': 'django.utils.log.RequireDebugFalse'
-        }
-    },
-    'handlers': {
-        'mail_admins': {
-            'level': 'ERROR',
-            'filters': ['require_debug_false'],
-            'class': 'django.utils.log.AdminEmailHandler'
-        }
-    },
-    'loggers': {
-        'django.request': {
-            'handlers': ['mail_admins'],
-            'level': 'ERROR',
-            'propagate': True,
-        },
-    }
-}

test/django-1.6-skeleton/haystack/urls.py

@@ -1,17 +0,0 @@
-from django.conf.urls import patterns, include, url
-
-# Uncomment the next two lines to enable the admin:
-# from django.contrib import admin
-# admin.autodiscover()
-
-urlpatterns = patterns('',
-    # Examples:
-    # url(r'^$', 'haystack.views.home', name='home'),
-    # url(r'^haystack/', include('haystack.foo.urls')),
-
-    # Uncomment the admin/doc line below to enable admin documentation:
-    # url(r'^admin/doc/', include('django.contrib.admindocs.urls')),
-
-    # Uncomment the next line to enable the admin:
-    # url(r'^admin/', include(admin.site.urls)),
-)

test/django-1.6-skeleton/haystack/wsgi.py

@@ -1,32 +0,0 @@
-"""
-WSGI config for haystack project.
-
-This module contains the WSGI application used by Django's development server
-and any production WSGI deployments. It should expose a module-level variable
-named ``application``. Django's ``runserver`` and ``runfcgi`` commands discover
-this application via the ``WSGI_APPLICATION`` setting.
-
-Usually you will have the standard Django WSGI application here, but it also
-might make sense to replace the whole Django WSGI application with a custom one
-that later delegates to the Django one. For example, you could introduce WSGI
-middleware here, or combine a Django application with an application of another
-framework.
-
-"""
-import os
-
-# We defer to a DJANGO_SETTINGS_MODULE already in the environment. This breaks
-# if running multiple sites in the same mod_wsgi process. To fix this, use
-# mod_wsgi daemon mode with each site in its own daemon process, or use
-# os.environ["DJANGO_SETTINGS_MODULE"] = "haystack.settings"
-os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
-
-# This application object is used by any WSGI server configured to use this
-# file. This includes Django's development server, if the WSGI_APPLICATION
-# setting points here.
-from django.core.wsgi import get_wsgi_application
-application = get_wsgi_application()
-
-# Apply WSGI middleware here.
-# from helloworld.wsgi import HelloWorldApplication
-# application = HelloWorldApplication(application)

test/django-1.6-skeleton/manage.py

@@ -1,10 +0,0 @@
-#!/usr/bin/env python
-import os
-import sys
-
-if __name__ == "__main__":
-    os.environ.setdefault("DJANGO_SETTINGS_MODULE", "haystack.settings")
-
-    from django.core.management import execute_from_command_line
-
-    execute_from_command_line(sys.argv)

test/django-1.6-skeleton/requirements.txt

@@ -1 +0,0 @@
-django==1.6

test/no-requirements/setup.py

@@ -1,30 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-try:
-    from setuptools import setup
-except ImportError:
-    from distutils.core import setup
-
-required = ['httpbin']
-
-setup(
-    name='haystack',
-    version='0.0.1',
-    description='Simple API for running external processes.',
-    author='Kenneth Reitz',
-    author_email='me@kennethreitz.com',
-    install_requires=required,
-    license='MIT',
-    classifiers=(
-        'Development Status :: 5 - Production/Stable',
-        'Intended Audience :: Developers',
-        'Natural Language :: English',
-        'License :: OSI Approved :: MIT License',
-        'Programming Language :: Python',
-        'Programming Language :: Python :: 2.5',
-        'Programming Language :: Python :: 2.6',
-        'Programming Language :: Python :: 2.7',
-        # 'Programming Language :: Python :: 3.0',
-        # 'Programming Language :: Python :: 3.1',
-    ),
-)

test/not-django/requirements.txt

@@ -1 +0,0 @@
-flask==0.8

test/pylibmc/requirements.txt

@@ -1,2 +0,0 @@
-pylibmc
-psycopg2

test/simple-requirements/requirements.txt

@@ -1,2 +0,0 @@
-requests
-distribute==0.6.49

test/simple-runtime-pypy2/requirements.txt

@@ -1 +0,0 @@
-requests==2.2.1

test/simple-runtime-pypy2/runtime.txt

@@ -1 +0,0 @@
-pypy-2.3

test/simple-runtime-python2/requirements.txt

@@ -1 +0,0 @@
-requests==2.2.1

test/simple-runtime-python2/runtime.txt

@@ -1 +0,0 @@
-python-2.7.6

test/simple-runtime/requirements.txt

@@ -1 +0,0 @@
-requests==2.2.1

test/simple-runtime/runtime.txt

@@ -1 +0,0 @@
-python-3.4.0

vendor/bpwatch/bpwatch

@@ -1,4 +1,4 @@
-#!/usr/bin/env python2
+#!/usr/bin/python
 
 
 import os